Fire safety education and training system? Fire inspection and inspection system? Safety evacuation facilities management system? Fire control facilities and equipment maintenance management system? F
Fire safety education and training system? Fire inspection and inspection system? Safety evacuation facilities management system? Fire control facilities and equipment maintenance management system? Fire hazard rectification
It can be combined into 1 fire safety management system, fire safety education and training system 1, and set up fire knowledge bulletin boards, hold knowledge contests every year and other forms to improve the fire safety awareness of all employees. 2. Organize employees to learn fire laws and regulations on a regular basis, so as to achieve fire control according to law. 3. Conduct fire safety education and training according to the characteristics of different posts. 4. Conduct on-site demonstration and training for the maintenance and use personnel of fire control facilities. 5. Conduct pre-job fire protection training for new employees, and take up their posts only after passing the examination. 6. Employees must be re-educated and trained before changing jobs due to work needs. Second, the fire patrol inspection system 1, implement the fire safety responsibility system step by step and the post fire safety responsibility system, and implement the patrol inspection system. 2. The centralized fire management functional department shall conduct fire inspection on the restaurant every day. Conduct a fire inspection on the restaurant once a month, and review and follow up the improvement. 3. If a fire hazard is found in the inspection, the inspector shall fill in the fire inspection record and require the relevant personnel to sign the record in accordance with the regulations. 4. The inspectors shall inform the inspected department of the inspection in time, and each responsible person shall inform the daily fire safety inspection. If there is a fire hazard in this restaurant, it should be rectified in time. 5. If the fire hazards found in the inspection are not rectified in time according to the specified time, they will be punished according to the reward and punishment system. Three. Safety evacuation facilities management system 1. Units should keep evacuation passages and exits unblocked, and it is strictly forbidden to occupy evacuation passages, and it is strictly forbidden to set fences and other obstacles that affect evacuation at exits or entrances. 2. Fire safety evacuation signs and emergency lighting facilities that meet the requirements of the state shall be set according to the specifications. 3 fire doors, fire safety evacuation signs, emergency lighting, mechanical smoke exhaust and air supply, fire accident broadcasting and other facilities should be kept in normal condition, and regular inspection, testing, maintenance and maintenance should be organized. 4. It is forbidden to lock the safety exit during business or work. 5. It is strictly prohibited to close, block or cover the safety evacuation sign during business or work. Four. Management system for fire control facilities and equipment maintenance 1. Full-time administrators are responsible for the daily use and management of fire control facilities. Full-time management personnel check the use of fire control facilities every day to keep the facilities clean, hygienic and in good condition. 2. The property management department is responsible for the maintenance and regular technical inspection of the technical performance of fire-fighting facilities and fire-fighting equipment, and has a part-time administrator to conduct daily inspection of fire-fighting facilities. If any abnormality is found, report to the property in time and arrange maintenance to keep the equipment in good technical condition. 3. Regular inspection of fire-fighting facilities and fire-fighting equipment: (1) The Property Management Department is responsible for organizing the inspection of smoke and temperature alarm systems, with the participation of the Security Department, and each smoke and temperature sensor is inspected at least once a year in turn. (2) Positive pressure air supply and smoke control system shall be tested once every six months. (3) Indoor fire hydrant and spray water flow test shall be conducted once every quarter. (4) The test time of other fire-fighting equipment shall be determined according to different situations. 4. Fire fighting equipment management: (1) Fire extinguishers shall be inspected and replaced twice a year during winter defense and summer defense. (2) Designate a special person to regularly manage and inspect the fire-fighting equipment to ensure that it is in good condition. (3) Check the fire-fighting equipment frequently, and replenish it immediately if it is found to be lost or damaged. V. Fire hazard rectification system 1. The existing fire hazards should be eliminated in time. 2, in the fire safety inspection, deal with the fire hazards found item by item registration, and hidden dangers rectification within a time limit, at the same time to make records of hidden dangers rectification. 3. Before the fire hazards are eliminated, preventive measures should be implemented to ensure fire safety during the rectification of the hazards. 4, the public security fire control institutions shall be ordered to correct the fire hazards within a prescribed time limit, should be corrected within the prescribed time limit and write a reply to the hidden dangers rectification, submitted to the public security fire control institutions. Intransitive verb fire safety management system 1. Safety management of electricity consumption: (1) It is forbidden to pull wires at will, and overload electricity consumption. (2) Electrical wiring and equipment installation shall be the responsibility of the certified electrician. (3) After work, turn off all power supplies. (4) Private use of high-power electrical appliances such as electric heating rods and electric furnaces is prohibited. 2. Fire safety management: (1) Strictly implement the hot work approval system. If hot work is really necessary, you should apply to the property department for a "hot work permit" as required. (2) Before hot work, the inflammable and explosive dangerous goods within 5 meters near the hot spot should be removed or properly isolated, and appropriate types and quantities of fire-fighting equipment should be prepared for standby at any time. Approval date of Beijing Co., Ltd.: 20 years.