Current location - Training Enrollment Network - Books and materials - How to make clip-and-paste scrolling subtitles (mobile phone subtitle scrolling setup tutorial)
How to make clip-and-paste scrolling subtitles (mobile phone subtitle scrolling setup tutorial)
In the next few videos, we will share several methods of making music video rolling subtitles.

It has 1000 more eyes than a hand.

As long as you follow Xiaohua's video operation step by step, I believe you will learn.

Ok, let's click cut, click start creation,

Click on the material library, add a black floor, and click on the proportion. 9 : 16。 Click back.

Click the text. New text.

I have copied it. Long press the input box.

Click Paste. Click the style. Arrange. Adjust the font size to 12. Adjust the line spacing to 13. Click the check mark.

Now I want to take a screenshot, but there is a zero in the middle of the screen. How to get rid of this zero?

All you have to do is enlarge or reduce the text with your two fingers. This zero has been deleted.

Ok, now let's click on the screenshot on the phone. Intercept the required part. Click Save.

The bottom text is ready.

Let's click the fork in the upper left corner, exit, and click Start Creation again.

Add video.

Click Audio, click Music. Add a song.

The prelude to this song is 18 seconds.

I moved the hour hand to the position of 12 second. Delete the front part.

A prelude of about 20 seconds, if your video is not very exciting, it is difficult to retain the audience.

Then move the audio to the front and align it with the front.

This song has two paragraphs, so I will only show you how to write the first paragraph.

The second paragraph is done in exactly the same way.

Come to the end of the first song. Delete the second paragraph of this song.

Click back.

Click on the text, and click to identify the lyrics. Start identifying. After the lyrics are determined.

Move the clock to the first song.

Press and hold the box in the lower right corner of the subtitle.

Adjust the size of subtitles. Move the text to the appropriate position with one finger.

Then click the pen in the upper right corner.

Click Animation. Admission animation. Karaoke. Fill the time.

The default color is blue. I want to change it to a different color.

Move the screen up. You can choose the right color here.

Click the check mark.

The hour hand moves to the second lyric again. Light up this lyric.

Click the style below.

Click Animation. Admission animation. Karaoke. Time is full.

Choose the same color as the first sentence. Click the check mark.

Text animation is set once every sentence, so I won't operate it one by one here.

When everything is ready.

Let's light up the first sentence and click Copy.

Move the copied part before the first sentence. Align the prelude above.

Click Back, click Picture in Picture, and then add Picture in Picture.

Click on the photo. Plus the black subtitles we made.

What I want is two lines of lyrics below this karaoke sentence.

Don, don't play other lyrics. Cover it all.

Then, expose one part and cover the other part. This is the mask function we introduced earlier.

Ok, let's lengthen this subtitle to the same length as the main video above.

Now that we know how to use the mask function, who does this mask function work on?

Is it acting on the main video?

Or is it valid for black subtitles?

Still need picture-in-picture? What about the new picture in picture?

Let's make a comparison.

After reading the comparison below, everyone will be clear.

We click back.

Let's start with a picture in picture. Add a white floor to the material library for demonstration.

Now, this white backplane covers the main video and the black subtitles below.

You can't see the black subtitles below unless you take a piece from the middle of the white bottom plate.

We click on the mask. Let's click the rectangle first.

You can see it now. The rectangular mask hides what I want to see. Click Reverse.

Well, that's what we want. I just want to show two lines.

We can adjust the length and width of the rectangle. Move up and down with one finger. Adjust the position.

We can also click on the mirror image here. The effect is similar.

Here you can clearly see that there are black subtitles and main video on a white background.

Click the check mark.

Now I have lit up the black subtitles.

You can move the sentence you want out by moving up and down.

This is the effect we want.

Some friends may ask: Can you use the mask function directly on the black subtitles?

All right. Let's try it together.

Let the white backplane light up again, and then click Delete.

Light up the black subtitles. Click the mask. Click the mirror.

Because the default position of the yellow line is in the middle of this picture.

These two yellow lines are located at the bottom of the preview area.

Now I'm promoted. Adjust the distance between the two yellow lines.

Click the check mark. Now I move the black subtitles up and down.

As you can see, you can only move these three lines. It's all fixed.

Other subtitles may not move out.

Obviously. The shielding function works on black subtitles, but it can't achieve the expected effect.

Let's click the mask again.

Click this None. Take off the mask.

Click the check mark again.

Next. We are lighting up the main track video. Click Copy.

Illuminate the front part. Click to cut the picture-in-picture.

All right. The main video cuts to picture-in-picture II.

What he wants to do is what the White House just did.

We will move picture-in-picture 2 down. You can see clearly.

Here is the main video with black subtitles.

Click the mask. Click the mirror. Move to the appropriate position. Click reverse,

Adjust the distance between the two yellow lines.

I only keep the width of two lines of subtitles.

Then move the mask to the bottom of karaoke lyrics. Click the check mark.

Light up the black subtitles. Move the black subtitles to the bottom of karaoke lyrics.

Click Mixed Mode again. Click Filter Color. Remove the black bottom plate. Click the check mark.

The lyrics of the prelude should be in a waiting state. It should not be an animation of karaoke color gradient.

Then we lit it. Light this sentence. Click the style. Click Animation.

In the entrance animation. Click none. Click the check mark again. The animation will be deleted.

Let's click on the new text again. Click the number. Click on four decimal points.

Move to the top of the first lyric.

Click the style again, and then click the stroke. Choose a brighter color. Adjust its thickness. Click the check mark.

Align with the top.

Click the style again. Click Animation. Appearance animation. Erase left.

Time to three seconds. Click the check mark.

Let's set the scrolling effect of black subtitles.

Stop at the end of the first sentence.

Click back. Click picture in picture. Light up the black subtitles.

Type the first key frame here.

The function of the first key frame is that from this point in time, the black subtitles begin to move up.

Move the time hand back a little, where the next lyric begins.

Let's play black subtitles. Move up one level.

Ok, here the second key frame symbol is automatically generated.

At the end of every lyric. It's all set like this.

After the previous sentence was sung. Stop. Type the first key frame.

The hour hand moved back a little. It refers to moving subtitles up one level.

Here, the second key frame symbol is automatically generated.

Every sentence is operated like this.

I won. Don't demonstrate here.

But sometimes,

This will happen: the text bar shows one line, but on the screen, there are two sentences in the lyrics.

We will move the time pointer to the middle of this article. Put a key frame symbol on it,

The hour hand moved back a little.

Move the subtitle up one line.

Although there is no gap here, we should operate as if there is a gap.

So everyone must be careful in the process of editing.

All right. After all the operations are completed,

Let these two sentences be further apart, and let the former one be longer than the latter one. The song is still there, but the words are gone.

Click on the blank space.

Click Back, click Picture in Picture, and then add Picture in Picture.

In the material library, we search the progress bar. Add one.

Indent the black part in front of him and delete it.

Click the chroma matting.

Put the color box on the green floor. Adjust the intensity and shadow. Click the check mark.

I found that the progress bar was not long enough after the video.

In the toolbar below, we find variable speed and conventional variable speed.

Let's adjust it to 0.7. Click the check mark.

Put the extra part in. Click Split to delete.

Light the progress bar. Adjust its size and position.

Click the blank space, and then click Back.

New text. Enter the name of the song.

Put it in the right place. Click the check mark.

Click Back, and then click New Text. Enter the singer's name.

Resize it, put it in the correct position, and then click the check mark.

Pull to the length of the main video above.

Ok, let's look at the overall effect.

Ok, that's enough for today's video.

If you like Xiaohua video,

Remember to log in to the watermelon video, long press like, and send a free strong recommendation to Xiaohua.

Thank you for watching. See you next time.

Learn to edit videos. Post a 16: 9 horizontal video in the headline or watermelon for more than a minute. As long as there is a broadcast volume, there is a profit. It's not too late to start studying.

Heart of the King 2 Click on the demo.