After buying a house, if the decoration is not good, then a good house will really be wasted, and the decoration of the house is also very confusing for many people. In general, people may choose to stick boards to decorate the walls. There are many ways to decorate. After buying a house, if it is not properly decorated, then a good house will really be wasted. The decoration of the house also confuses many people. In general, people may choose to stick boards to decorate the walls. There are many ways to decorate, so it is not recommended to stick a blackboard on the wall at home. What are the precautions for pasting plates on wall decoration? Look at the introduction below.

Blackboard wall stickers are not recommended at home.

Don't put the blackboard wall in the children's bedroom. Children don't need to clean the blackboard every day. Parents should remind their children not to put chalk in their mouths before teaching them to draw. There are advantages and disadvantages of blackboard wall stickers. The advantages are that it will not be outdated, the price will not be expensive, parents will participate, and children will not doodle at home. The disadvantage is that there is a lot of dust in the air and the workload of parents is heavy, but you can use dust-free chalk or liquid chalk without worrying about chalk dust. Generally speaking, smooth walls and wooden furniture surfaces can be painted with blackboard paint, and oily blackboard paint is not recommended because of its strong smell and environmental protection. Water-based blackboard paint is generally used now.

What are the precautions for wall decoration stickers?

1. Positioning arching: Before installing the wooden partition, the elevation, plane position and vertical dimension should be found in advance according to the requirements of the design atlas, and arching should be carried out.

2. Check the embedded parts and holes: check whether the embedded parts, wooden bricks or wooden wedges meet the design requirements, and whether the arrangement spacing size and position meet the requirements of nail keel. Measure whether the position and size of doors, windows and holes are vertical and meet the design requirements.

3. Laying and coating moisture-proof layer: When the design requires moisture-proof, the wooden retaining wall and wooden keel must be installed square and straight. The gap between the skeleton and wooden bricks should be padded with wooden mats, and each wooden brick should be nailed with at least two nails. When nailing the keel, the thickness of the plate should be reserved. The contact surface between the wooden keel and the wall should be treated with anti-corrosion, and the other three surfaces should be treated with fire retardant coating for not less than three times.

4. Installation of lining board: After the keel is installed, the joinery board with the thickness of 15mm is installed as the lining board, which is qualified. It is required to nail the lining board firmly, control the fixed spacing of nails at about 200mm, and brush the back with fireproof paint. There should be a telescopic gap of about 5mm between splicing plates to ensure thermal expansion and cold contraction when the temperature changes.

Blackboard wall stickers are not recommended at home. What are the precautions for decorating iron plates on the wall? The above introduction has been very detailed. Good decoration can make the owner have a better occupancy experience, but it is best to choose the appropriate decoration method according to the actual needs of the owner and the overall economic situation.