Analysis of problem-solving ideas

The first question: related data: length, width and height.

In this project: the "length" and "height" data in the original annex 1 are designed for the height of the medicine storage cabinet, that is, the distance between the diaphragms; Length and Width are used to calculate the width of the medicine cabinet slot.

When answering the first question, first make a table: the statistical table of the relationship between the height and width of the medicine cabinet. Assuming that 1mm is a unit, it will be stratified in 5 units. See the following table for specific data: (table 1)

In the above table, we can get the scale of the relationship between the height and width of the medicine box every 5 units.

The first question, the minimum width is the minimum width +4mm unit in stepless, and the minimum height is the maximum height +2mm unit, and the same is true. Let's solve the maximum width and height. In the table 1, there is already a "maximum width", which is the maximum value on the surface, but it is actually not the maximum value.

Maximum width: here, we need to find the minimum value of diagonal length, width and width in each stage and compare it with the maximum width in table 1, whichever is smaller, this value is the maximum width in each stage.

Maximum height: the maximum height in the same level is the maximum height in each level by comparing the minimum values of diagonal lines of Length and Height with the maximum height in table 1, whichever is smaller.

Through this calculation, we can get the range of width and height of each layer.

This question 1 requires that the spacing types of vertical baffles should be at least, that is, the spacing of vertical baffles should be the same as possible. In the width range of each level obtained above, the width size within the same range (that is, the intersection of the values in each level) is the width and height answer required by this question. In addition, when selecting the range in the table, you can see the number of types and the corresponding suite specifications of each type, which I believe you can see yourself. You can see the types and specifications of drugs you need through screening.

(I suggest that attachment 1 and attachment 2 can be combined in one table for future use. )

(There is no specific problem-solving process here)