The wall-mounted bookshelf is the gospel of small-sized home owners who love books, and it solves the problem of books collection well. It's a little similar to our store's merchandise display shelves and library bookshelves, and it doesn't need rated materials. All the fixtures are fixed on the wall, similar to a "ladder". The distance between shelves can be adjusted by moving the partition.

1, installation tool preparation

Wall-mounted bookshelves are widely used in small-sized families, so what are its equipment and things? The hanging length of wall-mounted metal fixing equipment is based on the standard requirements of your room and bookshelf. Matching metal cantilever bracket, width 30-40CM. Laminates, blockboards, density boards and composite boards cut according to the width of bookshelves can all be 1CM thick with wood grain veneer. Some metal screws. Cement nail. Things: level, nail gun, electric screwdriver, drill, ruler. Empty the surrounding environment where equipment bookshelves are needed, and keep the walls flat. Measure the distance with a ruler and mark the direction in which the equipment hangs the metal fittings. It is best not to cross 150cm to prevent the center from falling and twisting. Fix the cement nail on the wall with a nail gun, install metal fittings, keep it straight with a level, and fix the other end.

2. Install other accessories

After we have completed the second process, we can fix other metal fittings to the wall in turn, paying attention to the level and span. When the metal fittings of the bookshelf are connected, the equipment is cantilever supported, with the same degree of attention and firmness. Then you can place laminates and books.

3. Install a baffle around the bookshelf.

We should also consider the position of books in the equipment. When we put books, we usually put them vertically, so that we can put some baffles at one end of the bookshelf without fixing them, which is similar to a single board in a library, so that we can better organize books.