Prepare two smaller square pieces of paper of the same size, as well as pens and glue. Fold your head first, fold one diagonal of a square piece of paper, open it, fold the other diagonal, and don't open it.

Fold the top corner of the outer side to the bottom edge, and then fold the left and right corners to it respectively.

Fold the folded corner obliquely downward, just grasp the folding angle yourself, and then fold the small corner between the two corners upward.

Turn the paper over, the two corners are the ears of the cat, then fold the bottom corner up at the height of the ears, then fold the corners down, and then draw the eyes, nose and beard with strokes, so that the head is broken.

Fold another square piece of paper into a diagonal, open it, align both sides of one corner of the diagonal with the diagonal, and fold it inward respectively.

Fold up and down, and the pointed end folds down. The length and angle of folds should be controlled by themselves, generally longer than the bottom edge. Then, open it and sink the sharp corner into the origami according to the crease.

Fold this sharp corner again as a cat's tail, and the folding angle can also be adjusted by itself.

Finally, stick the two together with a glue stick or glue, and a kitten that can stand will be folded.

What is needed above is a square paper cut from A4 paper, and scissors (or art knife) are also needed, because it will be cut from the middle.

Figure 2 above is obliquely folded in half from the middle, leaving only a small crease on the left. I'm very sorry here, because the following pictures are marked in the wrong order, but this does not affect the process.