2
? Cut the wall of the cup with scissors. Don't cut it all, leave the bottom of the cup.
three
? It's like this when you cut it all.
four
? Then cut the paper-cut head into a triangle-like shape.
five
? It's like this after cutting.
six
? Then press the paper cup down.
seven
? Then roll each piece of paper slightly inward by hand.
? After each roll, it is like this lotus shape.
? Then take another paper cup and cut off the bottom.
Stick on double-sided adhesive tape.
? Then stick a piece of paper in another cup to the bottom of the cup with double-sided tape.
? After all, it is drum-shaped.
? Then cut a piece of paper on the cup cut off at the bottom of the cup.
? And then at? Just stick the double-sided tape on the paper covered with paper.
? Then stick the paper just cut on the double-sided tape, which is more beautiful.
? The whole lantern is almost formed, and then press the whole lantern down slightly to make the shape of the lantern more prominent.
? Then poke a hole in the top and bottom of the lantern, which is the bottom of the cup.
Question 2: What paper is used for paper cups? The base paper (whiteboard) made of chemical wood pulp can also be divided into single-sided PE coated paper and double-sided PE coated paper.
Question 3: How to make ps 1 paper cups? Execute the file-new command in Photoshop CS6 menu bar or press Ctrl+N to open the new dialog box, and set the file width to 18cm, the height to 13.5cm, and the resolution to 65438.
2. Set the foreground color to blue, press Alt+Delete to fill in the foreground color, execute Filter-Rendering-Lighting Effect in the menu bar, open the dialog box of lighting effect, and set parameters here.
3. Click the "OK" button after setting.
4. Click the "New Layer" button on the Photoshop CS6 layer panel to create a new "layer 1", set the foreground color to white, select "Ellipsis Tool" in the toolbox, and draw a white ellipse in the file.
5. Use the rectangle tool to draw a white rectangle.
6. Press Ctrl+T to bring up the transformation box. Hold down Ctrl and drag the above two control points outward respectively to produce perspective effect.
7. Create a new "Layer 2" and use the Ellipse Tool to draw a white ellipse in the image.
8. Select the gradient tool in PhotoshopCS6 toolbox, click the color gradient bar, open the color editor, set the color to "gray, white and gray" from left to right, and click "OK".
9. Hold down the Ctrl key and click the thumbnail of Layer 2 to bring up the selection of Layer 2 image, select the gradient tool, set the gradient style to linear gradient, and then drag the mouse from left to right of the selection to fill the gradient.
10. Select "Layer 1", hold down the Ctrl key and click the thumbnail of "Layer 1" to bring up the selection of "Layer 1" picture, select "Gradient Tool" in Photoshop CS6 toolbox, set the gradient style to "Linear Gradient", and drag the mouse from right to left to fill it.
1 1. Select Layer 1 and Layer 2, and press Ctrl+E to merge the selected layers into a Layer 2.
12. Select "Move Tool" in the toolbox, hold down the Alt key and drag the image to the right, and the system will automatically copy a copy of a layer.
13. press Ctrl+O to open the file material "logo design" material.
14. Select "Move Tool", drag the image in the material to the newly created file to get a text layer, press Ctrl+T to call up the transformation box, reduce the image, then copy the text layer into two parts, and then drag the copied image to the right.
19. Select the gradient tool, set the gradient style as linear gradient and the gradient type as black to white, and drag the mouse from bottom to top to fill the gradient in the page.
20. After adjusting the corresponding opacity, copy and pour the cup down, execute the command of Edit-Transform-Vertical Flip, flip the image vertically, press Ctrl+T to bring up the transformation box, and press Ctrl to drag the control point for distortion transformation. Gong 2 1. Press Enter to confirm the manipulation, make the projection effect of the inverted cup in the same way as the reflection of the vertical cup, and finally enter other words at the bottom of the page.
Question 4: How to make paper cups is unclear. The specific style and operation steps can be searched on Baidu.
Question 5: How to make beautiful paper cups? My school is also a key middle school in Jiangxi. I am a sophomore and sleep for five hours every day. I have to make up for my poor math foundation now, and I need 20 minutes to do the problems that others have done in 2 minutes. That's how I persisted. Mathematics used to be 30, but now it is 70. Although it is still poor, it has already worked! As long as you can persist, one day you will suddenly find that, alas, you can do all these problems. Senior three, the mentality problem is the most important! What we fight for is not study, but mood! These days, the top students in any province don't usually get top grades, but when it comes to the college entrance examination, others are anxious, panicked and confused, and they all come down, and several model exams are worse every time. Her mentality helped her, and finally she got the first place in the exam. Do not compete with the world, do not compare with others. Compared with yourself, it is progress, it is good! What do you care about others? ! When you are the first in your class, there is the whole school, the whole province and the whole country. Can you compete? No one is better than anyone! Only oneself is the real opponent. Better than yourself again and again, updating yourself again and again, such progress has long surpassed the limited ranking. In the third year of high school, the mentality becomes a problem. When it comes to work, do we have to be jealous of others? Since I can get one, and it's not bad, I smile to myself and say I'm fine. I worked hard for so long to get into a good university. I am great. But what are you still doing? At most, it is called progress; At worst, this is called walking into a dead end. Learning is not satisfied, but it is definitely not blind dissatisfaction! I am a sophomore, and our winter vacation is only 12 days. Do the problem! Do it! It's been a year, ten years, and I don't believe it! Don't think about those things! This was the only one last year!
Question 6: How do three paper cups make a handmade "paper cup glass"? Drill a small hole at the bottom of the paper cup every 5mm with a sewing needle, so that the bottom of the cup forms a evenly distributed hole network, and a pair of small hole paper cup glasses is made. Its principle is actually pinhole imaging. Cover the paper cup glasses on your eyes, and adjust the distance from the bottom of the cup to your eyes properly, so that the image formed by the object through the pinhole falls on the retina, and you can see the distant object clearly. Because there are many small holes in the bottom of the cup, the brightness of the object image is also large enough.
Question 7: How to make disposable paper cups into blooming sunflowers? The specific steps are as follows:
1. Some paper cups.
2. Cut off the upper part from the middle and cut out the canine tooth shape with scissors.
3. Turn the sharp corner of the paper cup outwards with a pencil.
4. Two paper cups are stacked together. Color.
5. it's done.
Question 8: What kind of simple handmade paper cups can be used as decorative flowers? Collect more cups, cut them out with scissors, the petals are rhombic, and then stick them together. Make a few more and you can put them at will.
Question 9: What kind of handmade paper cup small desk lamp can be made from paper cups?
Required materials: paper cups, used pens, beverage covers, glue guns, scissors, cotton cloth, lace and white latex.
Specific steps:
According to the preparation materials, paper cups, drink lids, used pens, cotton cloth and lace.
Wrap the paper cup in cloth and cut out a rectangle of suitable length.
Glue the cotton cloth to the paper cup with white latex, trim the upper and lower ends of the paper cup neatly, then coat the upper and lower parts with white latex and attach lace to cover the seams of the cotton cloth.
Because the white drink is covered with logo pattern, it is covered with acrylic pigment of the same color and painted layer by layer when coloring.
Cut off the tip of the waste pen with scissors and take off the red cap at the back.
The glue gun is heated, and the upper and lower ends of the pen are glued to the cup and bottle cap respectively.
The paper cup turned into a beautiful little desk lamp.
Question 10: What are disposable paper cups made of? Of course, it's still paper, but it's a special kind of paper, called coated paper, which can be waterproof, bonded with a paper cup forming machine, and molded with a cup bottom at a time. This kind of paper is easy to degrade, does not pollute the environment and is more environmentally friendly. Unlike plastic cups, it's not environmentally friendly. Therefore, many companies print company logos and advertising information on the surface of paper cups as a simple and affordable way of publicity.