Required materials: used red envelopes, scissors, stapler, double-sided tape, red rope, self-woven tassels or Chinese knots.

Specific steps:

1, the red envelope is half as shown in the figure, and the one that needs to be folded 12 for standby.

2. Divide the folded envelopes into four groups, seal the envelopes in each group at the blue point in Figure 2 and connect them with a stapler. The shape of each group of sealing envelopes is shown in Figure ③, and two groups (one for the bottom of the lantern and the other for the upper cover of the lantern) need to be spliced.

3. In the end, four interest seals are useless. We made a rectangular peripheral splicing along the bottom of the welfare seal. As shown in Figure 4, the benefit seal of the blessing character is blue and the connection point is blue.

4. After the periphery is connected with the bottom, the other side of the periphery is connected with the upper cover in the same way, and the lantern is basically formed. The final effect is shown in Figure 5. The last corner is difficult to nail, so you can stick it with double-sided tape, as shown in Figure 6.

5. It is best to put a needle on the top and bottom of the seal, cross the red rope, and hang tassels or Chinese knots.