2. Cut the sticker with the same size as the drawing, and then find the blank of the drawing on the back of the drawing. When you look at it under the light, you stick double-sided tape on the blank that needs to be cut and evenly distribute it on the back of the drawing. Put two pieces of paper face up, and stick the picture above and the sticker below together, as long as the two pieces of paper don't stagger halfway.
3. Then you can start paper cutting. Cut unnecessary blanks along the drawing (that is, where there is double-sided tape). It is suggested to dig a hole in the middle and then cut along the edge.
4. After all the cutting, there should be no glue between the two pieces of paper, which will naturally separate and you will be done.