The adjustment process of Euro590 tag number: press M twice → press the up key → find the CONFIGUREDRIVE menu, and press M once → find the CONFIGUREENABLE menu. Press m once → press up key to change DISABLE to ENABLE (at this time, the operation panel light flashes) → press e key once to exit → press down key once again → find NOMMOTORVOLTS menu (armature voltage), press m key to enter, (use up and down keys to input motor armature voltage: see motor nameplate), and press e key once to exit. Press the down key again → find the ARMATURECURRENT menu → press the m key to enter (use the up and down keys to input the rated current of the motor: see the motor nameplate as XXXA), press the e key once to exit → press the down key again → find the FIELDCURRENT menu (excitation current) → press the m key to enter (use the up and down keys to input the motor excitation current: see the motor nameplate as XXXA). Press the E key once to exit, and then press the Down key once to find the FLD. CTRLMODE menu (excitation control mode), then press M key to enter (use the up and down keys to select voltage control or current control, and our company selects current control mode), press E key once to exit, and then press down key once to find FLD. VOLTSRATIO menu (this parameter needs to be set when selecting excitation voltage ratio) → (Input voltage ratio with up and down keys = motor excitation voltage/input voltage), press E key once to exit, press Down key three times to find SPEEDFBKSELECT menu (speed feedback selection), and then press M key to enter (use up and down keys to select armature voltage feedback ARMCOLTSFBK and tachogenerator feedback ANALOGTACH). After setting, press the E key once to exit and find the configurable menu. Change ABLE to DISABLE (the panel light stops flashing at this time), and finally save the set parameters. Press the E key all the time to exit, then press the M key and the up and down keys to find the parameter saving menu, press the M key to enter, and press the up key to automatically save the parameters.