Technician's work plan for the second half of the year 1 In order to give full play to the role of the laboratory, adapt to the new curriculum standards implemented by the new curriculum reform, make students pay full attention to and learn science well, stimulate students' interest in learning and applying science, and improve the professional level of natural science teachers, the work plan for this school year is as follows:
I. Guiding ideology
Guided by advanced scientific education and teaching concepts, we should adhere to Scientific Outlook on Development, deepen education reform, deepen quality education, and adapt to the new curriculum standards implemented by the new curriculum reform. Strengthen system construction and lay a solid foundation for management. Implement quality education in science teaching, implement the school's work plan and teaching plan for the new semester, improve teachers' professional ethics and professional ability, create a space suitable for students' development, publicize students' personality, and comprehensively improve students' scientific literacy. Further take science teaching as an important position to implement quality education. Pay attention to cultivating students' innovative spirit, independent inquiry, practice and other abilities, so that students can pay full attention to and learn science well, and stimulate their interest in learning and using science.
Second, the task
In order to realize the scientific, standardized and institutionalized management of laboratory practice teaching, establish a good teaching order, improve teaching quality, and successfully complete various practical teaching tasks in this semester, combined with the actual situation of our laboratory, the laboratory will carry out work in the following aspects this semester:
1, to clarify the purpose and significance of the experiment. On the basis of raising awareness, strive to meet the construction standards; Comprehensive equipment support; Scientific norms of management; Pay attention to practical results in use.
2, in accordance with the requirements of the provincial standardization laboratory and the "Catalogue of Teaching Equipment for Primary Schools in Hebei Province", focus on the purchase of experimental equipment and facilities that can meet the needs of existing textbooks. All the instruments and equipment matched with the current teaching materials should be equipped, and the service of classroom teaching and extracurricular scientific and technological activities should be done well.
3, the instrument storage responsibility to the people. To strengthen the management of laboratory instruments and equipment, low-value durable goods and low-value consumables, we should:
(1) regularly check, check and count the laboratory instruments and equipment to ensure that the accounts, materials and cards are consistent; Lost, damaged or scrapped, should be registered and reported; The storage place is convenient for storage and access, and it should be scientific, neat and beautiful as far as possible.
(2) The system of recording and borrowing instruments and equipment shall be implemented. If there is any loss or damage, it shall be handled as appropriate.
(3) Implement the warehousing and picking registration of consumables, and strictly control the waste of consumables in use.
(4) Maintain the experimental instruments and equipment regularly, ensure the intact rate of the instruments and equipment, and make use and maintenance records.
4. Discipline is the basic discipline to promote the development of social productive forces. Therefore, we must strengthen the leadership of experimental teaching.
5, the implementation of natural laboratory code, loan compensation system, safety system, etc.
6, cooperate with teachers to carry out activities, carefully study textbooks, study teaching methods, open good classes, and improve the teaching quality of science subjects.
Third, specific measures.
1, further improve the rules and regulations of laboratory management and seriously implement them. Do a good job in laboratory safety and daily cleaning and hygiene.
2. Earnestly study the standard requirements of provincial standardized laboratories, carefully correct them item by item, form * * * knowledge, strengthen the awareness of laboratory construction and management, and further improve the level of laboratory work. Strengthen the routine management of science teaching, urge teachers to do experimental classes well, and vigorously advocate students' independent design of experimental methods in experimental classes to cultivate students' innovative consciousness.
3, strengthen the report for instructions, timely report to the leadership of the difficult problems in education and teaching work, to obtain leadership support.
4. Strengthen the business study of existing personnel and pay attention to their own improvement. Science teachers should learn new science curriculum standards, make clear the requirements of science curriculum, attach importance to the importance of science and teach science well. Carry out training and study on the use of experimental instruments, make full use of instruments and equipment, and offer complete experimental courses. Organize science teachers to listen to each other and go out to listen to lectures, learn from the advanced experience of other schools, make up for their own shortcomings, and gain the benefits of science education and teaching.
5. Encourage teachers to make teaching AIDS and enrich teaching materials and experimental facilities.
6. Guide students to carry out the second class activities (writing small papers and making small works).
7. Summarize the final work, count instruments, equipment and medicines, and make purchasing plans.
Technical personnel's work plan for the second half of the year 2 Main tasks completed in the first half of the year:
1, formulate detailed and practical work plans.
According to the requirements and tasks of the Project Office for the "subsidy project of basic agricultural technology extension", combined with the actual situation of Mo Jing Township, which I want to guide, and taking the service of "agriculture, countryside and farmers" as the standard, the specific implementation plan is formulated.
2. Visit agricultural science and technology demonstration households
After the meeting, we carefully chose to visit 2 1 key agricultural technology demonstration households and general demonstration households to understand the basic situation, production status, existing problems and opinions of farmers in detail, so as to ensure the orderly development of science and technology household work.
3, formulate household implementation plan.
According to the visit to agricultural science and technology demonstration households, I have carefully formulated the household guidance scheme, and according to the situation of different agricultural science and technology demonstration households, I have formulated the household implementation scheme, which has formed a good cooperative relationship with farmers.
4, the door to do a good job of wheat, corn, melon planning guidance.
In the critical period of production and management of wheat, corn and melon, we went deep into the fields to conduct research and technical guidance, and put forward different management opinions according to the different growth needs of wheat, corn and melon at different growth stages and the different situations of demonstration households.
5. Complete the trial sowing work on time. This year, there are dry farming experiments of oats and barley and fertilizer efficiency experiments of 34 14 corn in Abdullah township.
6. Report the sowing progress of wheat, corn and melon to the township in time when spring ploughing is busy.
7. Complete the information reporting work on time.
Second, the second half of the work plan
1. According to the requirements of demonstration households, the guidance content and scope should meet the requirements of demonstration households.
2. Complete all the work of the technical tutor according to the established plan.
The technical staff's work plan for the second half of the year is coming to an end. As an electromechanical technician in the mechanical and electrical room of XX Mine, in order to better carry out my work in the future, I made the following personal work summary for this year's work, and now I will report the work content and work plan for 20xx as follows:
I. Summary of work
At the beginning of the year, with the normal mining of XXXX fully mechanized mining face, the work of electromechanical specialty was also carried out normally. According to the related requirements of safety production standardization, the mechanical and electrical equipment, ledger and inner pages in the responsibility area were related, the technical ledger of fully mechanized mining equipment was established, and the relevant technical parameters of each equipment were statistically registered. At the same time, a maintenance account is established, which records the daily maintenance and fault handling of the equipment in detail, and grasps the detailed technical data of the equipment to facilitate the subsequent equipment maintenance.
According to the relevant work requirements in the Notice of the State Administration of Coal Mine Safety on Printing and Distributing Five Special Supervision Plans, such as "One Ventilation and Three Preventions" in 20xx, the mechanical and electrical room carried out special inspection on hoisting transportation according to the relevant work arrangements of the document contents, and at the same time carried out mechanical and electrical professional inspection, and conducted all-round on-site inspection on the responsible area and other teams, and passed the safety inspection three times a month and weekly. Greatly improved the quality of the work and internal page management of the mine transportation electromechanical specialty. Although remarkable results have been achieved through many special inspections, the concept of heavy-duty maintenance should be firmly established to ensure that the phenomenon of low-standard operation will no longer occur.
Due to the arrival of mechanical and electrical equipment overhauled in XXXX fully mechanized mining face, receiving equipment and counting began again. Because the mechanical and electrical equipment of fully mechanized mining face is completely dismantled after overhaul, a wide variety of parts and components bring great difficulty to inventory. Through the equipment manual and other technical materials, I learned the common sense of the components of this batch of equipment. After 1 several months, the equipment reception, the inventory and handover of equipment parts and materials were successfully completed, and various inspection materials were actively prepared during this period. At the same time, the acceptance standard of installation and withdrawal of fully mechanized mining face is compiled, which is convenient for acceptance during and after the installation and withdrawal project.
XXXX fully mechanized mining face equipment installation is completed, the mechanical and electrical room related management personnel first pre-acceptance of fully mechanized mining face, check out some problems and hidden dangers, and send them to the installation team. After the rectification of hidden dangers and problems is completed, it will be re-inspected, and then formally accepted by the group company and various functional departments, and successfully passed the equipment installation acceptance of XXXX fully mechanized mining face.
After the installation project of XXXX fully mechanized mining face is qualified, XXXX fully mechanized mining face will begin to retreat. The relevant personnel of the fully mechanized mining team and I will count the equipment, materials and facilities of the fully mechanized mining face in XXXX in advance, register them, establish first-hand information in advance, and then hand them over to the installation team through formal equipment counting. After the formal evacuation, I will be responsible for the equipment inventory and handover of this equipment evacuation. Through the withdrawal and inventory of equipment in XXXX fully mechanized mining face, we have a more intuitive learning opportunity for equipment structure and working principle, and understand the details that we can't understand at ordinary times. After more than 1 month, the equipment, accessories, materials and facilities were counted on site, and the equipment was registered and handed over every day, and the number of equipment on site was accurately checked, which successfully completed the withdrawal and handover of equipment in XXXX fully mechanized mining face. During this period, assist the relevant leaders of mechanical and electrical specialty to prepare all kinds of inspection technical data, check the actual situation of inspection items, and carry out benchmarking rectification for some items that do not meet the requirements and regulations. At the same time, the mechanical and electrical equipment of XXXX fully mechanized mining face is tracked and managed, and relay protection setting is carried out reasonably to ensure the operation of mechanical and electrical equipment and prevent the equipment from being damaged due to unreasonable relay setting value.
Due to the incomplete and inaccurate technical requirements related to parts procurement, the technicians in charge of the mechanical and electrical room and the relevant management personnel of the district team began to report the monthly parts plan every month from April. I am responsible for this work, summarizing the accessories of each district team and reviewing the relevant technical requirements of accessories. It is also a learning process, to better understand the knowledge of parts materials and related processing technology, and organize relevant district team personnel to carry out acceptance after arrival, so as to achieve the purpose that there are no technical and material problems in parts procurement.
20xx is coming to an end, and there are still weak links in technical management. I will continue to work hard, strengthen business knowledge learning, establish the concept of lifelong learning, form a good habit of learning what I lack, earnestly perform my duties, constantly improve myself from the technical and management levels, enrich my business knowledge, and better complete all the professional and technical work I am responsible for.
Second, the work plan
The year 20xx is coming. In the new year, I will set higher standards for myself. According to the 20xx mining plan, work out relevant operation procedures, insist on checking the equipment operation at the site, actively cooperate with the site to deal with the faults when the equipment has problems, understand the first-hand information of the on-site operation of mechanical and electrical equipment, better prepare the maintenance plan and related safety technical measures, and actively and diligently complete various tasks assigned by the chief engineer and the leaders in charge.
20xx work plan
1, daily update and change records of office management, equipment ledger and cable ledger related to mechanical and electrical specialty of fully mechanized mining team.
2, accounting fully mechanized mining equipment installation, withdrawal of lifting transportation tension calculation and data update, preparation of mechanical and electrical transportation professional safety technical measures during installation and withdrawal.
3. Compile the power supply design and related safety technical measures of XXXX fully mechanized mining face.
4, fully mechanized mining team equipment installation positioning system and power supply system diagram update.
5, fully mechanized mining team is responsible for all kinds of mechanical and electrical equipment brand management and hanging in the area.
6, at the beginning of the working face, at the end of the mining, constantly check the operation of the equipment, standardize the use of equipment, timely calculate and adjust the relay protection setting of each equipment, ensure the normal operation of each equipment, and organize the training of electric tongs maintenance workers and special workers of fully mechanized mining team.
7, in strict accordance with the relevant provisions of the "coal mine safety regulations" for the determination of electrical equipment grounding resistance.
8. Organize electromechanical management personnel of fully mechanized mining team to check the explosion-proof performance of explosion-proof electrical equipment in the responsibility area every month.
9. Standardize the implementation of daily inspection, shift inspection and monthly inspection of mechanical and electrical equipment and the daily management of filling relevant records.
10, participate in the monthly material plan and annual material plan report of fully mechanized mining team.
1 1. Organize relevant regional teams to make statistics, review and report the monthly spare parts plan in advance every month to ensure the accuracy of the technical requirements of spare parts, and organize the acceptance of the delivered spare parts.
12, complete the related internal pages of the mechanical and electrical room and other work arranged by the leaders.
Technician's work plan for the second half of the year. After working as a technician in the third mining area of coal mine, this comrade worked hard and kept improving. In charge of technical data management, he actively studied business knowledge and mastered new technologies. According to the actual situation on site, he compiled corresponding rules, regulations and measures to guide the construction of site operators, which provided a lot of valuable coal mining technical data for our mine and played a positive role in promoting the safety production of our unit. The main results are as follows: (1) The recovery rate of iron shed at both ends of coal mining face is improved. When mining in 350 1 lower slicing face in our mine, the support of two lanes is seriously deformed, the iron shed is difficult to withdraw, and the safety factor is low. Through technical innovation, the way of replacing iron shed in advance was improved, which reduced the labor intensity of workers, enhanced the safety of evacuation, improved the recovery rate of iron shed and reduced the input cost of iron shed. Large dip angle coal mining provides special operating rules and safety technical measures to ensure safe production. 34 1 1 working face is the working face with the largest dip angle of coal seam since the mine was built, with the maximum dip angle of coal seam reaching 45 degrees and the maximum caving angle of working face reaching 28 degrees. It is difficult, unsafe and inefficient for people to walk. Through working practice, safety technical measures are formulated and the working face is adjusted. Reduce the mining angle of the working face, set up safety stops, tie all pillars tightly to prevent falling, and set up prop-pulling platform, which reduces the labor pressure of employees, improves the work efficiency, ensures safety, and makes the working face with large dip angle safe, efficient and smooth.
I. Work in the first half of the year
1, procedures and measures: in the first half of the year, two operating procedures, namely "10 outside the eight-layer coal pillar I" and "7 107 working face", and 30 safety technical measures were compiled, which were communicated to employees in time.
2, safety education:
(1) According to the coal mine professional safety technology training plan, employees are educated and trained in safety knowledge on Tuesdays, Fridays and before and after work.
(2) According to the requirements of the Mine Safety Training Section, the employees in the whole region were given "one question a day" study, and they actively participated in various safety training examinations organized by the mine, and won the title of "Red Flag Unit for Safety Training".
3. District Team Management: As a member of the district team, I earnestly performed my duties, participated in the management of the district team, actively put forward reasonable suggestions on safety technology to the district team, held a meeting after work, conscientiously implemented the resolutions of the district team, and actively maintained the unity of the district team.
Second, the problems in the first half of the year.
1, in terms of procedures and measures:
(1) There are some phenomena such as untimely formulation of rules and regulations, low quality and lax requirements, and the main leaders of the mine sign rules and regulations outside working hours, which affects the rest of the leaders and delays the production of the district team.
(2) When learning communication procedures and measures, some measures only tell employees what they are doing, and cannot be identified in time.
There has been a phenomenon of truly conveying the contents of procedures and measures.
(3) When the location of the working face changes, targeted measures cannot be prepared in time, and there is a phenomenon of delay and slack, which requires superior leaders to arrange and supervise the preparation of measures.
2. In terms of safety education and training:
(1) There are employees who have a low understanding of individual culture and cannot patiently and meticulously carry out education and training.
(2) The loose management of technical learning leads to the phenomenon that individual employees do not participate in learning or leave early. For a single team leader, it is difficult to strictly require them to participate in technical learning because of the pre-consideration.
3. In terms of regional team management:
First, there is a lack of detailed management and humanization, and general violations at the scene cannot be stopped in time.
Second, it is impossible to track and help some vulnerable people in the district team in time.
Third, when the site conditions are poor and change, there is a phenomenon of grumbling and distress.
Three. Work plan for the second half of the year
In view of some problems existing in the first half of the year, I am determined to do the following work in the second half of the year:
First, seriously study technical business knowledge, combine what you have learned with practice, and improve your business level.
The second is to do a good job in technical business knowledge training so that every employee can master basic technical business knowledge.
Third, formulate detailed rules and measures in time according to the site changes of the working face, and convey the contents of the measures to every employee in time.
Fourth, do a good job in on-site safety hazard investigation and routine operations of employees, report major safety hazards to mine leaders in time, and explain the hazards of illegal operations and existing safety hazards and how to prevent and deal with them to employees before and after work.
Fifth, strive to improve the management level, hold pre-shift and post-shift meetings, and do a good job from strict to detailed.
Six, strictly abide by the rules and regulations of the mine, strictly implement the duty system, abide by labor discipline. In recent years, coal mine accidents have occurred from time to time all over the country, causing great losses to people's life safety and state property. He Xiqing knows the importance of safety in coal mine production, so he always puts safety first in his work.
First of all, organize technical study on time every Tuesday, explain the key and difficult points of safety to employees in detail every time, improve their safety operation level, and patiently do their ideological work to improve their safety awareness. In order to improve employees' learning enthusiasm, He Xiqing has formulated a learning incentive system to reward those who have good learning effects, criticize and punish those who have poor learning effects, and use economic leverage to promote employees to actively learn business theory and operational technical knowledge, thus improving their formal operation level.
Secondly, He Xiqing often goes down to the well and is familiar with the status quo. Every time he goes into the well, he must write down the key points of safety production in his notebook and formulate production measures on the spot. When arranging the work, he will tell the workers in detail the production and safety points of the work, formulate safety construction measures, and designate the person in charge of safety to ensure safety in production. The work assigned by Comrade He Xiqing basically put an end to mistakes.
This comrade loves his post and is dedicated to his work, studies science and technology assiduously, studies his business assiduously, constantly improves his business level, solves a lot of technical problems for on-site production, and makes great contributions to the safe production of Taoyang Mine. The main achievements are as follows: In practical work, corresponding rules, regulations and measures were written in time according to the site conditions, and were strictly implemented on site, and no technical problems occurred, thus ensuring the construction safety. Carefully analyze the stope, predict the changes of the working face in advance, and eliminate hidden dangers in time. In particular, measures such as safe mining of upper and lower coal in 34003 (upper) working face and noodles mining in 3026 and 3204 working faces were taken. This comrade actively participated, carefully studied and analyzed the site situation of coal mining face, predicted the changes and hidden dangers of coal mining face in advance, and formulated the optimal mining plan in time. 3 yuan participated in the formulation of the mining plan of the 3309 (lower) re-mining face in May, and the mining was carried out under the condition of no net on the roof. By taking measures such as advanced control and re-laying the net, the safe mining was realized. In May this year, I participated in the formulation of the mining plan for the upper working face of 34004. In the case of large mine pressure, broken roof and difficult support, our institute has safely mined 3 1.500 tons of coal by strengthening the support strength of working face and controlling the roof in advance, and achieved good economic benefits.
The comrade carefully studied the relevant safety documents of his superiors, went deep into the site to grasp the key points, arranged to deal with the unsafe hidden dangers on the site in time, and stopped the illegal operation and illegal command on the site in time. Especially when the coal mining face passes through the fault, the initial pressure and the working face retreats, I can stare at the scene in three shifts, just like the workers, and handle the problems in time when found. Never care about personal gains and losses, and attend work for more than 28 days a month on average. Run the well for more than 24 days every month, and work closely with the leader to lead the employees to complete the assigned tasks on time and successfully complete the tasks assigned by the leader. Since taking office, Comrade * * * has put forward more than 40 rationalization suggestions for the district team, and found and handled 20 potential safety hazards.
Technical personnel's work plan for the second half of the year 5 has entered the new year xxxx in a blink of an eye. The new year should have a new atmosphere. While summing up the past, we should make plans for the new year. I am a short working time and inexperienced staff member. I need to study further in many aspects in order to make greater progress and achievements in the new year.
Xxxx is a very important year for the development of our company. It is also a challenging job for a newcomer who has just engaged in water prevention and control. For myself, I should adjust my work mentality, enhance my sense of responsibility, study fully and do my job well. To this end, with the enthusiastic help of my colleagues and brother departments, I gradually learned the knowledge about water prevention and fully realized my current shortcomings. In order to grow into a qualified employee as soon as possible, I made the following annual work plan:
First, geology:
1, and provide all kinds of geological data and explanations timely and accurately as required.
2. Enrich the contents of geological and hydrogeological forecasts and publish them on time.
3. Carefully investigate hidden dangers and solve problems.
4. Continue to do a good job in ground geophysical exploration and drilling, and provide first-hand information for production design.
5. Continue to investigate ground cracks.
6, to investigate the surrounding adjacent mines, and formulate hydrogeological reports and safety measures.
7. Strengthen study and improve personal quality.
Second, prevention and control of water:
1, conscientiously implement the provisions on prevention and control of water in coal mines, the standardized standards for safety and quality of coal mines and assessment and scoring methods, the provisions on prevention and control of water in coal mines, relevant documents on prevention and control of water and the spirit of the meeting, strengthen the investigation of hidden dangers of mine water disasters and the forecast of water regime, and eliminate hidden dangers of mine water disasters in time.
2. For each new heading face, prepare drainage design and safety technical measures, and send them to the heading team for research and implementation.
3. Monthly flood forecast is updated in time.
4. Fill in the monthly summary of water situation and flood disaster.
5, hidden investigation and analysis records to fill in.
6, the rainy season three inspection and implementation records
7. At the special meeting on water prevention and control organized at the beginning of each month, learn to coordinate and solve the difficulties and problems in water prevention and control, summarize the changes of mine water inflow last month and the achievements and shortcomings in water prevention and control, and formulate the water prevention and control work plan this month.
The above is my plan for xxxx, which may not be mature yet. I hope the company leaders will correct me. The train runs very fast on the headband, hoping to get the correct guidance and help from the company leaders and colleagues. Looking forward to xxxx, I will work harder and be serious and responsible. Let the work be full of vigor and vitality!