Installation of sliding window opener
The push rod of window opener can be made of stainless steel according to customer's requirements; Travel, push and pull, surface color can be customized according to customer needs; Before the window opener is installed, it can be electrified to run back and forth, and it can be installed only after checking whether the window opener is in good condition; Before installing the window opener, check whether the opening stroke of the window is greater than that of the window opener and whether the window opens normally; When installing the sash fixing seat, the center of the fixing seat and the center of the sash should be kept coincident; In the process of opening the window opener, the tail of the window opener will swing with the mounting bracket, and it cannot contact with the window frame or other structural parts at this time; Disconnect the power supply of the controller before the window opener works to prevent the risk of electric shock; When the window opener is running, don't put your hands between the window frame and the sash to prevent the danger of pinching your hands; The installation of the window opener must be carried out by professionally trained personnel who must be familiar with the technical parameter standards and safety standards of the intelligent window control system.
Working principle of sliding window opener
1, when the electric retarder and window opener are installed horizontally by the same device seat, it is used to open and close the middle suspended skylight.
2. When used to open and close the side window, the electric reducer is installed on the wall at the lower part of the middle suspension side window and is the main mechanism. At this time, there are two kinds of window openers: the upper part is used to open high-row window sashes, and the middle part is used to open middle-row window sashes.
3. The power of window opening is transmitted by linkage steel pipe. The horizontal output shaft of the window opener is equipped with a transmission steel pipe and a switch, which are connected with the opening and closing of the window sash respectively, and the operation is controlled by the limit switch after it is in place.
4. Main components of electric window opener: The electric window opener is mainly composed of electric reducer, electric cabinet and switch. The utility model has strong practicability: an electric window opener can realize the opening and closing of multiple windows, which can greatly reduce the engineering cost and the use and maintenance cost. An intelligent electric window opener is not only beautiful and atmospheric, but also suitable for people's urban life today.
With the help of the window opener, the sliding window can be well applied, everyone's safety can be guaranteed, and it is more reassuring to use. The safety problem of sliding window is really big, and there are many hidden dangers. The biggest problem is the problem of opening windows. With the window opener, all problems can be solved, but even so, everyone should be careful in life. The window opener will open and close indoors. Everyone must turn off the window opener when sleeping, otherwise there will still be security risks.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~