Current location - Training Enrollment Network - Mathematics courses - How to Make Handwritten Books Simple and Beautiful
How to Make Handwritten Books Simple and Beautiful
Make an ordinary manual book.

0 1

Pile loose-leaf pages together. These papers are used as the inner pages of notebooks. Use white paper or horizontal paper-it depends on what you need to do with this notebook. Fold these papers and make sure that all sides are aligned.

Any size of paper will do. However, for a person who has never made a notebook, it is estimated that it is still necessary to use simple paper bound in rows. This kind of paper is generally stationery (203x279mm). This kind of paper is the most convenient to use because it already has three binding holes.

White paper is often used in art, because it is best to draw, color or create other works of art on blank A4 paper. Paper with dark horizontal lines is usually used for keeping a diary, while paper with light horizontal lines is usually used for writing notes, such as mathematical formulas. So it depends on their actual use.

02

Put a piece of art paper on this pile of paper. Put other art papers on the bottom of a sheet piling. This kind of art paper should be as big as the inside page. Make sure all edges are aligned.

03

Take out your three-hole punch. If you only have a single-hole punch, you can also use this. Punch holes in your paper stack to make sure that the edges of all the papers are perfectly aligned. Push the paper into the groove of the punch as far as possible until it can't be pushed. At this time, the edge of the paper can be pushed to the back of the punch. The hole should be 7 to10cm away from the edge. Press the punch to punch holes.

If you use a single hole punch, measure and mark the place where the hole should be punched with a ruler. This hole should divide the edge of this stack of paper into three parts. Let the hole be about 3 cm away from the upper and lower edges of the paper.

04

Pass the ribbon through this hole and tie it. You can do this in a variety of ways. Pass the ribbon through the holes at both ends, and then tie the ribbon above or after passing through the middle hole; Cut the ribbon into three small sections, and tie a ribbon between every two holes; Or you can wear it several times between several holes and finally tie it together.