Structure principle of chain plate conveyor

The chain plate conveyor consists of five parts: head driving device, tail wheel device, tensioning device, chain plate and frame.

1, chain conveyor head drive device

It consists of a motor, a reducer, a transmission device and a driving sprocket device. Power is transmitted to the spindle by the driving device through a pair of sleeve roller chain wheels, and then driven.

Trough plate operation. In order to meet the needs of different conveying speeds, the running speed of the grooved plate can be changed by changing the tooth ratio of the transmission sprocket. The driving sprocket device adopts

Two 6-tooth sprockets drive two thin-plate traction chains and grooved plates to run along the guide rail.

? 2. Tail wheel device of chain conveyor

The change direction part of the chain plate of the chain plate conveyor consists of a tail wheel shaft, two tail wheels and bearings.

? 3. Tension device of chain conveyor

The tensioning device adopts spiral tensioning mode to adjust the tightness of the traction chain.

4. Chain plate parts of chain plate conveyor

The chain plate part of the chain plate conveyor consists of a traction chain and a grooved plate. The traction chain adopts a chip-type traction chain with impact resistance and stable and reliable operation, and rollers are installed in the middle of the inner chain pieces to roll on the track to reduce friction resistance and wear. The trough plate is fastened with the traction chain by bolts.

? 5, chain conveyor frame

The frame of chain conveyor consists of head frame, tail frame and intermediate frame. It is formed by welding channel steel, angle steel and reinforced steel plate. There are four tracks for rollers to run in the middle of the frame, which are made of light rail.

You can refer to:/productlist/lbsj-1.html.