7 materials

8 Material Forming and Control Engineering

9 material chemistry

10 materials science and engineering

1 1 materials physics

12 financial management

material

A What do you usually do after graduation? What about employment and income in recent years? Can you tell me something about your graduating class?

After entering the factory, the parts are designed and cast and cannot be used immediately. It is necessary to formulate a heat treatment process to strengthen them and ensure the life of the parts! Now most students are engaged in this major (metal heat treatment), some are engaged in metal forming, and some are gone! My respiratory tract is bad, so I didn't do this major, because the factory is not suitable for me, and I am looking for another way out. ) This major is mainly engaged in technology! (Jiamusi University) wwy

The graduates of materials science in our school are all doing heat treatment. Other schools may go in different directions. At our age, facing graduation, there may be many things. On the one hand, those who are looking for a job, taking the postgraduate entrance examination, taking the public property examination and going abroad are all preparing. On the other hand, we have to study courses. I haven't finished teaching specialized courses yet, and there is factory practice, which is a comprehensive experiment. Four or five people form a team to complete it. Because we are two majors, we will carry out a graduation project of materials this semester. However, children majoring in science will not formally do graduation projects next semester. If it's a girl, I don't think it's suitable for engineering. Generally, science and engineering boys will be more popular than girls. On the one hand, good enterprises choose schools, on the other hand, people are divided into boys and girls. The recruitment ratio is also different.

I am a material software. I signed two Huawei companies, two Beijing Nankou Railway Bureau 1 TRE Software Company 1 Alpine Company 1 CSR Qiyuba Research Institute 1 Neusoft, with 9 graduate students. Single study materials are basically for postgraduate entrance examination, and it is not easy to find a job. It is also a locomotive factory and a steel mill (Dalian Jiaotong University)

Material specialty can be divided into material processing engineering and material science and engineering (in fact, metal materials), and it is best to choose the specialty of material processing such as welding, casting and mold design. (high salary); Never learn metal materials, you can only do heat treatment when you come out (salary is below 2000 (Dalian Jiaotong University)

I haven't got a job yet and I don't know what to do. I can do many things. Technical engineer or something. My classmates signed Chery, Midea, Foxconn, BYD, Chimei ... Those companies are not bad. (Zhengzhou University)

Material forming and control engineering

A what do you usually do after graduating from material forming and control engineering? What about employment and income in recent years? Can you tell me something about your graduating class?

I took the postgraduate entrance examination. I chose this road because the university is not so good and it is not easy to find a job. (East China University of Science and Technology)

Machinery-related can be, but our major is mold design and manufacturing, casting, welding and so on. (Sichuan University of Science and Technology).

Can do mold design. There are plastic molds and metal molds, and there are many kinds. Shell molds are more complex and diverse. Now I'm designing the connector mold, just like those plastic parts of USB excuse. Our classmates take buses, monitors and the like. Actually, it depends on what job you are looking for. Even if the company looks for someone in this field, after you go, what you do is not necessarily the design of molds, but the work related to molds (to be precise, it should be related to machinery). (Harbin Institute of Technology)

There are too many capable facts! As far as our class is concerned, there are those who have gone abroad, those who have been in Shanghai and those who have taken the postgraduate entrance examination. In short, all walks of life have our brothers and sisters. What kind of job you can find depends mainly on your own efforts! (Harbin Institute of Technology)

Anhui University of Technology is a very good major with an employment rate of 100%. This major is a more accurate combination with steel, and the working environment may be worse in the future. After all, the job needs to be a first-line trainee (except girls), and the job salary is still ok. As long as the signed factory is better, it should be more than two thousand a month. Postgraduate entrance examination is also good, and the treatment of graduate students is much better than that of undergraduates. (Anhui University of Technology)

We can do a lot of work, what the mechanical department can do, such as workpiece design, production management, equipment engineers, molds and so on. Industry is electromechanical, automobile, auto parts, plastic molding! It's basically manufacturing! (East China University of Science and Technology)

I am working now, and our professional employment rate is quite high. Almost all of us have found jobs, and the salary is around 15002000. There are many people in our major who take the postgraduate entrance examination. We were 94 people, 4 1 person took the postgraduate entrance examination and got into more than 20. (Henan Polytechnic University)

Our professional courses are mainly related to molds, and the basic courses are mainly mechanical design, so there are actually many directions for work after graduation, and anything related to machinery can be done. If the division is more detailed, it is the work of mold design. Although the mold is developing rapidly now, the starting point for undergraduates to engage in this industry is not high, and they can only start from a low level, which is also a * * * nature of design work. If they want to be at least 35 years ahead, the market is still bullish. If you are a girl, it is recommended not to choose this industry. After graduating from our class, there are not many people engaged in mold-related work, mainly engaged in other jobs related to machinery, because many companies now require a mechanical background, which may not require you to be proficient, but at least know something about machinery, and then do sales and technical support, which is relatively easy. It is not difficult to find a job after graduating from the mechanical department, but the starting salary is not high. Let's jump 3000 for our undergraduate students in Shanghai (East China University of Science and Technology).

Well, you can do many things. If you learn casting, you can go to some factories that need tools. In short, you can go to an ordinary factory and be an engineer or something. If you can, you might as well learn mechanics and find a job. (Jiamusi University)

I took the postgraduate entrance examination and am now a graduate student. Life in graduate school is similar to that in university, so I have more time to myself. There is a lot to learn. (Shandong University of Technology)

I don't know the employment rate, but I know the salary, about 1500 (Shandong light industry)

The employment rate is very high, and almost all of them are employed. Average income. 1500 to 4000 (Harbin Institute of Technology)

Employment is very good, basically everyone can find an ideal job, but the income is not too high, basically around 1500. If you want to be stable, this major is good (Taiyuan University of Science and Technology)

The major of material control in our school is relatively easy to find. Every year, from the first year to the fourth year, the company recruits people, and there are many job fairs. However, the income in the mainland is not high, 1000 is a little more, and it may reach 2000 in coastal areas, but it depends on personal ability. (Sichuan University of Science and Technology)

B what does material forming and control engineering learn? What kind of study is suitable for? Are there any special requirements?

This major is the forming, ironing and welding of metal materials, or heating, melting and casting. It can also be made of nonmetallic materials. This major is suitable for people who love to learn, and it is very tiring. If you learn it, you should have a good life in an enterprise mainly engaged in mechanical processing. I have graduated and work in Beijing (Taiyuan University of Science and Technology).

There are several major directions in this major: 1 welding, 2 pressure machining, 3 heat treatment, 4 casting and 5 surface treatment. In fact, it is a major that favors boys, and it is difficult for girls to find jobs. Of course, boys in this major are very easy to find jobs, and senior talents in this field are very scarce in China. The materials here are mainly metal materials. In recent years, many universities have set up this major, both good and bad (Taiyuan University of Science and Technology).

First of all, this major is an engineering major and belongs to the mechanical major. People who like to study science are suitable for this major, but it is best to find a better science and engineering college to study this major, so as to ensure a good job search. After graduating from this major, I generally engage in industries related to metal material processing, such as automobile production and mechanical processing. (Taiyuan University of Science and Technology)

It's good for boys to study this major, and they don't have to worry about their work, and their salary is ok, but it's not good for girls to study this major, because the working environment is not very good! However, it is still very promising for girls to learn this major! (Henan Polytechnic University)

In fact, this major has a wide range, and the focus of each school is different. As far as our school is concerned, it mainly involves material properties and molding methods, welding and casting, and heat treatment of surface process molds. If it is a boy, this major is good. If it is a girl, it needs to be considered. If you want to engage in design or research in this field in the future, you can also do it for girls. (Jiamusi University)

How about C material forming and control engineering in your school? What is the prospect of this major?

It is easy to find a job. This major is a national key discipline, and its development is ok, but it is boring to learn. Maybe it's depressing after entering the university. Not many people like this major, but it's easy to find a job now. (Harbin Institute of Technology)

To tell the truth, if it is developed in the province, the gold content is still very high. If you want to go to other provinces in the future, you can consider other schools. Our employment rate has been 99%, and that one percent is students who don't want to find jobs. . (Fuzhou University)

According to the teacher, it should be possible! It is a better one in our school. For the future development, I can only say that this major is a relatively good employment major (Shandong Institute of Technology).

The Institute of Mechanical and Electrical Engineering and the Institute of Materials are the signboards of our school, and they are both easy to find jobs. Electromechanical hydraulic pressure is the best, and the welding and stamping of materials are good! (Taiyuan University of Science and Technology)

Is this major okay? Our class has a high employment rate. The overall salary level is 3000. SAIC, Baosteel and many famous foreign companies are all ok (East China University of Science and Technology).

D material forming and control engineering major? What advice do you have for junior students who want to study this major?

Material forming and control engineering generally includes three main directions: welding, mold (mainly plastic mold and stamping mold) and casting. For engineering, the employment of this major is not a problem. Of the three main directions, casting is the most common, and the working environment after graduation is a little worse, and it seems that the future development is not as strict as the other two directions, but some schools are not strict. I feel that no matter which direction, as a material major, some courses of "Fundamentals of Material Science" are called "Material Science", which is still relatively important. It is necessary to know the main components and properties of some commonly used materials. There is no need to remember every knowledge point, but you should know something about them, know what courses you have studied, and look them up in books. Memories are mixed, so you should read them often and have some professional background. For some concepts that you don't know or don't know, you should always ask or search on Baidu. I also often use Baidu to search, and the effect is good. The direction of our school is not very clear. My current job is mainly casting. I suggest that it is better to engage in mold or welding if you are interested or capable. One's deceased father grind, welding is better, the treatment is good (Anhui engineering science and technology)

It is easy to find a job. Generally, large and medium-sized state-owned enterprises are the mainstay, so the salary is good. But it's good to work hard in the first two years, and it's not bad to mix. If you can't get along in the first line, the environment is not good. I advise the rich not to choose this major because they are all poor (Anhui University of Technology).

It is best not to choose the major of material science. It is too difficult to find a job, and there is basically no counterpart (Shandong Light Industry)

Do you want to find a job or do research? If you want to find a good job, you should learn welding better. If you want to do theory, you must learn to throw it better. It's tiring not to study engineering hard. If you have your own interest in processing, you can learn these things ... because it is also a very gratifying thing when the processing methods you design can improve the performance of products in all aspects (Henan Institute of Technology)

The specialty is very good and the prospect is good, especially welding. We must learn professional courses well! Take it seriously during the internship! Do more hands-on operations! If possible, you'd better get a welder's certificate at school! (Henan Polytechnic University)

E material forming and control engineering is suitable for postgraduate entrance examination or work after graduation?

If you have a solid grasp of professional courses at the undergraduate level, there is no need to take the postgraduate entrance examination. If you think you know nothing about your major, you can consider taking the next study. Of course, the premise of these is that if your family allows, you need to have a solid foundation to study abroad, otherwise the road to study will be very hard! (Huazhong University of Science and Technology)

/blog/static/9431074220088115337932/edit/This blog has many wonderful professional introductions. I suggest you have a look.

If you want to find a good job, you can come out! For students majoring in mold, they mainly study autoCAD, PRO/E and UG software! These are the main indicators considered by employers! And on this basis, we should also learn professional theoretical knowledge properly! If you are learning the direction of welding: it is recommended to learn more theoretical knowledge such as welding methods, welding processes and welding processes! The more you know about welding, the better! (Harbin Institute of Technology)

It is a good development direction (Harbin Institute of Technology) to get more certificates (computer, foreign languages), learn some 3D modeling software, graduate to a famous enterprise and do technical sales for two or three years.

Freshman, of course, it's time to be new to the university .. It's the key to be familiar with the university environment and make more friends. Learning: It's still a little early to say this. Let's lay the foundation first There are many courses to learn, such as advanced mathematics, engineering drawing, which are all key courses, and English.

G material forming and control engineering graduate to which unit is better?

Europe, America, Japan, Taiwan Province, state-owned enterprises and private enterprises (Sichuan Institute of Technology) are preferred.

It depends on your small direction, such as mold, welding microelectronics and so on. Working in steel mills, mold companies, solder paste companies, SMT, etc. If you are a graduate student, the treatment will be good! Although the undergraduate job is easy to find, the salary is not very good. (Harbin Institute of Technology)

I think: this is a technical job, and it is not bad to go to some small enterprises. They will pay close attention to you and give you many opportunities to learn. When you have work experience, it will be much easier. It also depends on one's personality. If you want to settle down, find some formal large enterprises, and those with working experience are good. (Shandong University of Technology)

The knowledge of material forming and control is mainly in mold, and the employment scope of this major is mainly in manufacturing. Some automobile manufacturers (such as Guangben, Toyota, Beijing DaimlerChrysler, etc.) have higher treatment, but these enterprises also have high thresholds, and they are also good in the electronics industry (such as mobile phone shell molding). PS: If there are contents about semiconductor manufacturing in specialized courses, you can also enter the semiconductor industry (such as TSMC and Shanghai SMIC). (Huazhong University of Science and Technology)

This major is mainly mechanical work. If you have no other ideas, such as postgraduate entrance examination or civil servants, then go to the mechanical industry, such as automobile mold (Donghua Institute of Technology).

Because this major mainly studies mold design and manufacturing, it is best to be employed in foreign mold factories in Shanghai, Shenzhen and some coastal cities, or to enter automobile manufacturing or other well-known mechanical processing and manufacturing enterprises. As far as my graduated classmates are concerned, our professional employment rate is still relatively high, and most of the enterprises that everyone has entered are quite good. (East China University of Science and Technology)

H

In recent years, the employment situation of this major is getting better year by year, but the working conditions are a bit poor. Generally, universities are not allowed to change majors, but you can take postgraduate exams in other directions. The course of freshman and sophomore is the same as mechanical design, and it will be easier to change mechanical design in the future. In fact, the most important thing for a university is to form a mature way of thinking and dealing with people after four years of exercise. What matters is not what you read, but how you read it. If you really don't like this major, you have to change your direction when you take the postgraduate entrance examination. Studying more during college is good for the future (Henan Polytechnic)

materials chemistry

A what do you usually do after graduating from material chemistry? What about employment and income in recent years? Can you tell me something about your graduating class?

Many mainly go to chemical companies, pharmaceutical companies, chemical companies and so on. Some of them go to graduate school (Jilin University)

Generally, you just enter an enterprise and become a technician after a period of internship. In a few years, you may become a small official. People who have professional knowledge in sales can enter a research institute, which is very difficult (Shandong Light Industry).

Anything can come out of the undergraduate course, but you must go to the grassroots. If you don't want to be a factory worker after graduation, you'd better not study this major. Material chemistry is a very good science, and it will definitely make great progress in the future, but you must choose a good school, which is too far from Heilongjiang University.

The employment prospects of graduates in material chemistry are still ok. I graduated from a cement plant. In the laboratory, all the conditions are good. Other students are in the chemical plant. This means that there is no activity at home, they just submit resumes at home to apply for jobs. Let's not talk about it. Now most students are engaged in technical processing in the unit. It is said that the best one is more than 3,000. I'm not sure if this is true or not. After all, the words came from someone else's mouth, not from the passbook. The important word is chemistry. If you graduate, you should know that after graduation, your job is only related to one or two words of your major. Generally speaking, the chemical engineering major is ok now. (Jinan University)

I'm working. It's hard to find a job in material chemistry. It's an interdisciplinary subject. Few universities offer this subject, and it is not convenient to take the postgraduate entrance examination. This is a pure science, and a lot of knowledge is very complicated! There is nothing to master, the university stage is purely intellectual learning! It is suggested that college students should not apply for this major. If you prefer chemistry, you can choose chemical engineering and technology, analytical chemistry and applied chemistry. These majors are practical and easy to find a job (harbin university of science and technology)

At present, there are two directions in material chemistry: metal and nonmetal. Wuhan Institute of Technology is about nonmetals. To tell the truth, this major is not good at present, because the detailed direction has not yet been decided, and the basic courses and professional courses are very extensive. I said that our school focuses on the testing of old materials, including performance introduction and research methods. They are all relatively broad directions such as cement, glass and ceramics. In the current tense employment situation, it is not easy. Of course, some people go to the electronics industry, such as Yi Sheng Skyworth, but this requires a strong personal ability. It is necessary to have good language organization ability in school. If you don't like it, you are a fool ... These industries are basically sunset industries, but low wages are essential. This is employment. We have more postgraduate entrance examinations, and two-thirds of them are on it! Because of the pressure, I usually study better, and the atmosphere in our class is good, and my study is good. It is easy to enter our school, including Zhejiang University, Academy of Sciences and Design Institute! Anyway, you should be a cadre in the school, not many, just exercise your ability and make many friends. You should have learned about it, (Wuhan Institute of Technology)

After the undergraduate course, materials chemistry is more for graduate students, or do some materials-related work, for example, if English is good enough, but now I am engaged in the work of smelting non-ferrous metals, which depends. In Nanjing University of Technology, I mainly studied the basic knowledge of materials. Therefore, if I work in the future, I will do in-depth research with what I have learned. But the better way out is to go to school. (Nanjing University of Technology)

The chemistry of materials varies greatly from school to school. Simply put, there are two types: metamaterials and metachemistry. Specifically, there are many things to learn and a wide range of research, and each school is different. And this major is new all over the country. Our undergraduate major is inorganic nonmetallic materials. When we graduated, most of our classes were in graduate school, most of them went to battery factories and some went to glass production enterprises. (Harbin Institute of Technology)

Our college has just been built, and it has only been five years now. So we can't compare with other schools in terms of teachers and scale, but our college is developing rapidly. The undergraduate job is relatively easy to find, but the salary is not very good. The students in our class are looking for something between 1000 and 2000. At this stage, the best place for our school to find a job is Sichuan University.

Students of material chemistry have many employment options after graduation. On the surface, both materials and chemistry can be tried, but at the same time, the subjects of material chemistry learning are too complicated, and everything can be reliable, but nothing is very accurate. There are several choices for majors like ours: First, take the postgraduate entrance examination, focus on one direction, and make the knowledge system single-minded; Second, the quality management of enterprises is generally not suitable for girls, because it is necessary to master various processes in the workshop for future management. Third, technicians mainly do some work in the laboratory and need at least two years of experience to be independent. Fourth, sales, I think material chemistry should generally have studied instrumental analysis, which can make a big difference in the field of analytical instruments. Just as the above-mentioned technicians will become teachers in the analysis industry in the future, HKUST has great advantages in chemistry. There are more than 50 people in our class, and more than 50% of them have been admitted to graduate schools. Other employment rates are 100%. The above aspects are our employment situation, and I am now doing analytical instruments. If you are interested in sales, you can recommend several big companies. For example, the food safety in full swing now is a good opportunity for the analysis industry. Generally, enterprises involved in material chemistry are chemical enterprises, such as coatings and materials. But when studying chemistry in the workshop, some chemicals are harmful to the human body. (Qingdao University of Science and Technology)

Private enterprises are tired, and state-owned enterprises are relatively laid-back. But working in some state-owned enterprises can really make people feel bored and a little muddled along. My friend told me. When signing a work agreement, you should be careful not to listen to those people's bravado, no matter how good it is, it is empty, and the so-called treatment that is not written in the agreement is basically a lie. (Jilin University)

Material chemistry is still an unpopular major, and many of my classmates are now engaged in work directly related to chemistry. General chemical companies want such people. Now it has been turned into biomaterials. . (Anhui Normal University)

Actually, my major is hodgepodge. I learn everything, but I'm not good at anything. Go to different places after graduation and see the professional direction. Most of my classmates chose the postgraduate entrance examination. If the school is not good, it will be difficult to find a job unless you are better! Students go to chemical factories, glass factories, ceramic factories, battery factories and other factories. In fact, you can't do anything after graduation, but you have to come back to society because you don't know anything! I'm in graduate school now, and it's hard to find a job.

This major is too unreasonable, with a wide range of studies and no pertinence. It is difficult to find a good job related to this major after graduation. Other professional jobs have no professional advantages and are relatively difficult to find. The employment rate in our class is very low, one is in a bank, and three or four are materials processing companies in some small cities. (China Ocean University)

I think it's best to take the postgraduate entrance examination and further study. This is mainly a research topic. Of course, it also depends on what university you go to. There is a big difference between a good school and a bad school now. Of course, finding a job is also good.

There are 36 students in our class, 13 of them are in graduate school, and several students have postponed their graduation. They are looking for jobs, mainly testing, or skills in a rubber tire factory. Their salaries range from 3000 in Shenzhen, 1 500 in Qingdao, and more than 1 000. It is difficult to find a job after graduation, and the form of employment is severe. Everybody knows that! But don't report the material chemistry in our school. It's a new major, so it's hard to find a job. Like the material major of Jilin University, it has close contact with many automobile companies, which is very good. The salary is also very high. Our school, similar to chemistry, goes to chemical plants. A month/kloc-more than 0/000. (Jinan University)

Good major, but it depends on how you do it (Liaoning University)

Several students in our class went to Foxconn, some from ASUS, others from other jobs. Generally speaking, their employment is ok, because all chemistry-related subjects can be tried, and they are still relatively wide, mainly their academic performance! (Nanjing University of Technology)

I don't know if I graduated from a basic undergraduate course. Most people who don't major in this major are graduate students (Nanjing Institute of Technology) because there are few enterprises in this field in society or they just need a master's degree.

I am a graduate student. As for work, this major is not easy to find (good) because many companies don't know what this major is for. So we can only compete with the majors of metal, inorganic and organic materials, as well as chemistry. I think I'll take a chance. Once I found a big Korean company and didn't go. I have never been to a job fair. I found it online. My classmate's work is not very good either. At least I think so. (China Ocean University)

I graduated last year, and now I am studying in Beijing. I lost my job. At present, the employment in the whole country is not ideal, and Anshi Normal University is no exception, so I should be mentally prepared (Anhui Normal University).

Material chemistry is the combination of material and chemistry. This is a new subject. It is a basic course for studying materials and chemistry. Compared with my materials science, basic chemistry, physics, inorganic and organic materials, polymer chemistry, polymer physics and so on. It mainly focuses on inorganic nonmetals, such as ceramics and coatings. Belonging to the forefront of material chemistry, I have learned a lot of knowledge, but I am not very precise. However, employment is not ideal. Suitable for people who are interested in chemistry. These things are rather obscure and boring. ()

/blog/static/9431074220088115337932/edit/This blog has many wonderful professional introductions. I suggest you have a look.

What are the chemical properties of materials? What kind of study is suitable for? Are there any special requirements?

I majored in materials. The undergraduate course is very basic, similar to chemistry, but superficial, covering a lot of content but not in depth. I study all kinds of chemistry and physics. Specialized courses are the introduction and preparation methods of polymer materials, metal materials, inorganic nonmetallic materials, nano materials and composite materials, as well as the data analysis methods of experimental results. Personally, I don't recommend this major. We think it's a pity to give up because we have no choice (Heilongjiang University).

Don't learn material chemistry. It's no use. We learned some nanotechnology, but we learned nothing. It's not practical at all It's just a scratch, and graduate students are not that good. If you want to learn chemistry, you'd better learn polymer instrumental analysis (Heilongjiang University).

Originally, material chemistry was a popular major in the world, but it was not very good in China. I heard that Sichuan University is a better major. I am from Normal University, and this major is not ideal. Material chemistry is suitable for people who are very interested in chemistry. The subject of this major is related to the nature of materials in daily life. Study the phenomena of various materials to explain these phenomena. If you are interested in this major, you'd better go to another school, which is not ideal.