Modern Arabic numerals are based on the decimal system, and use the notation of 0, 1, 2, 3, 4, 5, 6, 7, 8, 9*** 10. Take the position value method, the high position is on the left, the low position is on the right, and the writing is from left to right.
How to write other Arabic numerals for extended information:
① The writing of "1":from the upper right corner to the lower left corner.
② The writing of "2": Start with the pen and touch the line on the left, then touch the line up and to the right to form a semicircle, diagonally to the lower left corner and touch the line horizontally.
(3) The writing method of "3": the pen does not touch the line, but touches the line upward. Don't touch the line to the right, form a semicircle slightly (smaller than the semicircle at the upper end of 2), then go to the middle, stop above the dotted line, turn to the lower right to touch the line, touch the line down and bend to the left to touch the line.
How to write "4": Draw a diagonal line to the left from the middle of the upper line to the lower grid 1/3, and then cross it after touching the left line and touching the right line. The second stroke goes straight down from the top right without touching the right line, but touching the bottom line below.
⑤ The writing method of "5": from the upper left line to the left, slightly to the upper corner of the middle grid, and then to the right, draw a large semicircle beyond the center line to touch the right line, and the lower limit to touch the left line. The upper line is a little below the upper line and touches the right line to the right.
How to write "6": draw an arc from the upper line to the right, to the left and down, touch the left line and the bottom line, and then draw a small circle upward. The small circle exceeds the dotted line, so you can't write the circle too small.
⑦ How to write "7": Level the upper line, from the upper left corner to the upper right corner, and then bend diagonally to the end, touching the lower line on the left in the middle.
⑧ The writing method of "8": From the right up to the left semicircle, and the other from the right down, touch the right line, the off line and the left line, then go up, and intersect the original line above the dotted line until the straight line is slightly away from the place where the pen is written near the upper right corner. (8 unsealed)
9. How to write "0": Draw an arc to the left from the middle of the upper line, draw an arc to the lower line, draw an arc to the upper line, and draw an arc upward to intersect with the starting point.