Children's tables and chairs standards Children's tables and chairs have national standards, the standard number is GB 28007-20 1 1, and the Chinese standard name is General Technical Requirements for Children's Furniture.
In the standard GB 28007-20 1 1, it is clearly pointed out that children's furniture is a furniture product designed or intended for children aged 3- 14. The product appearance shall meet the requirements in the following table:
We found in the furniture market and online e-commerce platform that children in the market pay more attention to functionality and practicality, such as high tables with double bookshelves and myopia-proof tables and chairs with lifting function.
Although these products meet the needs of children, they also bring new security risks. One of the most dangerous is tipping.
The "safety hazard" of children's desks and chairs When using a multi-layer watch, users often don't pay attention to whether the weight of the items placed on the high watch is even. If a large number of heavy objects are placed on one side of a high-rise building, it is easy to cause the product's center of gravity to be unstable and fall over. Danger.
According to GB 28007-20 1 1 General Technical Requirements for Children's Furniture, all high table and cabinet products with a height greater than 600mm should be provided with connectors to fix the products on the building, and the installation and use methods should be clearly stated in the instruction manual.
Because it is used by children, in order to prevent bumping, the edge and tip of the product are also specified.
Products should not have dangerous sharp edges and dangerous sharp corners. Corners and edges should be rounded or chamfered. The dangerous outer corner (circle 1 in Figure 65438) at the height of 1600mm below the ground shall be rounded, and the radius of fillet shall not be less than 10mm, or the arc length of fillet shall not be less than15 mm. ..
In addition, the standard also stipulates the outstanding point of the product: the product should not have dangerous protrusions. If there are dangerous protrusions, appropriate methods should be adopted to protect them. For example, bending the end or adding a protective cap or cover to effectively increase the area that may contact the skin. During the tensile test of protective parts, the protective cap or cover shall not fall off.
To sum up, parents can observe carefully when purchasing. If you encounter a defective product, please call the hotline 123 15 to report the complaint!