Hot stamping technology is improved on the basis of ordinary couplets and calligraphy and painting, and the methods are as follows:

First prepare ordinary couplets, some calligraphy and painting (handwritten or mechanical), anodized and pigments.

Second, paint: paint mixing needs to be self-made, and mixed evenly with hot tung oil and yellow ready mixed paint 6: 4 (you can also paste anodized paint with big paint. After mixing, use a brush dipped in pigment and apply it to ordinary couplets and calligraphy and painting, so as to avoid painting and calligraphy drawing down one by one.

Third, after tracing for half an hour, try to wipe the surface of the paint film with your fingers, so that the paint film has a pulling feeling and does not stick to your hands. It's too wet and dry to paste anodized. When pasting anodized aluminum, the golden side is up and the white side is close to the paint film. After covering the font pattern (latex gloves are required for operation), press the anodic oxidation with your fingers to make it tight. When it is slightly dry, try to uncover it once to see if the gold powder adheres to the paint film. If it is pasted, gently peel off the adhesive film, and the golden color of anodized aluminum will be transferred to the product. If the adhesion is not good. The surface of the product is shiny and uncovered, which looks like the real thing.

Note: If some parts leak gold, it is the reason of being too thick, too full or leaking paint, but all parts are repainted and re-pasted with anodic oxidation.

As for the luminous, I think it should be possible to add some fluorescent powder to the paint.