Stone care method
1. Water seepage pollution of stone external wall: wipe it with water without using other cleaning agents.
2. Prevention of water damage: Use multifunctional protective agent or special stone protective agent before construction.
3. Baihua treatment: protect the stone surface and strengthen the waterproof function of the joint filling part.
4. Treatment of rust spots: The use of powerful scavenger can effectively remove rust spots without hurting stone. It is best to do protective treatment before installation.
5. Treatment of stains: Choosing a suitable stone cleaning agent can effectively remove stains.
6. Treatment of wax scale: Using decontamination and wax removal agent can effectively remove wax scale on the surface and pores of stone without damaging the luster of stone. After wax removal, use multifunctional protective agent.
7. Treatment of yellow vomit (straw rope yellow): It is effective to prevent the recurrence of yellow vomit only by using multifunctional scavenger and protective products.
8. Wear-resistant treatment: surface treatment with stone maintenance agent and regular surface protection treatment.
Matters needing attention in stone care
1, stones are most afraid of water, which is well known. Dry grinding is mostly used in stone renovation, and dry grinding technology can no longer meet the requirements. At present, it can only be suggested that dry grinding can be used before 300# grinding, and water is still needed as grinding aid after 500# grinding, but the dosage of this water is particular. Our suggestion is water jet grinding to control the water consumption as much as possible. Paddles are enough for grinding after water spraying, but too much water will reduce the grinding efficiency. Wipe the polished paddle clean with a mop, and then spray water to polish it. Repeat this until each grade is completed. The control of water consumption is directly related to the efficiency and quality of the whole project and should be paid attention to.
2. In the use of decorative stone, including decoration and care, it is easy to ignore the waterproof problem. It is the problem of water that directly affects the use of decorative stone. Therefore, before decoration, stone should be caulked first, then waterproof, and then caulked, which is the most easily overlooked problem in the industry, and is also directly related to the quality and effect of later crystallization. Many construction teams don't pay attention to this point, and some do it after waterproofing, which is very wrong. Because waterproofing is done before jointing, there is no waterproofing at the joints. Most of the water in decoration often seeps into the cement under the stone from the joints. After the cement contains water, it slowly evaporates out of the stone surface, which leads to the salt change on the stone surface, which is called alkali returning phenomenon in the industry. Therefore, the waterproofing of stone joints is particularly important. This is a problem that deserves our attention.
3. After renovation, micropores and micro-cracks are exposed. If you want to do a good job of mirror care in the later period, how to do it orderly, effectively and in one step? All along, the industry is constantly seeking and pursuing such products in order to achieve perfect results. After decoration, the stone is pretreated and filled with organic resin powder (crystal powder), which often ignores inorganic stone. It is not suitable to use organic resin powder (crystalline powder) to fill holes, and it is also incompatible from the perspective of chemical compatibility. These solids contain organic resin powder (crystalline powder) and have no permeability at all. At most, it is covered with a film to seal the pores of the living stone that needs breathing.
Nowadays, many families like to use stone when decorating. How to care when choosing stones is also necessary. The above are the stone care methods and precautions introduced by Bian Xiao, which ends here.