Method 1: basic bow
1, find a ribbon or rope first. The knotting method of basic bow has nothing to do with the material of ribbon and the purpose of bow. You just need to find a complete ribbon. If you want to tie a bow at the top of the package, you should bypass the package from below and tie both ends of the ribbon at the top of the package to ensure that both ends are the same length. Then draw the tape left and right.
You can also not tie a bow on the package. In this way, you just need to tie a knot in the middle of the ribbon.
2. Wrap the ribbon on the left in a circle. Pinch the ribbon ring with your thumb and forefinger and fix it. If you tie a bow with a ribbon, don't turn it upside down, because the ribbon ring should be smooth and outward.
3. Make the second circle. Next, wrap the right ribbon around the left ribbon ring and pull it out to form a ring with the same size as the left ribbon. Just like you usually tie your shoelaces.
4. Tie the bow. Pull the ribbon loops on both sides to the left and right respectively, and tighten the knot in the middle. Make sure that the rings on both sides are the same size and that the ends of the ribbons are of sufficient length. In this way, a bow is finished.
Method 2: Ring bow
Find a long ribbon. This bow needs a ribbon about 12 inch long, and can't be tied.
Draw a circle at the left end of the ribbon. Draw a circle about 3 inches on the left and fix it with your thumb and forefinger.
3. Make a ring around the left ring at the right end. At this point, the ribbon looks like an inverted "S" shape. Fix these rings with one hand to prevent them from falling apart.
4. Continue to wrap the ring with ribbon. Wrap the remaining ribbon around the ring in the form of accordion, thus forming several rings with ribbons of the same length at both ends.
5. Fixed center. Tie the ring in the middle with a flower shop thread or string and divide it into two parts, so there are several rings on the left and right.
6. Loosen the ring. Separate the circle and stand up to cover the center point. Cut both ends of the ribbon into an inverted "V" shape with scissors, which looks more professional.
Method 3: flower bow
1. Wrap the ribbon around your hand. Hold one end of the ribbon with your hand and wrap the whole ribbon around your palm. Each lap should be wound neatly and evenly on the previous lap.
2. Take the ribbon ring from your hand and fold it in half. Never break the ribbon ring when you take it off.
3. Hold the folded ribbon ring with one hand, and cut a small corner on both sides with scissors with the other hand. Make sure that each layer of ribbon is cut.
Don't put the two corners too close to the center of the ribbon.
4. Fix it with another belt. Tie a knot in the gap with two ribbons. You can also use flower shop thread or thin thread.
5. Expand the circle. Separate the rings one by one from the inside out, gently pull the rings outward and arrange them in the shape of petals. In this way, the pattern bow is completed.
6. done.
Tip Make sure that both sides of the tape are the same length.