Question 1: calculation method of sheets 16 10.5 calculation method of sheets (1): the number of faces divided by the number of sheets; (2) The concept of total pages, such as preface, table of contents, index, appendix, postscript, etc., is the same as the text. If it can be printed with the text, it should be included in the total pages; (3) If there are decimals when calculating the number of printed sheets, and the number of printed sheets is relatively small (for example, when there are only 1,000 sheets), it is generally necessary to carry forward the zero pages with less than one printed sheet according to the principle of even number (accounting for four page numbers), so as to facilitate printing and binding. 16 to 0.25, 0.5, 0.75; March 32 to 0. 125, 0.25, 0.375, 0.5, 0.625, etc. However, when the printing quantity is so large that the cost of paper accounts for about 50% of the cost of books and periodicals, this method should not be adopted, because the printing and binding costs that can be expected to be saved at this time are not enough to make up for the increase of paper cost. Example: 1: No pages: 32 pages, 8.5 pages, 32 books, 1 page, 1 page with title, 2 prefaces, 6 pages of contents, 380 pages of text, 1 page postscript (white on the back). If the title page of the book is the same as the title page in the text, the print run is = (2+2+2+12+380+2)/32 =12.5 Example 2: 32 The print run of a 32-page book is 7,000 copies, and there are two prefaces in a single book, with/kl in the catalog. Calculated number of sheets =(2+ 10+292+6)/32=9.6875 Set the number of sheets for the convenience of binding. 9.75 cases 3: 16 calculation of the number of zero pages. Opened a book with a print run of 16, with a print run of 6000 copies and a single preface of 1. If the print run of this book is increased to 12000, what is the appropriate print run of each book? When the calculated number of sheets = (2+6+196+2)/16 =12.875 is 6000 sheets, it can be set to 13 sheets for the convenience of binding.

Question 2: How to calculate the number of printed covers? The calculation of opening and consumption of paperback cover paper is different from that of body paper, and the opening number of book cover is different from that of body paper, that is, paper with the same specification cannot be used on the cover with the same opening number. Because the cover covers the book, the area must be larger than the corresponding body paper. Most paperbacks use offset paper, because offset paper is tough and durable, which can meet all kinds of printing requirements. Book cover paper is widely used to publish pamphlets, while coated paper is used to pursue gorgeous and beautiful books and publications. The basis weight of the cover paper should be proportional to the thickness of the book, and the basis weight of the thicker cover paper should be larger. Take a 32 format as an example. If there are less than 3 general characters, the cover can be 80g/m2 paper. 3-5 sheets, the cover can be 90g/m2 paper; 5- 10 sheets, and the cover should be 120g/m2 paper; If it exceeds 10, the cover should be 150g/m2. When cutting cover paper, how to cut it depends on the size and pages of books and periodicals. For books and periodicals with few page numbers, under normal circumstances, the format of cover paper can be twice as large as that of books. For books and periodicals with more page numbers, because the spine occupies a certain thickness, the size of the cover should be increased accordingly.

Question 3: How to calculate the number of printed webs? According to the printing length, most printing machines have counters. What brand of printing machine do you use? We use Changhong printing machine!

Question 4: How to get the number of sheets? How to calculate it? Please answer him quickly. This 900 is calculated according to 225*4 (quarto paper written in front), but it is generally calculated according to folio.

Question 5: If the number of printed papers is calculated, how to calculate the number of added papers when printing?

(1) Defines the customer order number of the product as the number of sheets.

For example, if you order 16 color coated paper to print 1000 sheets, you need to add 300 sheets. (2) The number of times the product is printed by a printing machine is defined as the number of times of printing. For all products printed in single, the number of copies and the number of prints are the same, and the number of copies printed in multiple is a multiple of the number of prints. (3) Assuming that a single product is printed by a printing machine, under what conditions will the number of additional sheets be 60? According to the calculation formula of the number of sheets added, we can get (number of printed sheets × number of sheets )× addition rate. If the addition rate is 0.9% specified in Tables 3 and 4, the number of prints × 0.9% = 60, and the number of prints = 60/0.9% = 6667. Therefore, when the printing number is exactly 60 and 6667 is the printing number, the following conclusions can be drawn: ① When the printing number is less than or equal to 6667, each color is 60. (2) When the print run is greater than 6667, the print run can be directly multiplied by the copy rate. (4) The number of copies is the number of copies printed when a single copy is printed. According to the two conclusions in article (3), the calculation method of the number of copies can be determined. If it is multi-link printing, it is also very simple. Just divide the number of albums by the number of links, then compare it with 666, and then determine the calculation method according to the conclusion in article (3). (5) In actual operation, the unit of measurement of 60 sheets does not necessarily refer to undivided original paper, but refers to the paper size actually used in printing by the printing machine, such as six sheets, four sheets, three sheets, folio sheets, full sheets, etc. , the corresponding actual number of sheets should be (a pair). Six quarts: 60/(6/2) = 20 cubic meters; Four quarts: 60/(4/2) = 30 cubic meters; Third spudding: 60/(3/2) = 40 cubic meters; Folio: 60/(2/2) = 60 cubic meters; Fully open: 60/(1/2) 2120m2. (6) Two concepts need to be clarified when calculating zero copies. 1. Print sheets, that is, the number of print sheets we see on the copyright page of books, such as 1. 125, 1.25. 1.375, 1.5, 10.75, 8.75, etc., and all sheets smaller than 1 are collectively zero. Two, loading (loading) version refers to the number of printing presses have been loaded, the number of loaded zero version can only be greater than the publication. For example, 0.5, 0.25, 0. 125 and other zero plates are one plate respectively, while 0.375, 0.625 and 0.75 should be divided by 0. 125+0.25 respectively. The difference between these two concepts is also directly related to the number of prints and the number of prints (sets) in calculating the king price of printing. The following is an example of calculating the amount of offset printing paper.

(1) cover, octavo, 4 colors, 50,000 copies, 4 copies at startup. Then 50 thousand/4; 1.25 million, more than 6667, added normally, 1.2500× 4 (color )× 0.9% = 450 m3. (2) Advertisement,12,4 colors, print run15,000,4 starts triple printing. Then1.50,000/3 = 0.50,000, which is less than 6667, and it is calculated as 60 sheets, and 60/(4/2) × 4 colors = 1.20 square. (3) A book has a print run of 0.875, a print run of10.6 million, and double-sided printing. Divide 0.875 into 0.5, 0.25, 0. 125, and calculate 16000×0.5=8000, which is greater than 6667, and use 8000× 0.9 %× 2 faces = 144 square,/kloc respectively.

Question 6: How to calculate the number of attachments of accounting vouchers? Generally, companies have reimbursement forms or payment forms, and the number of invoices attached to these documents should also be clearly stated, so generally, the attachment reflected in the previous accounting vouchers is only one reimbursement form+bank documents. For vouchers with invoices and income bills behind them, the attachments are counted as two.

Fill in as many master vouchers as possible, and the ticket attached to the reimbursement form is an attachment to the reimbursement form, not a bookkeeping voucher.

Question 7: How to calculate the price of printing paper? For example, the first step of printing: learn to calculate the price of paper first.

The usual formula for calculating paper price is: length × width × gram × ton price × printing number × folio number+10% loss = total paper price.

For example, printing 5,000 sheets 16 sheets, using paper157g, and the paper price per ton is 7,300 yuan = paper price is 4 18. 19 yuan,

1. Long and wide printing-line-industry refers to the size of a large paper, which is divided into two common specifications: large paper is usually called a3, a4 and a5 paper, that is, large 8-open, large 16-open and large 32-open, and normal paper is usually called b3, b4 and b5 paper, that is, positive 8-open and positive 62-open. This is just an open piece of paper, divided into several parts.

2. Gram number refers to 1 m width × 1 m length, and the weighed weight is called gram number, also called weight.

3. Ton price refers to the price of 1 ton of paper, 1 ton (t)= 1000 kg (kg), 1 kg = 1000 g (g),

4. Print quantity, also called print sheet, refers to the quantity you need to print.

5. The number of sheets, also called specifications, refers to how many sheets are opened on a large piece of paper (also called the whole piece of paper).

6. Loss, also known as paper supplement, refers to the increased quantity in the printing process, which causes loss in the printing process, otherwise the delivery quantity cannot be guaranteed.

Step 2: Learn to calculate the start-up fee.

The calculation formula is simple, just remember the following startup costs.

Full-open offset press: the starting printing fee for a brand-new machine is 1500 yuan, less than 5 reams (Guangzhou price).

In the 1990s, the printing cost of 1200 yuan was less than 5 reams (Guangzhou price).

In the 1980s, the printing cost of 1000 yuan was less than 5 orders (Guangzhou price).

Offset press: The starting price of the new machine in 800 yuan is less than 3 orders (Guangzhou price).

In the 1990s, the printing cost in 700 yuan was less than 3 reams (Guangzhou price).

In the 1980s, the printing cost in 600 yuan was less than 3 reams (Guangzhou price).

Four-fold offset press: The printing cost of the brand-new machine in 700 yuan is less than 1 order (Guangzhou price).

In 1990s, the printing cost in 600 yuan was below 1 ream (Guangzhou price).

In the 1980s, the printing cost in 500 yuan was below 1 ream (Guangzhou price).

Six-page offset press: The starting printing fee of the brand-new machine in 500 yuan is below 1 order (Guangzhou price).

Machines from the 1990s? The printing fee of d400 yuan is lower than 1 ream (Guangzhou price).

Aircraft from the' 80 s? The printing fee of d300 yuan is lower than 1 ream (Guangzhou price).

The startup-print-print cost of the above models is not fixed. Please call the printing factory for details.

Step 3: Pricing formula according to color sequence.

Printing quantity ÷ printing quantity ÷500 sheets = order quantity × printing price × color quantity = total printing cost.

For example: 500,000 leaflets with the size of 16(2 10×285mm), 4+4, and the color price is 22 yuan. How much is the printing fee?

A set of formulas: 500,000 ÷16 ÷ 500× 22 yuan× 8 colors = 1 1000 yuan.

Solution: 500,000 is print run ÷6 sheets (specifications) ÷500 sheets (number of sheets per ream) ×22 yuan (monochrome 22 yuan) ×4+4 (meaning four colors on the front and four colors on the back).

Question 8: Calculation method of printed sheets 16 10.5 printed sheets (1) Calculation method of printed sheets: the number of faces divided by the number of sheets; (2) The concept of total pages, such as preface, table of contents, index, appendix, postscript, etc., is the same as the text. If it can be printed with the text, it should be included in the total pages; (3) If there are decimals when calculating the number of printed sheets, and the number of printed sheets is relatively small (for example, when there are only 1,000 sheets), it is generally necessary to carry forward the zero pages with less than one printed sheet according to the principle of even number (accounting for four page numbers), so as to facilitate printing and binding. 16 to 0.25, 0.5, 0.75; March 32 to 0. 125, 0.25, 0.375, 0.5, 0.625, etc. However, when the printing quantity is so large that the cost of paper accounts for about 50% of the cost of books and periodicals, this method should not be adopted, because the printing and binding costs that can be expected to be saved at this time are not enough to make up for the increase of paper cost. Example: 1: No pages: 32 pages, 8.5 pages, 32 books, 1 page, 1 page with title, 2 prefaces, 6 pages of contents, 380 pages of text, 1 page postscript (white on the back). If the title page of the book is the same as the title page in the text, the print run is = (2+2+2+12+380+2)/32 =12.5 Example 2: 32 The print run of a 32-page book is 7,000 copies, and there are two prefaces in a single book, with/kl in the catalog. Calculated number of sheets =(2+ 10+292+6)/32=9.6875 Set the number of sheets for the convenience of binding. 9.75 cases 3: 16 calculation of the number of zero pages. Opened a book with a print run of 16, with a print run of 6000 copies and a single preface of 1. If the print run of this book is increased to 12000, what is the appropriate print run of each book? When the calculated number of sheets = (2+6+196+2)/16 =12.875 is 6000 sheets, it can be set to 13 sheets for the convenience of binding.

Question 9: How to check the number of printed sheets In Windows Vista operating system, click Start () → Control Panel, and in the control panel window, click Printer Options. In the Printers and Faxes window, right-click the printer model icon and select the Printing Preferences menu item. In the Printing Preferences window, click the Services tab.

In the service window, select the consumable status page option from the print information page drop-down list, and then click the print button. Check the number of printed pages and estimated remaining pages of the toner cartridge.

Question 10: How to calculate the number of printed covers? The calculation of opening and consumption of paperback cover paper is different from that of body paper, and the opening number of book cover is different from that of body paper, that is, paper with the same specification cannot be used on the cover with the same opening number. Because the cover covers the book, the area must be larger than the corresponding body paper. Most paperbacks use offset paper, because offset paper is tough and durable, which can meet all kinds of printing requirements. Book cover paper is widely used to publish pamphlets, while coated paper is used to pursue gorgeous and beautiful books and publications. The basis weight of the cover paper should be proportional to the thickness of the book, and the basis weight of the thicker cover paper should be larger. Take a 32 format as an example. If there are less than 3 general characters, the cover can be 80g/m2 paper. 3-5 sheets, the cover can be 90g/m2 paper; 5- 10 sheets, and the cover should be 120g/m2 paper; If it exceeds 10, the cover should be 150g/m2. When cutting cover paper, how to cut it depends on the size and pages of books and periodicals. For books and periodicals with few page numbers, under normal circumstances, the format of cover paper can be twice as large as that of books. For books and periodicals with more page numbers, because the spine occupies a certain thickness, the size of the cover should be increased accordingly.