Current location - Training Enrollment Network - Books and materials - How to fold a folding table How to choose a folding table?
How to fold a folding table How to choose a folding table?
Nowadays, furniture is not only very intelligent and automatic, but also more and more furniture is very space-saving and easy to carry. Just like folding a table, it saves space very much. But readers, are you familiar with folding tables? In fact, folding tables are often touched in daily life. In fact, knowing more about folding tables is very helpful to our life. Let's get to know each other. So, how to fold the folding table?

How to fold the folding table?

1. Preparation before assembly: Preparation tool: cross or flat screwdriver; No wrench; It is recommended to use pencils and electric drills. Insert the circular fixing head into the punching hole (the cross side of the connector is exposed, and the notch of the fixing head is aligned with the position of the punching hole in the cross section).

2. Screw the connecting rod into the expansion plug embedded in the plate (it is best not to screw it to the end). Install the universal wheel to the number. Movable doors marked with numbers on the drawings. 14 wrench, you don't need to screw it to the end first, and then adjust the height later.

3. Screw the handle into the perforated handle hole (pay attention to the front and back of the door panel, and the side without hinge hole is the front). The handle screw may be too long, so two circular washers with holes in the middle are added to the hardware package, and the washers are placed between the screw and the door panel.

4. When leaving the factory, only the hinge screw holes are pre-drilled on the movable door and door panel, and the hinge holes on the two side panels and the top panel are not pre-drilled, which makes it easier for the buyer to install, and the error is small, which only makes the buyer lose money by screwing a few more screws. The screws used to fix the hinge are self-tapping screws, which can be easily screwed in with a screwdriver even without pre-drilling.

5. Turn the folding table upside down, with the top plate touching the ground, and connect the No.2 desktop with the 1 top plate with hinges. Move the door panel to support the desktop, insert the bolt head into the hole on the back of the desktop, draw the position on the movable door with a pencil and fix the bolt (the bolt hole is not drilled in advance).

6. When assembling the folding table, you should spread felt cloth or cardboard boxes on the ground to avoid scratching the table. When assembling the hinge, it is difficult to screw in the screws because the surface of the plate is hard. First, you can hold down the screw, knock it a few times with a hammer, and leave a small hole in the board, so it is easy to screw it in. A table needs 24 sets of fixed heads and connecting rods, 26 sets are put in the package and 2 sets are left. Please don't say there are missing parts.

Selection method of folding table

1. When buying this kind of table, pay attention to whether the welding place is smooth and seamless. Pay attention to whether the coating is uniform and soft and whether the performance of the spring is good. It depends on whether the bayonet is firm and whether the chute has astringency. Look at the overall quality of the frame, shake the whole folding table with both hands, and firmly indicate that the frame is good.

2. Finally, open and close the table once, and change every angle to see if the comfort is good. In addition, the folded part should be easy to open and close, not too tight or too loose, just right. Consider the size of the space. Choose folding tables of different sizes according to the space size.

3. Consider the location of the folding table. The folding table is very light and flexible, designed against the wall, and designed to spread out in the middle of the restaurant like an ordinary dining table. How to choose can depend on personal preference and space size.

Through the above detailed introduction, I believe everyone is familiar with the folding method of the folding table. We know some information about folding tables. When buying a folding table, you must buy it in several stores, so that it is easy to choose a table with good quality and low price. Take care of the folding table at ordinary times. After reading the article, you have a deep understanding of how to fold the folding table. Interested readers can rest assured to buy.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp; Wb, you can get it for free ~