Annual Work Plan for Work Safety 1 I. Guiding ideology
Fully implement the spirit of the Party's Tenth Congress, thoroughly implement Scientific Outlook on Development, adhere to the concept of safe development, and persist in? Safety first, prevention first and comprehensive treatment? Policy, comprehensively implement the spirit of safety production conferences at all levels and rural and agricultural work conferences, earnestly strengthen the construction of safety production rules and regulations, solidly carry out all work of agricultural safety production, further strengthen the concept of safety development, strengthen the implementation of the responsibility system for safety production, pay close attention to the rectification of potential safety hazards, deepen the special rectification of safety production, realize the sustained and stable improvement of agricultural safety production situation in our region, and provide guarantee for the healthy and stable development of agriculture and rural economy in our region.
Second, the work objectives
Ensure that there are no casualties in organs and system units; Ensure that major safety accidents do not occur in the agriculture, animal husbandry and aquatic products industry in our region; Put an end to the serious accidents of group death and group injury. Further improve the level of safety management, lay a solid foundation for safety production, and explore the establishment of a long-term management mechanism for agricultural safety production.
Three. work arrangement
(a) to strengthen safety publicity and education, strengthen the awareness of safety development. First, make use of various channels to vigorously publicize the spirit of the important instructions of the CPC Central Committee and the State Council on strengthening work safety, publicize the scientific concept of safe development, and publicize the principles, policies, laws and regulations on work safety. The second is to carry out? Caring for life and developing safely? Themed? Safe production month? During the activities, we should pay special attention to the publicity of the Law on Safety in Production and the Law on the Quality of Agricultural Products, and mobilize the whole society to pay more attention to, support and participate in the supervision of agricultural safety in production. Third, combined with the implementation of the Sunshine Project and other projects, we should do a good job in safety education and training for agricultural employees, especially migrant workers.
(two) to establish and improve the responsibility system for production safety. Formulate and improve the responsibility system for production safety, and follow the work objectives of production safety and? Who's in charge? Who's in charge? Principles and? Cross to the side, vertical to the end? Demand, responsibility to people. The main person in charge of this unit is the first person in charge of production safety within the scope of responsibilities of this department and this unit. Are the deputies and other deputies in charge of production safety strictly enforced? One post and two responsibilities? , directly responsible for the safety in production within the scope of duties. It is necessary to incorporate safety in production into the work plan of the unit, establish and improve various rules and regulations, strictly manage people with the system, and manage things with the system to promote the further standardization and institutionalization of agricultural safety management.
(3) Strengthen the quality and safety monitoring of agricultural products. First, we must do a good job in the quality and safety management of agricultural products production sources. On the basis of strengthening the quality control of the whole process of agricultural products before, during and after delivery, we will focus on the source management and earnestly strengthen the source management of agricultural products. Actively implement the accounting system for the purchase, sale and use of agricultural inputs. It is also necessary to strengthen spot checks on the quality of agricultural inputs and severely punish illegal production, sale or use of agricultural inputs. The second is to intensify the implementation of agricultural standardization. Strengthen the standardization knowledge training of agricultural extension personnel and producers, operate in strict accordance with the technical regulations of agricultural production, and comprehensively improve the level of agricultural standardization. Third, we must do a good job in quality and safety supervision of agricultural products. It is necessary to implement the filing system of agricultural products production according to law, strengthen the traceability management of agricultural products quality and safety, actively promote and use organic, low-toxic and low-residue pesticides in agricultural products production, and actively apply new agricultural standardization technologies such as biological and ecological pest control technologies to ensure the quality and safety of agricultural products.
(four) seriously carry out special treatment of agricultural counterfeiting. It is necessary to deeply understand the importance of agricultural anti-counterfeiting work, put agricultural anti-counterfeiting as the focus of rectifying and standardizing the regional economic order into the important agenda, take the initiative to take the lead, adhere to and improve the linkage mechanism, give full play to the role of agricultural anti-counterfeiting coordination agencies at all levels, negotiate and solve problems in the work in time, and ensure that all measures of agricultural anti-counterfeiting work are implemented.
(five) to strengthen the construction of emergency rescue, enhance the ability of emergency handling of unexpected accidents. Give full play to the important role of emergency rescue teams in responding to natural disasters and accidents, comprehensively improve their ability to respond to various emergencies, reduce casualties and losses caused by emergencies, and strengthen the construction of emergency rescue teams for major animal epidemics and major plant diseases.
(six) strict holiday duty system to ensure holiday safety. During major events and holidays, it is necessary to strictly implement the duty system and the leadership shift system to ensure that personnel are in place and information is smooth. The personnel on duty are required to stick to their posts, earnestly perform their duties, do a good job in safety management, and make records and reports on duty. In case of danger or accident, we should promptly organize forces to carry out emergency rescue and proper disposal, and report the relevant situation step by step according to regulations.
Fourth, safeguard measures.
(a) to strengthen the organization and leadership of production safety. Further improve the agricultural machinery safety production management institutions, timely adjust and supplement the members of the leading group for safety production, and continuously strengthen the construction of agricultural machinery safety management team and organizational system.
(2) Improve the safety production management mechanism. Establish and improve the information feedback and early warning mechanism of agricultural safety production, timely and accurately submit and feedback accident information and work dynamics. Strictly implement the duty system, improve emergency response capability and accident handling efficiency. Hold a working meeting every quarter to analyze the situation and study the work; Listen to the safety production report once every six months.
(3) Increase investment in production safety. Increase investment in the purchase of agricultural safety production infrastructure and technical transformation, and constantly improve the conditions for safe production; Give priority to the construction funds of safety production management system to ensure the normal operation of all work of safety production; Actively explore the establishment of emergency fund for production safety to ensure timely rectification of hidden dangers of accidents in key agricultural areas.
Annual Work Plan for Work Safety II. Establish standards and set work targets for 20 years.
(a), workshop objectives:
Safety and environmental protection, no accidents, pursuing Excellence and building harmony.
(2) Main objectives:
1, main indicators: First, the annual sulfur packaging capacity is planned to be 200,000 tons; 2. Indicators such as fresh water, electricity and energy consumption (omitted).
2, sulfur molding, packaging, transportation 100% to complete the annual plan; The qualified rate of sulfur factory and excellent spot check is100%; The equipment intact rate is 99.99%, and the equipment accident is zero; Safety and environmental protection production to prevent accidents from being concealed, to achieve? 303 rate? .
3. Go all out to ensure the safety, environmental protection and economic start-up of120,000 tons/year sulfur molding and packaging device (Phase II), realize the production scale of 220,000 tons/year sulfur as a food additive, and become the largest sulfur producer in China.
4. Strengthen the staff's ideological management and technical training, constantly improve the overall quality of the team, create excellence, catch up with learning, strive for the first place and build harmony.
Second, pursue the overall plan of bidding and achieving the goal.
1, grab the team, lead the team, and inspire the fighting spirit. First, in the construction of leading bodies. We build? Four good teams? With this as the goal, by advancing with the times, the team members' professionalism, sense of responsibility and innovative spirit will be improved, and the workshop leadership team will be cultivated into a team with fine management, strong ability and great contribution, leading employees to catch up with and surpass the advanced level of similar devices in China Petrochemical Company. The second is in the construction of the staff. We will strengthen the education and management of all migrant workers, and at the same time strengthen the education and management of workers to further stimulate the labor force? Catch up with your studies and strive for the first place? The fighting spirit brings out a team of workers who can be safe, stable, dare to be advanced and be the first to ensure the realization of workshop goals.
2, grasp the safety tree environmental protection to ensure the standard. First, strengthen safety and environmental protection education. Further improve employees' awareness of safety, self-protection and environmental protection, strive to build the largest sulfur production base of food additive in China, and make contributions to the company's safety and environmental protection construction. Second, do a good job in the implementation of various systems, especially the handover inspection system, to ensure the safe and stable production of the device. Organizational development? Team duty security officer? Activities, widely mobilize employees to carry out HSE observation, from their own? Old and bad? Start with the phenomenon, carefully discover and correct what is around you? Three violations? Behavior, completely eliminate their habitual illegal behavior, establish? I want safety? 、? Everyone is a safety officer, and everyone is the first person responsible for safety? The concept of. The third is to do a good job in investigation and rectification of hidden dangers. Each team reports hidden dangers once a month, and the workshop organizes evaluation, especially the hidden dangers in production equipment, which are investigated by professional teams and teams. Four, do a good job in the operation and management of the main operational links, according to? Four sexes and one state? Management requirements, strict implementation of the system of leading cadres, to ensure the safety of production in special and emergency situations. Fifth, insist on doing a good job in the workshop? Monthly inspection? And team (day) inspection of team posts, and strive to promote the implementation of QHSE responsibilities. The workshop will focus on safety production, and implement the safety production responsibility of each post into daily production management to ensure? One post and one responsibility system? It is necessary to implement it in practice, and include workers in the rights and obligations of enjoying the same education and training, the same management assessment, and the same rewards and punishments as all migrant workers in the work of safety production, so as to form a good situation in which all employees participate and everyone is responsible for safety production. Sixth, do a good job in the safety management and contractor management of direct operation links to ensure the construction safety of each operation link.
3, grasp the management, to achieve the goal of fine assessment. First, establish and improve the bidding management system. Used for workshop implementation? Chase the bid? Measures: The workshop revised the new management system according to the current management practice: the professional group reported the progress of index completion to the workshop leaders every week, analyzed the existing problems and explained the management measures for next week; The workshop director makes a report to the professional group once a week. Chase the bid? Give detailed opinions on the management situation, and give specific guidance to all professional groups and all managers; Hold an energy-saving and efficiency-enhancing management analysis meeting for cadres above the team leader once a month, organize a comprehensive inspection once a month, and implement it in workshops and teams. Chase the bid? Make detailed comments on the situation to ensure that the bidding work is in place. The second is to give full play to the role of various assessment systems. On the basis of earnestly summing up all the management work this year, the workshop revised all the management systems, focused on the improvement of economic and technical indicators and the construction of staff in the process of production management, strengthened the assessment, closely cooperated and communicated with various professions, and implemented cost tracking control. If any abnormality is found, it will be corrected immediately and efforts will be made to reduce costs and expenses. Fully mobilize the enthusiasm of all employees for safety and environmental protection, optimize operation, increase output, save energy and reduce consumption, save water and reduce emissions, and deliver goods accurately to ensure the realization of various objectives in the workshop.
Third, the specific measures to win the bid and achieve the goal
1, strengthen production process management. The main measures are as follows: first, aiming at the serious corrosion of cooling water pipeline of molding machine (mainly manifested as under-scale corrosion), optimize the process flow and operation to reduce the scaling of cooling water pipeline and equipment corrosion; Second, continue to save water and electricity, further strengthen the water quality change of two sets of circulating cooling water for sulfur molding and packaging, and control the fresh water below 500 tons/month while ensuring the water quality requirements and meeting the product quality; Third, do a good job in the revision of process technical regulations and post operation methods and the preparation of the commencement plan of the second phase of the project; Fourth, do a good job in the training and preparation for the commencement of the second phase project of 2# sulfur forming plant to ensure the safety, environmental protection, economy and high efficiency; Fifth, continue to organize competitions such as learning to catch up with ultra-small indicators; Sixth, adhere to market orientation, optimize two sets of sulfur molding and packaging operations, mobilize the enthusiasm of employees, and increase production and reduce consumption.
2. Refine the field equipment management. The main measures are as follows: First, deepen TnPM management, reduce equipment failure rate, create first-class environment and create good working conditions for employees. Ensure the safe and economical operation of the equipment; The second is to refine the on-site management of the team, improve the environment and carry out? One leveling, two clearing, three looking at four and not lacking five? Check the appraisal activities; Third, carry out reasonable suggestions, organize to add relay fans for 1 molding machine to solve the problem of poor ventilation affecting the environment, and add dust removal devices for two molding machines for ventilation; Fourth, the production process and equipment are technically tackled and reformed, and the problems affecting production and safety, such as easy cracking of the steel belt of the pellet forming machine, poor feeding of two packaging machines, impact on metering and output, and corrosion of cooling water pipes under scale, are technically tackled and reformed.
3. Optimize production, increase the total amount of packaging, and produce more high value-added products. The first is to optimize the reasonable arrangement of production. The first set of sulfur molding packaging is based on the load of sheet forming machine, and more sheet forming machines are opened and less granular forming machines are opened to save the amount of anti-adhesive agent. Turn on less equipment with high power consumption and save electricity. Second, in the case of large liquid sulfur treatment capacity, stop the granulator shift as much as possible; 3. The second sulfur molding and packaging device (new sulfur) produces industrial-grade and food additive sulfur according to market demand.
4. The key points of the second sulfur molding and packaging device are as follows: 1. Is there a new fuser for sulfur packaging? And then what? Add a metal detector to the new sulfur packaging line to detect sulfur products? ; The second is the second set of sulfur molding and packaging (new sulfur) project in the second phase. The liquid sulfur pipeline is mixed with hot steam, and the overhead trap is used for drainage and condensation, and the auxiliary line valve of the liquid sulfur pipeline is equipped with an operating platform; Thirdly, in the second phase of sulfur molding and packaging (new sulfur) project, a large-scale liquid sulfur circulating pipeline is added, that is, the reflux pipeline from the front of the molding machine to the combined sulfur pit, so as to reduce the influence on the liquid sulfur pipeline after the molding machine stops;
5. Pay attention to the measurement management of sulfur packaging. First, in the case of large measurement error of packaging electronic scales, manual correction of adding and subtracting packaging quantity is carried out, assessment rules are refined, and workshop sampling inspection and assessment are strengthened; The second is to strengthen the management of receiving and delivering packages of shipping classes and production teams; The third is to carry out the quality measurement competition of the production team; Fourth, the workshop staff should be trained in the concept of quality measurement, so that each employee can establish the concept of quality measurement, let employees consciously abide by it and realize independent management. The accurate weight of sulfur packaging is 50. 15kg/ bag, and the factory qualified rate of products is two 100%.
6. Pay special attention to energy saving and consumption reduction. First, replace all ordinary lighting lamps in 1# and 2# sulfur plants with LED lighting lamps. The total power of incandescent lamps used in 1# and 2# sulfur plants is 26.4kwh and 35.2kwh respectively, and all of them are replaced by LED lamps. According to the power saving effect of 15%, 9.5kwh of electricity can be saved every day, which reduces the energy consumption of the equipment. The second is to optimize the lighting of 2# sulfur warehouse. Optimize the electricity consumption of 2# sulfur molding and packaging, and implement subsection and partition management for sulfur warehouse lighting to achieve the best power saving. The third is to recover steam condensate. DG 100 pipeline is connected to 1# sulfur molding device, and the steam condensate recovery pump in the liquid sulfur tank area of the northern pipeline of sulfur packaging plant directly recovers the condensate accompanied by heating steam and the condensate heated by the molding machine. The fourth is to improve the efficiency of the trap. Improve the effective utilization rate of steam traps. Five, carry forward the packaging workshop? Picking sesame seeds? Spirit, control the quantity and amount of each item consumed by various expenses in the workshop, use every penny reasonably and correctly, reduce expenses and ensure that the monthly progress index does not exceed the standard.
7. Strengthen the supervision and management of product delivery. First, we should refine the management system of product delivery to ensure that? Tripartite? Supervise accurate delivery; The second is to refine the sulfur loading management system and on-site express delivery to improve the service quality of the window; Third, continue to standardize the stacking method, implement the loading confirmation system, ensure the accuracy of outbound transportation, and realize the zero package damage rate; Fourth, do a good job in weighing management of automobile sulfur products; Fifth, guided by market demand and benefit, the production and delivery of food-grade sulfur and industrial-grade sulfur can be changed at any time to adapt to the rapid changes in the sales market.
8. Go all out to ensure the safe, environmentally friendly and economical start-up of the 6.5438+200,000 tons/year sulfur molding and packaging device (Phase II). First, set up a leading group for the start-up preparation of the new plant, headed by the workshop director, who will be fully responsible for all the preparations before the new plant is put into production to ensure that all the preparations are completed as planned; Second, draw lessons from the successful experience of the existing 654.38+10,000 tons/year sulfur molding and packaging device (Phase I) before its construction and commissioning, and focus on the compilation of technical data such as design drawing review, equipment selection, personnel training, commencement plan, technical regulations and operation methods; Third, according to the current production situation of the workshop and the actual composition of employees, strive for new post personnel to be in place as soon as possible or give policy support to ensure that new equipment, new posts and new personnel can be trained as planned; The fourth is to strengthen training. Training methods are divided into basic theoretical knowledge training, professional knowledge training, counterpart device training, on-site technical training, forklift training and so on. These trainings include related safety, fire fighting, anti-virus, environmental protection knowledge and basic skills training. Among them, on-site training also includes post operation method learning, trial operation scheme learning, on-site familiarity with equipment, on-site simulation operation, anti-accident drills and so on.
Annual Work Plan for Safety in Production 3 In order to further strengthen traffic safety in production, improve traffic safety awareness, prevent and reduce production safety accidents, and promote stable economic development, combined with the actual situation of our county, the work plan for traffic system safety in production is formulated.
I. Guiding ideology
With the party? Ten x big? 、? Ten x big? And then what? Theory of Three Represents theory? We should take Theory of Three Represents as the guide, implement Scientific Outlook on Development, comprehensively promote the safety production management of transportation system, strengthen social management, enhance traffic safety awareness, and further strengthen the safety production work of county transportation industry with a high sense of political responsibility. Create a safe, civilized and smooth road traffic environment for the county economy to take off again.
Second, the main points of work
(1) improve the scientific management level of the traffic system, implement the project of smooth road traffic, ensure the traffic safety of the people and the safety of life and property, and put an end to it? Serious traffic accident? The occurrence of; Reduce the number of general accidents and minor accidents;
(two) to increase the publicity of traffic safety laws and regulations and traffic safety knowledge, and to carry out social management of traffic safety with traffic safety publicity and education and the implementation of road traffic safety law as the carrier;
(3) Strengthening study and training, focusing on traffic system staff, road transport practitioners, crew members, heads of highway construction enterprises, safety officers and highway maintenance personnel, and carrying out traffic safety production knowledge training to comprehensively improve traffic safety awareness;
(four) to further strengthen the leadership and supervision of law enforcement activities of maritime departments, transportation departments and highway departments to ensure the smooth development of traffic safety production management;
(5) Maritime departments and transportation departments should improve the three-level ledger, establish dynamic management registration, and make the ledger accurate, strict and scientific;
(6) Continue to strictly rectify and prevent traffic accidents, strengthen road monitoring, intensify road inspections, strictly investigate and deal with serious illegal acts such as illegal operation and overload, and effectively control traffic accidents from the source;
(7) Strengthen supervision and strictly control road transportation? Three customs and one supervision? , seriously implement? Three customs and one supervision? Job responsibilities, strengthen source management and strictly implement it? Three don't enter the station, _ leave the station? Management system, strengthen road transport safety supervision;
(eight) strengthen the inspection of road transport, effectively supervise the road transport market, and maintain the order of the road transport market according to law;
(9) The maritime department should highlight the inspection and on-site supervision and management of key time periods, key ships and key waters, establish and improve a long-term mechanism for the safety management of ferries, and ensure that no major accidents occur.
(ten) do a good job in the safety production of highway construction enterprises and highway maintenance departments. Conduct regular and irregular supervision and inspection of key departments, key parts, construction sites and major machinery and equipment, and handle problems in time when found. Seriously investigate and deal with violations of discipline.
(eleven) to strengthen the inspection of highway departments, and earnestly safeguard the right of way; Remediation of illegal buildings on both sides of the road, occupation of roads, threshing and drying grain, piling up sundries, etc., timely removal of roadblocks to ensure safe and smooth roads.
Third, the work measures
(a) to strengthen the management of safety objectives, clear responsibility for traffic safety. Continue to execute? One post and two responsibilities? Pay close attention to the full implementation of the responsibility system for traffic safety production, sign the responsibility book for production safety objectives with relevant units and departments, quantify the indicators of traffic safety publicity and education, incorporate them into the year-end responsibility system assessment of relevant units and departments, and regularly check and assess the traffic safety work of various units.
(two) actively carry out publicity and education, improve the traffic safety publicity mechanism. Conscientiously carry out traffic safety publicity and education activities, and widely publicize the Highway Law of People's Republic of China (PRC), Regulations on the Management of Inland River Traffic Safety in People's Republic of China (PRC), Regulations on Waterway Transportation in People's Republic of China (PRC) and Regulations on Road Transportation of the People's Republic of China through news media, radio, publicity panels, distribution of publicity materials and organization of meetings.
(3) Strengthen supervision and inspection to form a working pattern of * * * management. Assist superior functional departments to handle the traffic safety production responsibilities of subordinate units and vehicle units, handle the traffic safety production matters assigned by leading departments at all levels, rectify the outstanding problems of traffic safety production with universality, and deal with traffic safety production accidents with great influence and wide coverage. Four don't let go? In principle, carry out supervision and inspection. At the same time, it is necessary to strengthen the publicity, guidance, inspection and supervision of the work of traffic safety in grass-roots units, hold regular meetings of traffic safety in grass-roots units, listen to work reports, organize the exchange of experience in grass-roots units, and promote the improvement of the management level of traffic safety in production.
Fourth, the job requirements
(a) to strengthen the organization and leadership, overall arrangement, classification guidance, and promote the coordinated development of traffic safety production.
(two) to strengthen the cooperation between higher and lower levels, all units should formulate the work plan of traffic safety production, cooperate closely, give full play to their functions, form a joint force, communicate information, and improve the management level of traffic safety production.
(three) to strengthen supervision and inspection, under the guidance of the office of the Bureau of production safety leading group, organize regular inspections on the work safety of each unit, find and solve problems in time, sum up experience, and promote the healthy development of traffic safety.
?