If the font is newly installed, Founder Tengfei must reinstall it to use the new font! ! !

The following are some official explanations of Founder, and the font is the most elegant ~ ~ ~

========================================

Before installing Tengfei 4. 1, be sure to confirm the fonts and quantity purchased by users and how to install and set them.

It is best to restart your computer before running the Fit installer. Do not start any other applications and open any unnecessary windows, including antivirus software, before running the installer.

The following figure is the interface of Tengfei installation CD player, from which you can select and run Tengfei installation program.

1. If the user has purchased GBK font output from the backend.

= firstly, install Lanting GBK3.0 1 display font (including 9 GBK characters, see page 1 1 in the Fit 4.0 manual) on the FIT CD.

= Install the take-off main program.

= Configure appropriate fonts and basic parameters.

Note: Lanting GB3.0 display font does not need to be installed.

2. If the user does not purchase the GBK font output by the back end.

= First install Lanting GBK 3.05438+0 display font on Fit CD.

= Install Lanting GB3.0 display font on Fit CD.

= Install the take-off main program.

= Configure appropriate fonts and basic parameters.

3. If the user doesn't buy the GBK font output by the back end, but wants to display it with GBK characters.

= First install Lanting GBK3.0 1 display font (including 9 GBK characters) on the Fit CD.

= Install a separately purchased GBK Lanting font (which will overwrite the installed 9 characters)/or install Book Version 9.0 (which will automatically install GBK Lanting font).

= Install the take-off main program.

= Configure appropriate fonts and basic parameters.

4. From the lower version (version 3. X) to fit 4. 1.

= Uninstall the original lower version of Fit program first.

= Manually delete Lanting fonts installed in the lower version of Fit (starting with FZ and E-)

= After restarting the computer, install Tengfei 4. 1 as described above.

Note: the Fit 4. 1 installation disk will provide a "Fit empty program" to help uninstall the lower version of Fit fonts.

Installation precautions of Tengfei 4. 1

1, the installation sequence must not be wrong! Before installing the fit main program, the display font must be installed.

2. If you are prompted to restart the computer during installation, you must restart it and never be lazy! It is recommended to restart the computer after installing the font library, and then install the Tengfei main program.

Font setting of Tengfei 4. 1

Select file menu = "setting options =" font settings without opening any suitable files:

The first thing I saw was the soaring font setting window (below):

Note: Do not use the Install All or Do Not Install buttons.

On the Founder Chinese page, set relevant fonts as needed.

Front-end installation refers to the font that will be displayed in the font number list of Fit group edition. It is necessary to delete the font library that has not been purchased according to the setting of the number of fonts purchased by users.

Back-end download means that Tengfei directly contains front-end display characters when distributing PS files to replace back-end fonts. You can choose this method for fonts that are not purchased from back-end or third-party manufacturers. However, the accuracy of downloaded fonts may be poor.

Note: The downloaded font must have a front-end display font installed.

At present, there are 52/64/88/ 106 characters in Fangzheng Lanting, but the characters such as Beibei and Jinli listed on the Founder Chinese page are not in the 106 font. Please delete them. Please choose other fonts according to the user's purchase.

It is not recommended to install any fonts listed in System English. If you choose to install, you must set the use of system characters in the reset font on the back-end NTRIP.

The fonts listed in "System Chinese" are Lanting fonts installed on this machine. If the backend does not buy GBK fonts, it is recommended to remove all GBK fonts; Or choose to install or download (GBK display font must be installed). It is also suggested to delete all GBK fonts purchased by the backend and use "Founder Chinese" as the font used in the unique font list.

Back-end Settings: used to control how fonts are handled during back-end typesetting.

First, you need to choose whether GBK fonts are purchased in the background. If installation is set, Tengfei will automatically map "Founder Chinese" or "GBK word" in the font list to GBK typesetting. If it is not installed, Tengfei will map the word "Founder Chinese" in the font list to the previous 748/GB typesetting font library, and the word GBK in the font list will be typeset incorrectly.

If GBK font is not installed in the back end, you need to choose which 748-code typesetting font to buy in the back end. It is recommended to select "Prompt back-end word leakage". When generating PS files, Tengfei will give an error prompt for fonts that are not listed in the back-end typesetting font library.

========================================

In addition:

Send you a question and answer. The content about Tengfei 3. 1 is not out of date, because the biggest upgrade of Tengfei 4 only supports win2000, and everything else is similar!

========================================

Founder Tengfei typesetting system is an object-oriented professional color typesetting software. Chinese typesetting technology is at the leading level in the world, with powerful functions, integrating text typesetting, graphic design and image processing. The input and output are standardized, the system is stable, and the unique soft plug-in system is convenient for personalized prepress application. Tengfei is widely used in newspapers, publishing houses, magazines, printing houses and other professional publishing fields, and is an ideal product to realize the integrated typesetting of Chinese color.

The following are common problems in the use of Tengfei. This paper has compiled some official questions and answers, hoping to help users in need. If you encounter other problems in the process of using Founder series publishing software, you can get support from Founder Online:

Part I: Fit installation and problems

Q: The operating environment of Founder Fit 4.0.

A: The running environment of Founder Fit 4.0 is WINDOWS 98/2000/XP. It is recommended to use WINDOWS 2000 PROFESSIONAL and WINDOWS XP ROFESSIONAL, and try not to use WINDOWS 2000 SERVICE and WINDOWS XP HOME (Home Edition).

The second part: the function and operation of fit.

Q: What's wrong with the soaring pdf plug-in?

A: At present, the PDF files generated by the soaring PDF plug-in have no problem in opening on acrobat4, but there may be problems in opening on acrobat5.

Therefore, users are advised to use acrobat4 to open the PDF file generated by the Fit PDF plug-in.

In addition, a new PDF plug-in version will be released after 2003 10, which will solve this problem.

Q: can Fit 3. 1/4.0 be put into a PDF file?

A: Tengfei can't be directly put into a PDF file. You can save PDF files as EPS or PS files through ADOBE ACROBAT software, and arrange them in the soaring layout.

Q: When users input English on the fly, they find that the distance between the single quotation mark and the last letter is very large, and the same problem occurs when changing other fonts.

A: This problem does exist now. This problem has been corrected in Tengfei version 4. 1. Now the solution is to use the "T" tool to blacken the text, and select "Half-width to Full-width" in the "Code Conversion" under the "Text" menu.

Q: When Tengfei 3. 1 is discharged into the text entered in the book version, the line spacing between paragraphs automatically increases. How to solve this problem?

A: You can set the "Paragraph Spacing" in Paragraph Format under the Format menu to "0".

Q: Tengfei 3. 1, when the characters in the layout are covered with green shading on the white edge of black characters, the output result is that there is also a layer of green net on the characters.

A: The color before the word was changed from black 100 to black 99.

Q: When fitting 3.1is assembled, the lace is displayed as Chinese characters.

Answer: Delete the GBK_S file in the matching program directory in the machine where the error is matched.

Or copy the GBK_S file from the normally displayed machine back to the machine and restart it.

Q: Fitting 4. 1 display scale and actual display.

A: There is a setting of "screen physical size" in the environment setting of the setting options of Fit 4. 1, which will also affect the display effect. The same is true for 100% display. The smaller the definition of screen physical size, the larger the display content.

Q: The baselines of Chinese and English are different.

A: It can be adjusted through the baseline definition.

Q: Why can't we fine-tune the line spacing in Tengfei typesetting? For example, there is almost no difference between the line spacing of 0.5 mm and the line spacing of 0.2 mm. ..

Answer: Select the text to be fine-tuned, and then remove the check mark before the command "Alignment and Typesetting" under the Format menu.

Q: When typesetting with Tengfei software, the spacing between paragraphs in the article is relatively large.

A: Close the current sample file. When the fly-off window is grayed out, choose the Paragraph Format command under the Format menu and change the paragraph spacing value to 0.

Q: I made a book with Fit 3.0 in the past two weeks, involving a lot of decimal points. Because this character is not provided in Fit, the last two digits of the price (such as 12.80) are wrapped.

Answer: The decimal point is shift+4 of the "mathematical symbol" in the dynamic keyboard.

Q: How does the Founder Fit 4.0 prompt line appear at the top?

Answer: Double-click the prompt line to set "At the top".

Q: The prefix and suffix of the page number of Tengfei 4.0 are not aligned in the odd and even numbers of the page number.

Answer: Select "Multi-digit" in "Special Number Type" of "Page Number Type"

Q: Adjusting column width doesn't work in table operation.

A: Adjusting the column width is effective when arranged vertically.

Q: How to add a few more lines to the table made by Fit 4.0?

A: Black a row or column, select Copy, and then select a cell. After selecting Paste, the Copy Row and Column dialog box will appear, and you can follow the prompts.

Q: When typesetting with Tengfei 3. 1, how do you divide text blocks into columns with different widths?

Answer: Put the mouse on the column line, hold down the Shift key on the keyboard, and then drag the mouse to change the columns with equal width into columns with unequal width.

Q: How to make Tengfei 3. 1 automatically use the default layout when creating new files, so as to avoid setting the layout every time a new file is created?

A: In the environment settings under the file menu, cancel the option "Set layout parameters when creating".

Q: When Tengfei 3. 1 is discharged into the text entered in the book version, the line spacing between paragraphs automatically increases. How to solve this problem?

Answer: Paragraph Spacing in Paragraph Format under the Format menu can be set to "0".

Q: How does Fit 4.0 realize word segmentation?

A: Define the text as a clipping path, and then block merge with the graphics.

Q: Add pictures to Tengfei 3. 1 to make the background of the pictures transparent.

Answer: To save a picture as a bitmap when processing it, you can select the transparent option in the picture parameters of FIT.

Q: How does Tengfei 4.0 modify Pinyin?

Answer: first move the cursor to the text to be modified, use ctrl+ RIGHT ARROW key, and then press TAB to move the cursor to the Pinyin part, and you can modify it.

Q: In Tengfei 3. 1, a text block is divided into columns. During the modification, a blank text line appeared under the title, so you can't type.

Answer: Choose two commands: grab whole words and typesetting, and then fine-tune the size of the title box.

Q: Why can't I fine-tune the line spacing in the typesetting process of Tengfei 4.0? For example, there is almost no difference between the line spacing of 0.5 mm and the line spacing of 0.2 mm. ..

A: Select the text to be fine-tuned, and then under the Format menu, remove the check mark in front of the "Alignment and Typesetting" command.

Q: How to emphasize the number of Fit 4.0? Perspective function

A: Use "extended characters"; Need to select "perspective"

Q: How to make cross-page titles and pictures in Tengfei?

A: You can create a two-page file separately and set it as "two-page display". Don't select "Start page is right page", so you can make titles across pages in the layout, and select "Spelling Page Output" when Tengfei generates PS files.

Q: How can Tengfei 3.x typesetting format be used in other documents?

A: Under the Format menu, there is a "Define Typesetting Format" to save. You can use the copy in another fit file, or you can use the original typesetting format on this file.

Q: How to fill in the table of Tengfei 3 1 without line spacing? Leave no line spacing at the top and bottom of the table.

Answer: Select all table items, and there is "Text Border Blank" under the "Typesetting Format" menu. Just set the top, bottom, left and right spaces of the text border blank to 0.

Q: Can you divide dozens of consecutive text blocks into several blocks, that is, 1, with 2,3 pages as a block and 4,5,6 pages as a block?

A: If your version is 4, you can also use the "section" under the "Format" menu (its function is similar to the "other side" annotation in the book version).

Q: Tengfei 3. 1 voted for three people, and the results were 12. The voting result should output 3 votes, 34 votes and 9 votes. First person 12 votes, two "positive" words, two votes (three "positive" less). How to typeset? I know that characters can be used in the version of the book, but how to do it in Tengfei? There are also typos in primary school papers.

A: There are several ways to treat different characters: 1, complement; 2. If you can disassemble the strokes, you can convert the words into curves in Tengfei and remove the unnecessary parts (remember to replace the straight lines with blank lines). This method is similar to the word filling process; 3. If it can't be disassembled, you can use graphics to cut the text, draw a graphic to wrap the needed part, then define the graphic as the cutting path, and then merge it with the text (similar to covering the unnecessary part with a white background).

Q: How does Fit 4.0 get into the circle 1 1? Is there a function of "the other side"

A: Use extended characters; Use the Format menu with Sections.

The third part: advanced operation and parameter setting of take-off.

Q: How to modify the entry separator of FIT?

A: After Fit is installed, the default entry delimiter is 0x AAAA 8. But there are usually users who don't want to use this gasket. If necessary, you can open the fit.ini file, find TABLESEP = = under Founder and fill in the specified separator after the equal sign. For example, the space of the whole corner is tablestep = 0xa1a10a1.

Q: Do I need to restart Tengfei after modifying the fit.ini file?

A: After modifying fit.ini, you must restart Tengfei. It is recommended that ordinary users do not modify fit. INI file. Whatever.

Q: Why Fit 4? 0, enter the font number in the font number option, such as 5H or 5FZHT is invalid. It is valid in version 3. 1

Answer: Please check the userfont.ini in the fit directory, which records the cross-reference relationship of fonts and can be modified.

Q: The compressed TIF black-and-white binary image is automatically included, which causes the file to be too large. How to solve it?

A: You can set not to automatically include black and white binary images by modifying FIT.INI. By writing in Fit.ini:

[image include]IsIncludeBitmapTiff = 0

Note: After setting the black-and-white binary image not to be included automatically, if the image color is set in the image parameters, the color will turn black after allocation.

Isncludebitmaptiff = 1 or without this field, the black-and-white binary image will be automatically included as in the original case.

The default state after Fit installation is "automatically include compressed black and white binary images".

Q: Editing System+Fit 4.0 Online Edition. How FIT settings automatically save time.

Q: In the Fit editing interface, modify the Fit automatic saving time: modify CHB. INI file in the FIT directory.

Q: Tengfei 3. 1 automatically join the ranks. Is it okay to use paragraph breaks in addition to the default comments? What is the code when installing?

Q: In fit.ini, there is table sep = 0x AAAA 8, which defines the table separator and can be modified. For the internal code of the table pad to be defined, you can enter this character in Tengfei. After blackening, the internal code of this character can be displayed in the status bar of soaring. But not all characters can define table separators.

Q: I use the second version of Tengfei 3. 1. When I am editing, I just need to use the path in photoshop to import pictures, which is the clipping path I use. The purpose is to make the unnecessary parts of the picture transparent and save them in tif format. However, it will automatically exit, as long as it tunes to or sees the preview.

A: The following versions of Tengfei 3. 12 do not support the TIFF image format with clipping path generated by photoshop6.0. Please use photoshop5.02 or Fit 4.0.

Q: In the self-help tutorial of Tengfei, it is said that you should choose "turn to 748 yards" when using Founder RIP. However, I also used Founder RIP in several hairstyles and didn't change it to "size 748". Why did I get a haircut?

Answer: Founder RIP includes PSP3 1, PSPPRO and PSPNT. In PSPPRO and PSPNT, 748 and GB characters have been combined, while PSP3 1 has only 748 characters, so there is an option of "PSP3 1 grid interpreter" in the environment settings of Fit.

Q: What is the role of always overprinting black and maintaining OPI links?

Answer: ① Overprinting the black plate means pressing the black plate on other colors without hollowing out. This routine arrangement is the default;

②OPI is generally only used by typesetting software developed by foreigners. Founder series software doesn't need this function, so don't choose it because it is of no value to other users.

Q: Tengfei cannot rotate the inserted S2, S72 and PS2. Is there any way to achieve rotation?

Answer: The solution is to insert this file, then generate a PES file through partial distribution, and then insert the EPS file into the layout for rotation.

Q: Tengfei 3. 1 Unable to recognize the graphic square and black dihedral angle (F2) defined in the book version.

A: The test did. Tengfei 4 can support F2 marked by WT.

Q: Fit 3. 1 is inserted into the form of WORD, but the form will not come out when it is output on RIP.

A: This is because the WORD table has been resized in fit. If you want to resize the table directly in fit, you need to use the Select tool to select the table, and then select Partial Distribution under the File menu to generate an EPS file, insert it into the fit layout, and then resize the table.

Q: FIT3. 1 After installing OLE patch, the table margins will be lost when outputting.

A: When inserting a WORD document, it is recommended to use direct copy instead of insert object.

Q: There is a table copied from WORD in Tengfei 3. 1, and the punctuation in the table becomes negative when it is output.

A: If this problem occurs, please log in and download the OLE program, and install it according to the readme file to solve this problem.

Q: Can't fit the 4.0 tick chart?

Answer: If you want to hook the edge of a graph during takeoff, it must be a graph in TIF or EPS format.

Part IV: Font part.

Q: The font imitating Song _GB23 12 was used in the second edition of Fit 4.0, and the missing font was replaced in RIP output.

Answer: Tengfei typesetting should try not to use fonts such as bold, song style, imitation song _GB23 12 and italic _GB23 12 that come with WINDOWS system. There won't be this problem if you use a square font.

Q: How does 4.0 (second edition) realize the classification display of Chinese fonts in the font list according to traditional, simplified and GBK?

A: First, install programs without GB or GBK fonts, install Fit programs, and run Fit. There is no GB at this time. Then, install the GB simplified version and enter the Fit configuration font, so that the simplified version is together. After setting, install the traditional version, and then enter Fit to configure the font, so that the traditional version is together. Then, install GBK, and then enter the appropriate configuration font, so that GBK will be together. This method is applicable to all versions of Fit.

Q: Founder Lanting font library has been installed on the computer. Founder fonts can also be used in word software, but these font names are not visible in Tengfei.

Q: Check "Configure Fit Font" in the "Environment Settings" under the "File" menu of Fit, and select the corresponding font name in the "System Chinese" list in the dialog box. After confirmation, you can use the font normally.

Q: Why can't other fonts (such as Yao Ti, Xing Kai, etc.)? ) Can it be displayed correctly when Tengfei 4.0 comes with its own founder font, but it is replaced by Shusong (founder) font? Have you made sure that fonts have been installed on the back-end equipment (imagesetter, printer)? And the 3. 1 version of Fit can be released at any time.

A: You should pay attention to:

1. Don't download Founder Chinese fonts in Tengfei font settings;

2. If the GBK font is not installed in the back-end distribution software, you should select "Not Installed" GBK font in "Back-end Settings" under "Font Settings" of Tengfei.

Q: Can I use Hanyi fonts in Tengfei 3. 1/4.0 software?

Answer: As long as the TRUETYOE font of PC Hanyi font is installed in the system, you can use it by selecting the corresponding Hanyi font in Fit Font Settings-System Chinese Options.

Q: When Tengfei 4.0 operates the form, the font in the form is selected in the form state and cannot be blacked out. Why?

A: No, but it can be bold in the variant word of CTRL+H. Tengfei 4. 1 has been changed.

Q: The Chinese characters in Tengfei 3. 1 are black characters with white edges and green shading, and there is a layer of green net on the characters when they are output.

Q: Just change the color before the word from black 100 to black 99.

Q: When fitting 3.1is assembled, the lace is displayed as Chinese characters.

Answer: Delete the GBK_S file in the matching program directory in the machine where the error is matched. Supplement to other processing schemes: copy the GBK_S file back to the normally displayed machine and restart it.

Q: When the complement is inserted in take-off, the internal code of the complement is FEFE. When Tengfei generates PS file, it will prompt "Some codewords cannot be converted into Founder 748 code: 0xfefe:".

Answer: FEFE code is used for soaring, and users are not advised to fill in words at this code position when filling in words.

Q: There is a paragraph that defines the font of "Baosong (Founder)", but several words in the middle have become traditional Chinese characters.

A: This situation is generally because there is a GBK character in this paragraph, and it is defined as the 748 font of "Baosong (Founder)", so it will happen that the characters after GBK become traditional Chinese characters, that is, Samsonite. The solution to this problem is to blacken the word GBK, define it as "Founder Newspaper Song _GBK", and download this font.

Q: Some symbols of Founder Dynamic Keyboard will not be displayed in FIT3. 14 typesetting.

A: When using Founder Dynamic Keyboard, please don't use Lanting characters to define fonts. Some symbols cannot be displayed (for example, some symbols in other symbol tables). Please use 748 words to define the font.

Part V: Problems encountered in scheduling and printing.

Q: The PS file generated by Tengfei Fapai has a lot of information.

Answer: The reason for this question is: 1. Because the font information is downloaded in the font settings. 2. Because the environment settings contain picture information.

Q: The contents of the FIT4.0 file are pasted from WORD through dynamic paste. When pasting, the selection tool is selected, thus retaining the attributes of the text in WORD. When generating PS file, I report "Unable to start print job". But it is normal when generating PS files on another computer.

Answer: Please check whether there is a print driver for "PS file" in the printer folder. If it doesn't exist and there is OLE content in the takeoff, the error you described will be reported when generating the PS file. If this problem occurs, please uninstall and reinstall Tengfei.

Q: In Tengfei, some dispatchers reported that "the printing job could not be started" was wrong.

A: This problem is because the "Ps file" in the "Printers" folder has been deleted. This virtual printer was installed by FIT, so do not delete it. If you delete this printer, you need to uninstall Tengfei and reinstall the program.

Q: Can I use PSP 3. 1 for file distribution of Tengfei 3? x？

Answer: you can output on PSP3 1, but you must do the following: 1, and select "PSP3 1 raster interpreter" in "Environment Settings"; 2. Define and download ANSI and system Chinese fonts.

Q: Tengfei 4.0 generates PS files and outputs them on PSPPRO. Some words are black blocks.

A: Users use Microsoft to spell GBK characters, but they use 748 fonts. At this time, PSPPRO uses 748 font when outputting, so the input GBK characters cannot be output naturally. If you want to use GBK characters, you should blacken the characters, choose GBK fonts, and choose to download the soaring GBK fonts.

Q: PSPPRO outputs the PS file generated by take-off. In Tengfei, the font "Amber (Founder)" is used, but in PSPPRO, the song style is output, and PSPPRO does not report any font errors.

A: The user downloaded Founder Chinese when configuring Tengfei font, so just cancel downloading Founder Chinese.

Part VI: Serious mistakes and solutions.

Q: Tengfei often reports illegal operations when saving, so it can't be saved.

Answer: It may be related to the encryption dog. You can try changing the encryption dog.

Q: Tengfei 3. 1 Save the file before opening it and report "Error in opening the file".

A: The user runs under WIN2000, and Tengfei 3. 1 does not support the operating system of WIN2000.

Q: FIT v4.0 can't open PUB files. Error: An unexpected error occurred inside the OOSC module.

Answer: You must have administrator permission to log in to open the PUB file normally.

Q: Tengfei 3. 12 often crashes when drawing rounded rectangles or making cross-border characters on some machines. This is the compatibility of Tengfei 3. 1 with the graphics card. At present, Nvidia TNT\TNT2\GEFORCE 2 and other graphics cards have problems.

A: It is recommended to download the relevant drivers from http://SERVICE.FOUNDER.COM.CN data of Founder Service website.

Q: Multiply the PSP3. 1 output Tengfei 3. 1X PS file by "Critical Error (0xfe04): Error reading the file.

A: In the soaring environment setting, I chose to include picture data, download fonts, and also chose PSP3 1 grid interpreter. Later, I found that a picture was copied and pasted into the layout of Tengfei, so I could delete this picture.

The seventh part: users' opinions and suggestions on take-off.

Q: The page number function of Fit 4.0 is suggested to be improved as follows: any part of the page can specify the starting page number; For example, a book with 100 page, the first 10 page is the table of contents, and the page number is 1- 10 page; The back part is the text with the page number 1-90; Wait;

A: It can be achieved through the second page number, but it is more troublesome. According to what you said, if you add two page numbers in the same position, they are all 1- 100 pages. Then, 1- 10 uses the second page number. After 1 1 page, you choose not to display the first page number. The problem with this is that you have to set up every page.

========================================

I hope it helps you!

Despise "knowing" and cover up the liar 55438+0470.