Pay attention to safety when using forklift. Whenever you use a forklift, you should pay attention to pedestrians. Driving a forklift even requires signing a safety responsibility letter. The following is what I bring to you. Welcome to read the reference. Let's have a look!

one

The forklift safety responsibility book uses the forklift model Toyota 7FBR 18, Japan. I have received safety training for battery forklift trucks, mastered operating skills and safety knowledge, and I promise to do the following in my work:

First, strictly abide by the provisions of the battery forklift equipment maintenance system to ensure equipment and personal safety.

Second, carry out safety inspection before getting on the bus, so as to ensure that all aspects meet the safety requirements, so that the vehicle does not drive with illness, and ensure that the vehicle safety device is complete and effective; When the brake, steering, lighting system, horn and reversing alarm of the forklift are defective, stop using the forklift; Do not adjust the speed limit and other protective devices of the forklift without authorization, and do not repair the forklift without authorization.

Three, consciously abide by the safety operation procedures of this position, to ensure that there is no illegal operation, reckless adventure, illegal command, no human security risks, no harm to yourself, no harm to others, no harm to others.

Four, it is forbidden to irrelevant personnel, unlicensed personnel operating forklift, forklift manned.

5. Forklift is only used as loading machinery and factory delivery, not for long-distance transportation.

Six, wear and use labor protection articles correctly, have the responsibility to stop and correct others' illegal operations, adventures and other unsafe behaviors, and have the right to refuse the command, scheduling and arrangement that does not meet the safety requirements or violates the rules and regulations.

Seven, the loading and lifting shall not exceed the * * * specified by the forklift, the loading shall be even and balanced, the maximum height shall not exceed 2m, the driving speed shall not exceed the speed specified by the manufacturer, the horn shall be honked as required when turning, and the weight of the transported goods shall not exceed 1750kg.

Eight, after the completion of the work or after the completion of the work, park the forklift in the designated safe area or next to the charger, put down the fork in accordance with the provisions, turn off the power door switch, remove the key, lock the steering wheel, and confirm the safety before you get off work.

I promise to strictly implement the safety operation rules and post safety responsibilities in my work, resolutely implement the safety management regulations and work according to the training requirements. If I don't work according to the training requirements, I am willing to bear the corresponding responsibility and punishment. Signature of the promisor:

date month year

two

In order to use the forklift safely, put an end to forklift accidents, and ensure the realization of the goal of safe production, this letter of responsibility is specially signed with the forklift operator according to the relevant regulations on safe production and equipment use management.

A, abide by the forklift operation procedures

1, go

1. 1 When starting, check whether there are people and obstacles around, and then honk the horn to start.

1.2 When the forklift truck starts loading, the operator must first confirm that the loaded goods are stable and reliable. Start slowly and slowly.

Step 2 drive

2. 1 forklift speed ≤10 km/h;

2.2 When the forklift is running, no one is allowed to get on or off, and no one is allowed to stand on the forklift. When it is really necessary for forklift assistants to work, they should be equipped with special safety devices for forklifts, and the forks should be inserted into the special fixing grooves below the safety devices.

2.3 At intersections or narrow intersections, you should go slow and stop at any time by honking your horn.

2.4 When entering or leaving the job site or driving on the road, pay attention to whether there are obstacles above. You can't turn sharply and brake suddenly in non-emergency situations.

2.5 Empty uphill and downhill: If you drive uphill, you need to go uphill backwards and fork downhill, so the center of gravity falls on the front wheel.

3. Homework

3. 1 Overloading and unbalanced driving are strictly prohibited.

3.2 When loading and unloading goods, the brake must be started from the fork bearing to the stable bearing, and vice versa.

3.3 Run slowly, and it is forbidden to load goods with impact.

3.4 It is forbidden to hang the goods in the air after parking. After unloading, lower the fork to the normal driving position before driving.

3.5 When loading goods with forks, the weight of the goods should be shared equally between the two forks, and the goods should not be skewed, and one side of the goods should be posted on the shelf. Small pieces of goods should be put into container boards to prevent them from falling. The goods loaded on the forklift shall not obstruct the operator's sight. If it obstructs the operator's vision, you should back up and drive slowly. If you encounter a slope, you should not reverse the car. There should be a person there directing the fork to move forward.

3.6 When the fork approaches or exits the goods, the speed should be slow and steady. Pay attention to the wheel not to crush the goods, pad the wooden pallet and fork head, and not to scratch the cargo support personnel.

3.7 During the lifting or driving of the forklift, it is forbidden for anyone to stand on the forklift to take things or play a balancing role. When forklift forks are lifted, no one is allowed within the fork radius 1 meter.

3.8 When transporting goods that affect the line of sight or goods that are easy to slip, you should reverse the car and drive at a low speed.

stop

4. 1 Forklift trucks must be parked in designated areas when not in use, and should

Lower the fork to the lowest position, tighten it, then brake and cut off the circuit.

4.2 Forklift trucks cannot be parked next to emergency exits, exits and fire-fighting facilities.

4.3 When the forklift is not used temporarily, turn off the power supply and pull down the brake. Try to avoid stopping on the slope. If it is unavoidable, plug the wheels with other reliable objects and tighten the handbrake.

Second, comply with the provisions of safe driving

1. forklift operators prepare for forklift operation every day.

1. 1 Clean the dirt, dirt and dust on the forklift. The key parts are: the fork frame and slideway of the gantry, the starter, the electrode fork column of the battery, the battery and the battery replenishment liquid.

1.2 Check the fastening of all parts, focusing on: fork bracket, chain tension screw, wheel screw, wheel fixing pin, brake and steering gear screw.

1.3 Check the reliability and flexibility of the foot brake and steering gear.

1.4 Check the leakage, focusing on: pipe joint, lifting cylinder, tilting cylinder, steering gear, etc.

2. When the forklift operator finds that the forklift is abnormal or has obvious faults, he should immediately stop using it and report to the designated personnel for repair. The forklift shall not be allowed to work with diseases.

3. Forklift operators must receive professional training and hold a forklift operation certificate.

4. The forklift truck shall be kept by the forklift operator designated by the user department. No one shall operate the forklift truck without the consent of the department head and the keeper.

5. Forklift operators must pay attention to rest after work and concentrate on their work to avoid damaging buildings, doors and goods, and avoiding serious accidents such as casualties, collapse of goods and leakage of dangerous goods.

Third, education and training.

1. Strictly implement the operation procedures to ensure traffic safety;

2. Actively participate in the training of production skills and safety knowledge and regulations, and cultivate a rigorous work style;

3. According to the provisions of the safety supervision, regular inspection and assessment of mount guard operation certificate.

Fourth, responsibility.

Forklift truck operators who violate the above regulations, causing damage to goods and property or casualties, will be punished and compensated according to the relevant regulations of the company, depending on the seriousness of the case, until legal responsibility is investigated.

Five, this responsibility in duplicate, a center, a forklift operator. The execution time is from year month day to year month day.

* * * * * Signature of Leader: Signature of forklift operator:

Date: Year Month Day Date: Year Month Day

three

First, strictly abide by the provisions of the battery forklift equipment maintenance system to ensure equipment and personal safety.

Second, carry out safety inspection before getting on the bus, so as to ensure that all aspects meet the safety requirements, so that the vehicle does not drive with illness, and ensure that the vehicle safety device is complete and effective; When the brake, steering, lighting system, horn and reversing alarm of the forklift are defective, stop using the forklift; Do not adjust the speed limit and other protective devices of the forklift without authorization, and do not repair the forklift without authorization.

Three, consciously abide by the safety operation procedures of this position, to ensure that there is no illegal operation, reckless adventure, illegal command, no human security risks, no harm to yourself, no harm to others, no harm to others.

Four, it is forbidden to irrelevant personnel, unlicensed personnel operating forklift, forklift manned.

5. Forklift is only used as loading machinery and factory delivery, not for long-distance transportation.

Six, wear and use labor protection articles correctly, have the responsibility to stop and correct others' illegal operations, adventures and other unsafe behaviors, and have the right to refuse the command, scheduling and arrangement that does not meet the safety requirements or violates the rules and regulations.

Seven, load, lifting shall not exceed the provisions of the forklift truck * * *, the load is even and balanced, no sudden acceleration and sudden braking operation, the maximum speed shall not exceed the speed specified by the manufacturer, the steering shall be honked as required, and the weight of the goods transported shall not exceed the provisions of the forklift truck * * *.

Eight, after the completion of the work or after the completion of the work, park the forklift in the designated safe area or next to the charger, put down the fork in accordance with the provisions, turn off the power door switch, remove the key, lock the steering wheel, and confirm the safety before you get off work.

Strictly implement the safety operation rules and post safety responsibilities at work, resolutely implement the safety management regulations and work according to the training requirements. Forklift leader: year month day.

Article 4: forklift driver's responsibility book for production safety

A, abide by the forklift, forklift operation procedures.

1 When starting, it is necessary to check whether there are people and obstacles around, and then honk the horn to start. At night or in foggy days, if the line of sight is not good, you should turn on the headlights, whistle slowly, and someone will help you show the way if necessary.

At the beginning of loading, the driver should first confirm that the loaded goods are stable and reliable. Start slowly and slowly.

During the execution, no one is allowed to get on or off the bus, and no one is allowed to stand on the fork. When forklift assistants really need to work, they should be equipped with a special hanging basket for forklift trucks, and the forks should be inserted into the special fixing grooves below the hanging basket.

4 At intersections or narrow intersections, you should drive slowly and stop at any time by honking your horn. The safe driving speed of the factory is 5 km/h, so you must drive safely at a low speed when entering the production workshop.

5 When entering or leaving the job site or driving on the road, pay attention to whether there are obstacles above. You can't turn sharply and brake suddenly in non-emergency situations. 6 It is forbidden to drive with overload or partial load.

7 When loading and unloading goods, the braking must be started from the beginning of the fork to the stable load, and vice versa.

8 Run slowly, and it is forbidden to load goods with impact.

It is forbidden to hang the goods in the air after parking. After unloading, lower the fork to the normal driving position before driving.

10 fork when approaching or withdrawing goods, the speed should be slow and steady. Be careful that the wheels do not crush the goods, slip the pallet and fork head, and do not scratch the cargo support personnel.

1 1 When lifting or driving, it is forbidden for anyone to stand on the fork to take objects or play a balancing role. When forklift forks are lifted, no one is allowed within the fork radius 1 meter.

12 When carrying articles that affect your vision or are easy to slip, you should back up and drive at a low speed.

13 Forklift trucks cannot be parked next to emergency passages, exits and fire-fighting facilities. When the vehicle is not used temporarily, turn off the power supply and pull down the brakes. 14 because there are many flammable, explosive and toxic substances in our factory, drivers are required to pay attention to the surrounding environment during driving and handling, and keep within an effective safety protection distance from the storage tanks and pipelines of flammable, explosive and toxic substances to avoid safety accidents caused by misoperation.

Second, comply with the provisions of safe driving

1, actively participate in business study and safety study, consciously abide by traffic rules, obey the command of management personnel, drive in a civilized manner, be safe and polite, and have no violations and accidents.

2. Love your job, obey secondment, observe labor discipline, do not leave without leave, and be on call.

3. Take good care of vehicles, adhere to regular inspection and maintenance, and do not drive vehicles with diseases to ensure driving safety.

4, in accordance with the provisions, do a good job of vehicle maintenance, keep the car clean and tidy, and the car is in good condition.

5. Seriously implement the company's rules and regulations, strictly abide by traffic rules, establish the idea of safety first, and ensure production safety.

6. No drinking during working hours; Prohibition of drunk driving; It is not allowed to give the car to a non-driver.

Three. Those who violate the above provisions will be punished as appropriate, and the company reserves the right to recover the losses.

IV. This Responsibility Letter is made in duplicate, one for the responsible person and one for the safety and environmental protection department of the company.

Signature of Manager of Safety and Environmental Protection Department: Signature of Safety Section Chief:

four

In order to implement the policy of "safety first, prevention first and comprehensive treatment" and clarify the responsibilities of forklift workers, this agreement is signed by both parties through consultation:

Objective: To reduce casualties caused by poor management, operation and maintenance of motor vehicles in factories and ensure the safety of workers in the production process. Forklift drivers must abide by the following regulations. Forklift drivers will take full responsibility for safety accidents caused by violating the following regulations.

The relevant provisions are as follows:

1. Before driving the forklift, you must pass the examination of relevant departments, obtain the operation certificate of special type of work issued by * * * organization, and strictly abide by the following safety operation procedures.

2. Must seriously study and strictly abide by the operating rules, familiar with the vehicle efficiency and road conditions in the operation area. Master the basic knowledge and skills of forklift maintenance, and do a good job of vehicle maintenance according to regulations.

3. It is forbidden to drive with people, and it is forbidden to drive after drinking; No eating or chatting while driving; Don't talk on your cell phone while driving.

4. Vehicles should be strictly inspected before use, and it is forbidden to drive with faults, and it is forbidden to forcibly pass through dangerous or potentially dangerous sections.

Forklift truck safety requirements

First, check the vehicle.

1. Before and after forklift operation, check the appearance and add fuel, lubricating oil and cooling water.

2. Check the safety performance of starting, running and braking.

3. Check whether the lights and horn signals are complete and effective.

4. Check whether the pressure and temperature during the operation of the forklift are normal.

5. After the forklift truck is executed, the external leakage should be checked and the seal should be replaced in time.

Second, start.

1. Before starting, observe the surroundings, and after confirming that there are no obstacles that hinder driving safety, whistle before starting.

2. For vehicles with hydraulic pneumatic braking, the brake hydraulic barometer must reach a safe state before starting.

3. When the forklift truck starts loading, the driver should first confirm that the loaded goods are stable and reliable.

4. Start slowly and slowly.

Third, drive.

1. When driving, the height between the bottom of the fork and the ground should be kept at 300 ~ 400 mm, and the gantry should lean backwards.

Don't lift the forklift too high when driving. Pay attention to whether there are obstacles in the air when entering or leaving the job site or on the way. When carrying goods, the fork is not allowed to rise too high, which will affect the stability of the forklift.

3. After unloading, drop the fork to the normal driving position before driving.

4. When turning, if there are pedestrians or vehicles nearby, you should send out the driving signal first. It is forbidden to turn sharply at high speed, which will cause the vehicle to lose lateral stability and tip over.

5. It is forbidden to turn off the engine when the forklift is driving downhill, and it is forbidden to brake suddenly when the load is driving under special circumstances.

6. Forklift trucks must abide by the traffic rules of the factory and keep a safe distance from the vehicles in front.

7. When the forklift truck is executed, the load must be at the lowest position that does not hinder the driving, and the gantry should be tilted back appropriately. The load shall not be increased except when stacking or loading.

8. The load height shall not block the driver's sight. Special circumstances affect the forward-looking time, and drive at a low speed when reversing.

9. Don't turn on the ramp, and don't drive across the ramp.

10. The safe driving speed of forklift factory is 5km/h, so it is necessary to drive safely at low speed when entering the production workshop area.

1 1. When the forklift is lifting or driving, it is forbidden for people to stand on the fork to take things and play a balancing role.

12. If any problem is found, repair it in time and report it. Never work with illness or hide it. Forklift drivers must strictly observe the control of vehicles, and irrelevant personnel are not allowed to drive vehicles.

Fourth, loading and unloading

1. When the goods are loaded into the forks, the distance between the two forks should be adjusted according to the needs, so that the load of the forks is balanced and not skewed, and one side of the goods should be attached to the retaining frame.

2. It is forbidden to work with a single fork or lift or pull things with a fork. Under special circumstances, safety warning signs must be set to remind pedestrians around.

3. In the process of loading and unloading goods, the forklift must be braked by a brake.

4. The speed should be slow and steady, and be careful that the wheels don't crush the articles to pad the wood, so as to avoid the crushed objects stretching and hurting people.

5. When forking goods, the fork should be as deep as possible under the goods, and pay attention to the fact that the fork tip cannot touch other goods or objects. The minimum back inclination angle of gantry should be adopted to stabilize the load, so as to avoid sliding backwards after the load. When reducing the load, the gantry can lean forward a little, which is convenient for placing the load and pulling the fork.

6. It is forbidden to fork goods at high speed, and it is forbidden to hit hard objects with fork heads.

7. Forklift fork frame operation, it is forbidden to stand around the fork frame, in order to avoid the collapse of goods.

8. It is forbidden to overload, it is forbidden to use a fork to lift personnel engaged in aerial work, so as to avoid falling accidents.

9. It is not allowed to use the brake inertia to slide, put, wind or roll easily.

10. Forks, turnover boxes and pallets are not allowed to be used for unloading.

Five, leave the forklift

1. It is forbidden to leave the forklift when the goods on the fork are suspended. Before leaving the forklift, you must unload the goods or lower the fork frame.

2. Pull the parking brake handle to the end or press the hand brake switch.

3. Engine flameout and power failure.

4. Unplug the key.

Six, parking matters needing attention

1. Before the engine is turned off, the engine should be idling.

Turn off the engine after 2.2-3 minutes. After the engine stops, tighten the brake handle.

3. When the low temperature season is below zero, the cooling water should be discharged.

4. Clean and wipe the forklift, and after routine maintenance, park it in the garage or designated place.

I have fully understood the above forklift safety operation procedures and will ensure compliance. If there is any violation or loss, it will bear the responsibility of the corresponding economic punishment of the department. Those who cause safety accidents voluntarily assume full responsibility.

Person in charge of Emgrand Building Materials Co., Ltd. (signature or seal):

Forklift Worker (signature or seal):

Contact telephone number of forklift workers:

Signing time: year month day

five

XX Municipal Bureau of Quality and Technical Supervision:

In order to conscientiously implement the national work policy of "safety first, prevention first", implement the Law on Work Safety, the Regulations on Safety Supervision of Special Equipment and other laws and regulations, and ensure the safe implementation of special equipment, our unit promises:

First, strictly implement the Regulations on Safety Supervision of Special Equipment and the provisions of safety production laws and administrative regulations to ensure the safe use of special equipment. Ensure that there will be no accidents that cause workers' deaths or direct economic losses of more than 654.38+10,000 yuan due to special equipment accidents with great social impact, such as boilers, pressure vessels, pressure pipes, elevators, lifting machinery, forklifts and large amusement facilities.

Two, the use of special equipment that meets the requirements of safety technical specifications. Before putting special equipment into use, check the design documents, product certificates, installation and maintenance instructions, supervision and inspection certificates and other documents.

Three, in accordance with the provisions, set up special equipment safety management institutions or equipped with full-time, * * safety management personnel, establish and improve the special equipment safety management system and post safety responsibility system. Ensure the necessary safety and energy-saving investment.

Fourth, take the initiative to register the use of special equipment. Special equipment with serious hidden dangers, no renovation and maintenance value or exceeding the service life specified in safety technical specifications shall be scrapped and cancelled in time.

Five, the establishment of special equipment safety technical files, regular daily maintenance of special equipment in use, and regular self-inspection. Boiler users should treat the boiler with water medium according to the requirements of safety technical specifications, and accept the regular inspection of the water medium treatment by inspection and testing institutions.

Six, according to the specified time to apply for regular inspection. Special equipment without regular inspection or unqualified inspection shall not continue to be used.

Seven, special equipment failure or abnormal situation, to conduct a comprehensive inspection, eliminate hidden dangers of accidents, can be put into use again.

Eight, the special equipment management personnel and operators of special equipment safety, energy-saving education and job training, obtain the special operation certificate of personnel can engage in the corresponding operation or management work.

Nine, the development of special equipment safety management system and accident emergency special plan, and regular accident emergency drills, drill records.

Ten, after the special device accident, immediately start the accident emergency plan, organize rescue, prevent the accident from expanding, reduce casualties and property losses, and timely report to the quality and technical supervision department and relevant departments in accordance with the provisions.

XI。 In order to implement the safety management of the above-mentioned special equipment, the unit promises to sign the responsibility book of safety production objectives with relevant departments, workshops, teams and employees at the same time.