A. Registration requirements for registered safety engineers

Registration requirements for registered safety engineers:

(a) to obtain a college degree in safety engineering and related majors, and to engage in safety production business for 5 years; Or have a college degree in other majors and have been engaged in safety production business for 7 years.

(two) to obtain a bachelor's degree in safety engineering and related majors, and to engage in safety production business for 3 years; Or obtain a bachelor's degree in other majors and have been engaged in safety production business for 5 years.

(3) Obtaining a second bachelor's degree in safety engineering and related majors and having been engaged in safety production business for 2 years; Or get a second bachelor's degree in other majors and have been engaged in safety production business for 3 years.

(4) Having a master's degree in safety engineering and related majors and having been engaged in safety production business for 1 year; Or obtain a master's degree in other majors and have been engaged in safety production business for 2 years.

(five) with a doctorate, engaged in safety production business for 1 year.

(six) after obtaining the professional qualification of junior registered safety engineer, he has been engaged in safety production business for 3 years.

(1) Extended reading of the course outline of registered safety engineer;

Brief introduction of certified safety engineer certificate:

Safety Engineer Qualification Examination is a qualification examination jointly held by Ministry of Human Resources and Social Security and state administration of work safety. Rolling examination (every two years is a rolling cycle), candidates who take four courses must pass all the examination subjects within any two consecutive years, and workers are exempted from passing some examination subjects within one year. The certificate is valid nationwide.

Arrange a certain number of registered safety engineers to engage in safety production management and safety engineering technology in production and business units and intermediary institutions that provide technical services for safety production. Authorized by the State Economic and Trade Commission, state administration of work safety is responsible for implementing the qualification system for registered safety engineers.

Network registered security engineer

B.20 19 examination outline for intermediate registered safety engineer? Who can provide it?

Hello! The official examination syllabus of 20 19 has not been published. At present, all the examination institutions and students are studying mainly the draft outline released in July 20 18. If you study now, you can refer to that document. Good luck!

C. There are too many safety production techniques in the registered safety engineer exam. How should I review them?

A, safety engineer examination outline deleted.

Seven test sites were added, and 1 difficulty was deleted.

1, safety laws and regulations subject

(1) The law on prevention and control of occupational diseases (part 6) has been added to the laws related to production safety.

(2) The Regulations on the Administration of Work Safety (13) added the Emergency Regulations on Work Safety Accidents.

(3) Regulations and important documents of the Ministry of Safety in Production (37) have added Coal Mine Safety Regulations, Provisions on Safety Management of Sectional Projects with Greater Danger, Criteria for Judging Potential Dangers of Major Production Safety Accidents in Related Industries and Catalogue for Eliminating Backward Safety Technologies, Processes and Equipment.

Analysis: The syllabus of the 20 19 examination on safety production laws and regulations has changed greatly, and six new provisions have been added.

2, production safety management subjects

(4) Prevention and management of new occupational hazards in safety production management.

(E) Safety production management reduces the double prevention mechanism of hierarchical control of safety risks and investigation and management of hidden dangers.

Analysis: The syllabus of the 20 19 Safety Production Management Examination has been slightly changed, and the double prevention mechanism of safety risk classification control and hidden danger investigation and management has been deleted, and the prevention and management of occupational hazards have been increased.

Second, the three biggest changes

Change 1: As can be seen from the latest new syllabus, professional practice and technology have been increased; Among them, the score of professional practice examination is 100, the score of professional technology is 20 and the score of case analysis is 80. It should be noted that the case analysis is a comprehensive case analysis.

It can be speculated that the case analysis will still be the original form of writing questions, and then it is speculated that the teaching materials are only different in professional skills, and 80% of the case analysis is the same. 20 points for professional skills is a single choice, and the examination syllabus has a lot of content. It is not difficult to speculate, but the scope is wide and the key points are difficult to grasp! This requires candidates to understand and remember the knowledge points, and never browse the memory.

Change 2: The law adds the law on prevention and control of occupational diseases, which is somewhat unexpected. 18 scored a point at the end! But occupational diseases are inevitable and part of safety management. How can you not understand the law?

Change 3: The double prevention mechanism is removed from the safety management, and the content is almost the same as that in the 1 1 version, except that it keeps pace with the times! Turn mortgage risk into insurance!

D.20 19 when will the examination outline for junior registered safety engineers be published?

The new textbook will be used in the 20 19 intermediate registered safety engineer examination, and it is expected that the textbook will be published and listed in May 20 19.

20 19 notice of safety engineer examination has not been released. According to the Regulations on the Professional Qualification System of Registered Safety Engineers and the Implementation Measures for the Professional Qualification Examination of Registered Safety Engineers issued by the Emergency Management Department in 2065438+02 and 2065438+09, registered safety engineers are clearly set to three levels: advanced, intermediate and junior, which are divided into seven professional categories such as coal mine safety.

Registration for the 20 19 Safety Engineer Examination starts in August and ends in September. To apply for safety engineer, you must first choose the local city and audit point, then choose the registration level and major, choose the examination subjects to apply for, truthfully fill in my other application information, and then enter the verification code.

E. experience sharing of registered safety engineers in preparing for exams

1. Stick to the outline and read through the textbook.

The importance and necessity of the exam outline: all the preparation planning arrangements of candidates must not be separated from the outline, which is the basis of the safety exam, and the test sites, important and difficult points in the teaching materials will be reflected in the exam;

2. Consolidate basic knowledge points, focusing on understanding &; memory

The questions of safety examination are mainly divided into multiple-choice questions and case analysis questions; It must be admitted that the design patterns of these two types of questions are relatively easy for candidates to answer. It is not surprising that many students are confident that they can get high marks and have case analysis questions when the topic information is comprehensive. After all, the design of these two types of questions determines the importance of understanding this prominent factor; But sometimes some students' memories of some test sites are not accurate, and they always have a vague impression. In fact, when it comes to specific topics, it is in a dilemma: answer A is right, answer B seems to be right, answer C is ok, and answer D seems reasonable;

The premise of understanding lies in accurate memory, test site memory and the basic knowledge points of the four courses of safety examination should be firm and accurate; For example, the pre-job safety training time of employees in a chemical enterprise should not be less than how long (answer: 72 hours). If you can't remember correctly, then the answer is impossible;

This second point is actually related to the first point. The premise of consolidating, remembering and understanding knowledge points lies in reading and understanding the outline thoroughly. Therefore, the syllabus needs candidates to read and understand repeatedly; Understanding and thorough understanding of the syllabus need to be specific to individual study habits, study methods and specific time arrangements; However, it should be emphasized here that the study of the four subjects in the security examination is not a simple and independent single subject study, but there is interoperability between them. Therefore, it is suggested that candidates should pay attention to the interoperability between knowledge points when reviewing, and they must grasp it profoundly and draw inferences from one another;

3. Breakthrough of key and difficult points

Full score of safety test 100, passing score 60; Relatively speaking, some candidates don't expect to pass the exam with high scores, while others hope to break through themselves with high scores;

The breakthrough of important and difficult points actually lies in the improvement of divergent thinking and understanding ability and the consolidation of knowledge points. Generally speaking, the way to improve divergent thinking and understanding lies in doing more, thinking more and asking more questions.

4. True question training

True topic training is divided into chapter training and real topic training over the years; Text training lies in the consolidation and strengthening of knowledge points. Chapter training helps to detect candidates' mastery of the knowledge points in each chapter of the subject, so as to check and fill in the gaps, while the real topic training over the years is aimed at candidates' detection and positioning of the overall knowledge points in each subject, which complement each other. Moreover, the training of real questions over the years can enable candidates to enter the exam in advance, be familiar with the exam and prepare for it better;

F.20 14 will there be any change in the examination outline for registered safety engineers?

Hello, let's catch the exam. According to the examination syllabus of previous years, the examination syllabus of 20 14 registered safety engineer is adjusted every three years. This can also be understood according to the batch of textbooks published in previous years. Even if it is adjusted, there will be no major changes, the basic content and framework will not change, mainly the adjustment of safety production laws and regulations, and new content will be adjusted every year.

When will the G 2065438+2009 Intermediate Certified Safety Engineer Examination Outline come out?

20 19 safety engineer examination outline has been released, and the specific contents are as follows:

Notice of the General Office of Emergency Management Department on Printing and Distributing the Outline of Occupational Qualification Examination for Intermediate Registered Safety Engineers and the Outline of Occupational Qualification Examination for Junior Registered Safety Engineers

Emergency Department No.43 [20 19]

Emergency management departments (bureaus) of all provinces, autonomous regions and municipalities directly under the Central Government, the Emergency Management Bureau of Xinjiang Production and Construction Corps, and all central enterprises:

In order to do a good job in the professional qualification examination of intermediate and junior registered safety engineers, according to the relevant requirements of the Regulations on the Professional Qualification System of Registered Safety Engineers and the Implementation Measures for the Professional Qualification Examination of Registered Safety Engineers (Emergency [2065438+09] No.8), with the consent of the Ministry of Housing and Urban-Rural Development and the Ministry of Transport, the Emergency Management Department organized and compiled the Outline of the Professional Qualification Examination for Intermediate Registered Safety Engineers and the Outline of the Professional Qualification Examination for Junior Registered Safety Engineers. The original notice of the attachment details of the vigorous education reminder.

Attachment:

1. outline of the vocational qualification examination for intermediate registered safety engineers

2 junior registered safety engineer occupation qualification examination outline

General office of emergency management department

20 19 April

H.20 17 when will the examination outline for registered safety engineer come out?

20 17 safety engineer examination outline:

1 and 20 17 safety engineer examination outlines have not been published. Candidates can refer to the content of 20 15: the content of the 20 15 safety engineer examination is implemented according to the requirements of the qualification examination outline for registered safety engineers (version 201/kloc-0).

2. For the changes of some relevant laws and regulations in recent years, the content of the examination has also changed accordingly. For details, please refer to 20 15, revision of laws and regulations related to the qualification examination for registered safety engineers and explanation of new contents.

1. When will the examination outline of 20 19 registered safety engineer come out?

20 19 safety engineer examination outline has been released, and the specific notice is as follows:

When will the examination outline of J registered safety engineer come out?

The examination syllabus is usually released together with the new textbooks.