2. After creating a blank document, select Menu View->; New reference line "to set three folded reference lines.
3. According to the triple division and the size of bleeding, we built two reference lines (0.3cm, 2 1.3cm) horizontally and four reference lines (0.3cm, 9.8cm, 19.3cm, 28.8cm) vertically, and then selected the menu "View->; Lock Guides "to lock the guides. If the guide line is not displayed, you can choose the menu View->; Show->; Reference line ".
4. Next, we lay out the background. Graphic design is varied and there is no fixed pattern. Generally, the first three pages of a 30% discount are page 4, back cover and cover from left to right, and the last three pages are page 1, page 2 and page 3 from left to right. Generally, pages 1, 2 and 3 are all about publicity, and the design is relatively simple, and the front cover and back cover are also relatively simple. You can also use front and back cover designs. In this case, you will use the fourth page of the cover design, the back cover and the cover, which will make the picture look more atmospheric. First, design the cover page, open the original image 1, drag it into the document with the mobile tool to generate the layer 1, press Ctrl+T to transform freely, and adjust the size and position appropriately.
5. Then open the original Figure 2 and drag it into the document to generate Layer 2, and adjust the size and position appropriately.
6. Copy Layer 2 to generate a copy of Layer 2, and select Edit->; Transform->; Flip horizontally ",then press Ctrl+T to transform freely and adjust the size and position appropriately.
7. Click the brush selection tool, and set the foreground color to black. The brush size is about 400, the hardness is 0 and the opacity is 50%.
8. Add layer mask to the "Layer 2 Copy" and use the Set Brush tool to transition its edges.
9. Add layer mask to Layer 2, and also use a brush to transition its edge.
10. Drag the original Figure 2 into the document to generate Layer 3, and select the menu Edit->; Transform->; Flip horizontally ",then press Ctrl+T to transform freely and adjust the size and position appropriately.
1 1. Add layer mask to the third floor and erase the unused edges, so that the layout of the background is basically completed.
12. Open the original figure 3 and drag it into the document to generate layer 4, and adjust the position appropriately.
13. Add layer mask to Layer 4 and use a brush to transition the edge.
14. Continue to open the original figure 4, drag it to the document generation layer 5, press Ctrl+T to freely transform it, and flatten it properly to form a stereoscopic visual effect.
15. Set the layer blending mode of layer 5 to "positive overlay".
16. Similarly, open the original Figure 5 and drag it to the document generation layer 6. Place layer 6 below layer 5, set its layer blending mode to Brighten, and press Ctrl+T to adjust the size and position appropriately.
17. Click "Straight Text Tool" and select "Boyang Shu Hang 3500" as the font with a font size of about 96 points.
18. Click and enter the word "Wudang" in the document, and then select the menu "Layer->; Layer Style ",check" External Luminance "and" Bevel and Relief ",set the external luminosity appropriately, and set the specific parameters.
19. Set the font and size appropriately, enter the words "Promoting Chinese Wushu" and "Showing Chinese National Spirit" in the lower right corner of the homepage, and set the layer style "External Luminance".
20. After the basic design of the front cover is completed, design the back cover. Open the original image 6, drag it into the generated layer 7, set its layer blending mode to "positive overlay", and then place it in the upper right corner.
2 1. Set the font (for example, calligraphy with brush version 2.0) and size appropriately, input the words "Tai" and "Pole" respectively, and set the style of the outer luminescent layer.
22. Then enter the words "Wudang Mountain in Hubei, China" in the lower left corner of the back cover, and set the style of the outer luminescent layer.
23. Next, process page 4, that is, the leftmost page, open the original figure 7, drag it into the generated layer 8, and adjust the size and position appropriately.
24. Click to select the magic wand tool, set the tolerance to about 20, and uncheck "Continuous".
25. Click the gray position on the 8th floor (press Shift to cover the selection) until all parts except the text are selected.
26. Press Ctrl+Shift+I to reverse the selection, and then add layer mask to the 8th floor, so that you can get the approximate text content.
27. Click and select the layer mask of Layer 8, and erase some edge noise with a black brush.
28. You can copy the 8th floor to generate a copy of the 8th floor, select the seal part, and delete the rest after reverse selection.
29. click on the selected layer 8, and select the menu "layer->; Layer style->; Color Overlay ",set the overlay color to black.
30. Erase some variegated colors with the black brush tool, and then superimpose the color of the "eighth copy" in the same way, and set the superimposed color to red. In addition, you can also increase the external lighting style, in short, as needed.
Free design, by this time, the front of the three-fold is basically completed. For publicity color pages, don't have too much text content, because few people will read the content carefully, so try your best.
Simple pictures and words will express what you want to express, which is the focus of design!
To make a folding effect, first copy the picture, select the lower right corner of the rectangular tool box, fill it with black and white gradient colors, and deform it to form a folding effect. The new layer below is filled with black, deformed, blurred with Gaussian, appropriately reduced opacity, used as a shadow, and finally a new background is created. I recommend you to use CorelDraw, with its own folding function! If you use PS, it's quite troublesome! With CorelDraw, there is a folding function! It's difficult to answer this question, depending on what you want to do and what size. It's simple. As long as you can typeset.
How to get a 30% discount? What is the design sequence? The three-fold folding method is: fold the right side first, and the left side of the cover, that is, the cover is opened to the left, as shown in the following schematic diagram:
The design method is as follows:
Step 1: First, we open the artificial intelligence software and create a new document. We must use mm as the unit, and we must use CMYK as the color mode. The bleeding value is set according to printing.
Step 2: Click the right mouse button on the sketchpad to display the ruler.
Step 3: Drag on the ruler and pull out the dividing line, so that you can easily design the three folds.
Step 4: Use the rectangle tool to draw a rectangle with the same size as the sketchpad as the background and fill it with color.
Step 5: first determine the contact information of the 30% discount page and set it in the lower left corner.
Step 6: Draw a big rectangle with the rectangle tool, rotate it, and then subtract the unnecessary parts with the shape generation tool.
Step 7: Then we set the gradient color to increase the effect of three folds together.
Step 8: Then we add various shapes to enrich the whole picture.
Step 9: Finally, we can add some words like slogans to finish it.
Extended data:
Design skills of publicity pages:
1, the leaflet can't be just words without pictures, and the pictures on the leaflet should account for a relatively large proportion, which should be controlled at 60% to 70%, because when consumers open the leaflet, they pay attention to pictures and rarely take into account words.
2. There should be a good title in the text description, in other words, the contents of the fold should attract consumers to continue reading.
Don't design the leaflet as 10% to 20% discount. Generally, the number of lobules is 3-4. For a consumer, what he wants to get in the shortest time is the information of a product. If there are too many folds in the design, consumers will have no patience to look at it. At the same time, it is also necessary to publicize the information of the folding page and strive to be concise. Fold the right side first and cover it on the left side, that is, the cover will open to the left, as shown in the following schematic diagram:
How to make a three-fold ps 1 and determine the size of the fold.
Open PS, fill in the size, and add the bleeding position to the filled size. Add 3MM deflation position on each side. For example, the width is 30CM, the actual filling is 30.6CM, the height is 20CM, and the actual filling is 20.6cm ... Remember that the unit is cm.
2. Determine the resolution of the hinge.
The print resolution of hinge is 300DPI, the number of inputs is 300, and the selection unit is: pixel/inch, which is the general resolution of printed output.
3. Determine the color mode of the hinge.
The color mode of printing is CMYK, not RGB, so you should choose CMYK mode when creating a new document.
4. Select View → Check (√ ruler) in the PS menu bar.
In the upper left corner, drag the ruler to the position of 3MM with the mouse, and then release the mouse, and you will see a blue line. After dragging the ruler to the position of 3MM on the left and upper side, the blue line will show a square area.
5, the other three Angle, in turn, drag out 3MM feet.
This is the printed bleeding line. The contents of the text and the main picture should not exceed this bleeding line position, and the parts other than the bleeding line should be cut off when printing.
6. Three folds are fixed to the position of each broken line.
For example, if a 30CM-wide fold is to be made into three folds, and each fold is 10CM, then we need to fix the position of 10CM, as shown in the figure. The positions of 10CM and 20CM are marked with blue lines, and the position of broken lines should be considered when designing text and picture contents.