1. Drawings of splicing wooden strips together with glue and sticking them on ship ribs.
2. Trim and shape the ship's ribs according to the drawings.
3. Make an auxiliary tool to locate the rib.
4. Fix the ribs with pins (glue is not allowed).
5. Glue two upper keels, because the keels should conform to the curve of the hull, so just tie them with ropes.
6. Leave it for 24 hours, and then you can remove the rope.
7. It's time to stick it on the upper deck of the ship and stick it with wooden blocks.
8. The upper deck is completely completed.
9. Turn the boat over and stick it to the bottom.
10. This needs patience, because the glue can't continue until it is dry, so only a few pieces of wood can be stuck in a day.
1 1. It's all finished at last, and it's polished with sandpaper.
12. Start manufacturing the superstructure of the ship.
13. The shape of the ship has come out, and this is the bow.
14. This is the stern.
15. Continue to add facilities.
16. This is the cabin where all kinds of goods are loaded.
17. Stick waterproof strips on the engine room.
18. Cover the deck.
19. Install the mast.
20. The stern is finished.
2 1. Behind it is the captain's cabin and wooden shed.
22. It will be finished soon.
23. In order to make a sail, I found a piece of white cloth from my mother and sewed it all by hand.
24. Tie the batten to the boat.
25. Install it on the mast of the ship, and then tie a rope to control the sail.
26. it's done.