In the first step, you need to find the technical information of the Nimitz. It doesn't need to be particularly detailed, but the size and height of each deck and the size of important systems (such as radar) are professional and difficult to find on the Internet. I suggest going to the library to find books related to Nimitz. The first step is the most difficult. If there are no conditions (not every library has such books), you can make a rough estimate yourself. Check the area of the hangar and flight deck, and other estimates will do.
The second step is to make the hull, if you try to be realistic and the model you want to make is very large. First make a bottom, and then build it layer by layer. After the completion of the hull, the hangar and flight deck should be built: first, make a matrix according to the manufacturing method of the hull, and then install equipment such as sea sparrows.
Finally, you can buy filling paint and spray color.
1, the first thing to prepare. Paper, pen, ruler, double-sided tape.
2. Draw a shape with a pencil first.
3, add decoration.
4. Cut carefully with scissors. Fold the dotted line you just drew.
5. Below is the bottom.
6. cut it off.
7. Fold it. Because the front deck is very narrow. So fold it up. Then stick double-sided tape or glue stick on the upper edge.
8. Put it on. Pay attention to posting when posting.