According to the need, the power, resistance and surface temperature of the conductive paper heater can be designed and adjusted at will. Uniform heating, high electrothermal conversion efficiency, up to more than 99%, fast heating speed, one minute heating, five minutes to reach the set temperature. Compared with any heating medium on the market, the same effect can save energy by about 50-70%.
Carbon fiber electric heating plate is a kind of nonmetallic carbon fiber heating material, which is sealed and compounded with high-strength insulating material at high temperature and high pressure.
Parameters:
Surface temperature: ≤ 120℃
Working speed: 0.01w/cm2-0.4w/cm2.
Withstand voltage: ≥ 3750 v.
Thickness: 0.3mm-1 mm.
Gauge: 980mm× 1980mm.
Waterproof grade: above IP6.
Flame retardant grade: UL94V0.
Service life: over 30,000 hours.
Features:
1, high efficiency and energy saving
Carbon fiber electric heating plate is made of nonmetallic carbon material, which directly converts electric energy into heat energy when it is electrified and heated, and does not produce light energy and mechanical energy, and has no heat loss itself. Tested by the National Center for Quality Supervision and Testing of Infrared and Industrial Electrothermal Products, the electrothermal conversion efficiency is as high as 99% or more. Its biggest feature is that it is transmitted in the best radiant heat mode, and the electrothermal radiation conversion efficiency is over 60%. It is plane heating, and the heating speed is fast and uniform, and 65438+ is electrified. Compared with traditional conduction heat and convection heat, this product can save energy by more than 30%. [ 1]
Energy saving principle
① Regional heat
Electric heating plate is a plane heat dissipation, and its conductive heating body is like a three-dimensional network. The plane resistance composed of locally disordered and overall ordered short carbon fibers is both a heating surface and a heat dissipation surface. The heat transfer area is increased by 99% compared with the resistance wire, and the heat dissipation area is more than 50 times that of the resistance wire.
② electron impact heating
The thermal element reacts under electric excitation, electrons move at high speed in the thermal element and generate Brownian motion on the electric heating plate on the surface of irregular conductor, and the collision friction between electrons generates heat and penetrates the medium; The whole heating process is silent, dull and pollution-free, and it is a veritable green product.
2, safe and reliable, and long service life
Heating element is a new type of nonmetallic carbon fiber heating material, which is compounded with high-strength insulating material by high-temperature and high-pressure sealing. Long-term operation does not oxidize, fall off or break; It is flame retardant, corrosion resistant, waterproof and moisture-proof; Excellent impact resistance, impact resistance and good mechanical properties; The insulation strength reaches 1000V, and it can be used for more than 30,000 hours for a long time.
3. Environmental protection
The electric heating plate is a nonmetallic pure resistance heater, which has no noise, magnetic pollution, static electricity and open flame during operation. Has passed the environmental protection certification.
4. Physical therapy and environmental protection
Infrared wavelength of electric heating plate is 5~ 15? M, which is the most suitable infrared band for human body, is praised as "the light of life" by the medical community. It can activate human cells and tissues to form vibration absorption, promote human metabolism, and has obvious physical therapy effect.
Step 5 save space
The thickness of the product is 0.3~0.5mm, which can be designed at will according to the use requirements. Installation does not occupy space is its biggest feature.
Scope of application:
Room heating: residence, villa, office building, hotel apartment;
Large venues: libraries, exhibition halls, conference halls, theaters, kindergartens, entertainment venues, shopping centers, banks and hospitals;
Special heating: swimming pool, gymnasium, greenhouse, parking lot, waiting room, road and bridge tunnel, factory warehouse, airport, ground skiing, etc.
Infrared ray is the ray that can penetrate the skin and subcutaneous tissue most in all sunlight. Because the far infrared ray is close to the vibration frequency of cells and molecules in human body, the "life light source" will cause the atoms and molecules of human cells to vibrate after penetrating into the body, and absorb the thermal reaction formed by the friction between molecules through the sound of * * *, promote the temperature rise, expand the microvessels, accelerate the blood circulation, help to clear the blood vessel deposits and harmful substances in the body, and hinder the new metabolism. Therefore, far infrared rays can improve and prevent many diseases caused by blood circulation and microcirculation disorders.
The traditional method is sweating because the human body temperature rises in a high temperature environment. This traditional sauna equipment is easy to cause suffocation, the air is not circulating, the soup is easy to hurt the skin, and it is not easy to last long. Not suitable for the elderly or children. Now the latest patented technology has helped us solve this situation! As we all know, our cooking oven is based on the principle of infrared ray.
Far infrared rays have solved the above problems!
In the process of sweating at low temperature, spontaneous sweating can trigger many healthy processes. Some harmful substances in the human body, such as heavy metals in food, harmful substances such as nicotine and alcohol, lactic acid, free fatty acids, fat and subcutaneous fat, sodium ions, uric acid, cosmetic residues accumulated in capillaries, etc. It can be excreted directly from the skin and sweat through metabolism, without going through the kidney, which can avoid increasing the burden on the kidney.
Far red money lines are also different from low-frequency electromagnetic waves emitted by household appliances. Low-frequency electromagnetic waves emitted by household appliances can penetrate walls and change the characteristics of human current, so people highly doubt its harmfulness. The penetrating power of far infrared rays in human skin is only 0.0 1 ~ 0. 1cm, and the wavelength of far infrared rays emitted by human body itself is 9 micron red, which cannot be confused with low-frequency electromagnetic waves. Far infrared rays are used in the adjuvant treatment of many diseases, such as muscle soreness, tendinitis, sores, burns and diseases that are difficult to heal. Using the characteristics of far infrared rays can promote blood circulation and achieve the purpose of adjuvant therapy.