Graphic design needs to deal with the color, brightness and image processing of graphics. , and need to configure a computer with fast operation speed and high overall configuration, especially on CPU, memory and graphics card, it is best to configure a flat panel display.

What kind of configuration you need depends on what you mainly do, such as some simple mechanical parts design, electrical shell design and programming. Generally, Lenovo, Dell and Hewlett-Packard brand machines on the market cost about 3,000 yuan (excluding monitors) with independent graphics cards. If large-scale modeling analysis and motion simulation, large-scale three-dimensional animation, large-scale scene special effects and large-scale rendering are carried out, higher requirements are put forward for computer configuration.

I don't know your hobbies and the local computer market, so it's inconvenient to write a configuration list. My suggestion is:

CPU has the greatest influence on the rendering speed of 1 and 3D, so invest as much money as possible on CPU and choose multi-core CPU to greatly improve the rendering speed. Try to use quad-core CPU or even eight nuclear CPU. It is recommended to use i5/i7 level.

2. The recommended graphics card type is DDR5 with 2GB of memory. It is best to use professional graphics cards, NVIDIAQuadroFX series or QuadroNVS series, which are high, medium and low, but expensive, but the effect and efficiency are not comparable to those of common game graphics cards on the market. You can also use a general graphics card, and N card is the first choice. Because most softwares such as 3DMAX and MAYA still use OpenGL as the graphical interface, N card has more advantages than A card in this respect.

3. Memory, minimum 4GB, 8GB recommended.

4, it is best to buy a flat panel display, 3DMAX rendering for post-processing, and the color of the old display is close to the printing color.

The demanding ones buy professional graphic LCD monitors, but the price is much more expensive. Brands with a screen size of more than 22 inches and a screen ratio of 16: 9 also have good results.

202 1 Modeling computer configuration?

When modeling and rendering, I will eat graphics cards, and all graphics cards are better.

CPU should have many cores, at least 4 cores.

Memory module 16G is activated.

500G NVME solid state, reading and writing can not be bad, brand model can not be bad.

If necessary, add a vertical mechanical hard disk.

Power supply depends on the graphics card, 1660s uses 500w for power supply, 2060/3060L uses 550w for power supply, and starts at 650w above 3070. Brand can not be bad, Zhenhua, Haiyun, poly cost-effective, Great Wall.

The chassis is arbitrary, and all the hardware needs to be installed, and the thickness of the chassis steel plate needs to be greater than 0.5 mm

Heat dissipation should be able to withstand CPU, about i5/r5 100, about i7/r7 200, and i9/r9 with wind cooling or 360 water cooling.

What are the requirements for laptop configuration for mathematical modeling?

The main hardware requirements of digital modeling for computers: CPU, memory and video memory. Among them, CPU requires larger FSB, higher main frequency and larger L2. It is best to have a large total memory capacity and a large memory. But today's notebooks can enjoy memory * * *, and a bigger memory is enough!

Does ps have high requirements for computers when making 3d models?

High requirements.

I5+2G or more independent display +8G or more memory, the most basic configuration requirements, can run these softwares normally. I7+GTX 1050T+ 16G memory+120G SSD+1T mechanical disk, relatively normal configuration.

If you only use lightweight modeling software such as CAD, Keyshot and Sketchup, you can use a slightly ordinary configuration, while if you need to use the next generation of 3d modeling software, such as 3Dmax building model, ZB carved high model, maya topology low model, mayaUV split, toolbag or SP baking diagram, SP drawing material, eight monkeys rendering, etc., the requirements for computer configuration are very high.

Generally speaking, 3d modeling has no special requirements for computer monitors, if there is no special interest in color. More memory in the computer configuration makes modeling more comfortable. It is suggested that 16g can use 8g first, and then add it if it is uncomfortable.

What computer configuration is needed for 3D game modeling?

A computer with the following configuration is enough for 3D modeling: CPU: E3 1230V2+0279 radiator: B4588 motherboard: MSIZH77A-G43599 motherboard memory: Weigang 8G 1600 single * 2360+360 hard disk: WD/KLOC-.

Three-dimensional modeling can be roughly divided into: NURBS and polygonal mesh.