A tutorial on making plastic photo frames
Materials for making plastic photo frames: discarded DVD plastic boxes (any plastic box can be used), lace materials (available on the market or online), cotton and linen fabrics (colors can be selected according to your preference), trinkets and handmade glue.
Manufacturing method of plastic photo frame: clean the DVD plastic box, leaving only the plastic box, and throw away all the cores and paper inside; Then cut the cotton linen into pieces the size of a plastic box, and stick it in the plastic box for decoration with manual glue (if you use an ordinary plastic box, you can cut it into two pieces of plastic with the same size with scissors, cut the linen according to the size, sandwich it between the plastic pieces and fix it with glue. )
Next, stick a circle of lace around the plastic box with glue, and then stick small ornaments around it. You can post the photos on the photo frame in the future. Rabbit reminds us that we can give full play to our imagination in life and make our own creative plastic photo frames with various materials.
Will the DVD plastic boxes piled in the corner of the house be reduced to garbage and will soon be swept out of the house? Today, Bian Xiao teaches you how to turn a DVD plastic box into a photo frame, adding a layer of protection for the years and keeping your wonderful time! Even if photos are not put in the reconstructed photo frame, cloth with beautiful patterns can also be used as decorative ornaments. Skillful MM, do it!
Second, the material preparation:
DVD plastic box lace cotton and linen trinkets handmade glue
Third, the transformation steps:
1. Clean the plastic box of DVD, that is, take out the core in the middle and the paper stuck in the middle.
2. Choose a piece of cloth you like and cut it according to the size of the DVD plastic box.
3. Stick the prepared lace around the DVD plastic box.
4, add your favorite bow, wool hook lantern decorations, and you're done!
Many home stores have a kind of plum blossom nail, which is specially used to hang pictures and photo frames. On the load-bearing wall, find a good position, mark it, and then knock the plum blossom nail in with a hammer, so it can be easily nailed in. There is a small hook for hanging pictures on the back of the nail, which is very convenient and the tension is good. There are different types of nails, which can be selected according to the size of the picture frame.
As for the light wall, it is not recommended to nail cement board and gypsum board to avoid falling off the frame. If you want to hang a large oil painting on the lightweight wall, you need to design it in advance and reinforce the lightweight wall during decoration. Hanging heavy paintings on lightweight walls needs to be fixed with steel belts reinforced with perforated screws. Hanging wooden couplets or heavy plaques requires embedding mirror lines in the wall in advance to ensure load bearing, or lining the wall with large core boards.
How's it going? After reading the introduction of plastic photo frames above, do you know a lot about plastic photo frames? I hope you can learn more about home improvement through this article, so as to create a more perfect home environment. Thank you for reading this article, and for your strong support and love for Bian Xiao. Want to get more information about home improvement, please continue to pay attention.