Many friends called to inquire about the operation steps of the full-spectrum direct reading spectrometer before buying it, so as to have a general understanding of it, know which auxiliary equipment to buy and how to operate it accurately. In this way, you can know fairly well when you buy it, and you can also operate it directly after you buy it, but the spectrum analyzers of different manufacturers are different. The following is the operation of the fifth generation spectrum analyzer. It can be divided into two simple steps: sample preparation and one-bond excitation.

Which is the full spectrum direct reading spectrometer? Before the operation of spark direct reading spectrometer, it is necessary to prepare auxiliary equipment for related detection, use a bottle of pure argon for detection, and then place cooling equipment such as air conditioner indoors, so that the detection results will be affected by the high temperature in summer. Secondly, it is necessary to polish the sample with a grinder for observation. The general steps are as follows. When polishing the sample, first of all, there should be no bubbles in the poured sample as much as possible to ensure the accuracy of the refractive spectrum when the spark direct reading spectrometer is excited. Then use a cutting machine or other equipment to take out the sample surface and polish it. During the polishing process, the sample should be balanced with the grinder platform to ensure that no light flows out from the joint of the two during the later inspection. When grinding after zui, use sandpaper with different meshes to grind in turn.

Then put the polished sample away from the excitation light of the full-spectrum direct reading spectrometer, because the material curve of the spectrometer has been set before leaving the factory, and it can be detected only by clicking excitation in the later stage, and the operator can operate without experience. Mainly press dry to fix, turn on the instrument, click a key to excite, and wait for about 30 seconds to get the result. In this way, even if the enterprise operators are handed over and replaced, there is no need for long-term training handover.