The MG 3 is equipped with a 68kW 1.3L naturally aspirated engine and an 80kW 1.5L naturally aspirated engine, matched with a 5-speed MT gearbox and a 5-speed AMT gearbox, with a maximum power/speed kw/rpm of 68/6000 and a maximum torque/speed nm/rpm118/500.
Length/width/height: mm 4018/1728/17, wheelbase: mm2520, fuel standard No.93 (Jing No.92) gasoline, and suspension system adopts McPherson independent suspension /H-type torsion beam semi-independent suspension.
Extended information maintenance of MG 3 engine;
1. Clean the air filter. Check the air filter when the car travels 5000 kilometers. If there is too much dust on the filter element, compressed air can be blown out from the inside of the filter element to clean the dust. The pressure of compressed air should not be too high to avoid damaging the filter paper. When cleaning the air filter, do not use water or oil to prevent oil and water from polluting the filter element.
2. Changing the oil and oil filter regularly is also an important process of engine daily maintenance. Oil products of any quality grade will change during use. After reaching a certain mileage, the parts will wear out, which will bring faults to the engine and reduce its performance. In order to avoid failure, the oil should be changed regularly according to the mileage, and the amount of oil should be moderate (generally it is better to be slightly lower than the upper limit of the oil meter).
Baidu encyclopedia -MG 3