Take two Chinese knots of different colors, about 80CM long, and cross them in the middle.

The lower black line is placed on the left orange line, the left orange line is placed on the lower black line, the right black line is placed on the right orange line, and then the rope head under the right color line passes through the left black line from top to bottom.

Then connect the four ropes tightly together.

Conversely, in the same way, weave the rope into China.

Press the following hand to hold China to tie the rope and enter the rope knitting.

Weave it to a suitable length, cut off the excess part on it, burn the rope end with a beater, weave a loose point at the end, then thread the China knot in turn from outside to inside, and then tie it tightly after it is used up.

Now you can finish knitting and hang the key chain.

If you want to make your own key chain by hand, you'd better prepare some tools and materials. We need a stainless steel welding wire with a diameter of 1.6mm and a length of 50cm (it can be thinner, but it is recommended not to be too thick, otherwise it will be difficult to make).

Ordinary pliers are generally available at home, and vice pliers are generally available everywhere with keys. With this, it is convenient to make a key chain.

After the tools and materials are ready, we will start making key chains. First, use pliers to fold the stainless steel welding wire in half from the middle.

Fold to both sides in the middle third.

After the last step is completed, use pliers to stagger one of them forward at the first bend and fold it straight.

Next, hold it in a vice, paying attention to the curved face down.

Then, the bent welding wire approaches the root and starts winding. One trick is to clamp the root with pliers and then wind it round and round, which is better.