Method for hide word system:
The shoelace passes through the hole 12 on the left, and the length of the shoelace is the distance between the two holes.
The shoelace passes through the hole 12 on the left, and then passes through the hole 34 from the inside.
Repeat the above steps until the left side is completely worn.
A shoelace on the lower left goes through the hole on the right, and then goes through the hole on the top from the inside.
Double interleaving method;
Shoelaces go straight through the left and right 1 holes, and the length of shoelaces on both sides is the same.
The shoelace on the right goes through the third hole on the left, from outside to inside, and then from inside to the second hole.
Wear the left shoelace as the right shoelace. Look at the picture carefully.
Then the left 2-hole shoelace goes from the outside to the right 4 holes, and then from the inside to the 3 holes. This step is very important, and so is the rest.
Double twill:
Shoelaces pass through the hole 12 on the right, with both ends of shoelaces aligned, and other shoes pass through the left.
The shoelace passes through the hole 12 on the left, and then through the hole l on the right.
Repeat the above steps until the right side is completely worn.
A shoelace on the lower right goes through the hole on the left, and then goes through the hole on the top from the inside.
Interleaving method of zipper:
Shoelaces go straight through the left and right holes from above, and the length of male belts on both sides is one.
The shoelace is wound around the hole 1 from the top down,
The shoelace on the right goes around the second one on the right from the left, and then,
After the right side is put on, the left side is also up, and then it is finished.
Lightning system method:
Insert the toe cap directly from the bottom (gray part) and go out from the bottom of each shoe hole. Through the shoelaces, and then through the other two holes. Repeat this process until the shoelace passes through the two holes above.
A word system method:
Thread the toe cap directly from the bottom (gray part) and out from the top of each shoe hole. The toe cap goes through the bottom, through the second pair of shoe holes from bottom to top, and then through the top, and then inserted into the third pair of shoe holes. Repeat this process until the shoelace passes through the two holes above.
Cobweb system method:
From the bottom (gray part) and from top to bottom, insert the toe cap directly into the two shoe holes at the bottom. One end (yellow end) of the shoelace goes out obliquely from bottom to top and directly enters another shoe hole in the second horizontal row. The other end (blue end) of the shoelace obliquely passes through the third row of shoe holes from bottom to top and goes straight into another shoe hole. Repeated manipulation, two shoes alternately lead.