discuss

age

ask

* * * (enterprise abbreviation) -C-AQB-JL00 1

Discussion on the name of safety supervisor meeting

At the meeting in the afternoon.

Main support

commemorate

record

Seat staff

Discussion content:

The meeting was presided over by * * * *, and new arrangements were made according to the general manager's spirit of convening cadres and some phenomena found in recent supervision and inspection work.

1, safety supervision and inspection has increased by two main safety personnel every month from the original one, and the main body is responsible for issuing rectification instructions according to the inspection situation; At the end of each month, make a safety case and report the recent safety work.

2, safety inspection system on-site inspectors, security officers, administrators, etc. Inspection should be carried out according to each part of the system and the frequency of registration inspection is low. According to the system, it will be punished in accordance with relevant regulations; The records of the thin oil station of the rolling mill shall be checked and registered by the clerk.

3. Vehicle management in the factory At present, the number of vehicles in our company is more than that of forklifts, transport vehicles, bulldozers, excavators and commercial vehicles. It is necessary to strengthen the supervision and management of on-site personnel, especially construction vehicles to explore the construction site, and to stop or notify the security department to deal with violations.

4. Set up regional safety responsibility, train special steel before special work, and set up part-time safety responsibility in each region when high-speed wire rod is put into production; Safety operation rules for each post should be compiled, and employees should be trained in needles.

5. Use of working ticket At present, my aerial work, hot work and confined space work are different from the use of working ticket. Employees at all levels sign and tell them to check their preventive measures, and arrange employees to check and help reflect the importance of safety. Do not apply for a working ticket, according to the provisions of punishment. If illegal operation is found, the punishment will be doubled.

6. The high-speed wall line for safety label production of this project has been completed and put into use as soon as possible, especially the gas station, power distribution room, operation desk and other parts have a warning effect on test operators and outside operators; Safety labels of special steel departments shall be collected; The marking of the new factory building must be done according to the family regulations.

7. Smoking is strictly prohibited. Now, every member who has arranged the inspection will be arranged to conduct a surprise inspection on the spot. If it is found that this member smokes in violation of the regulations, his family members shall notify the construction team including his employees.

8. Lightning protection self-test. Each factory uses meter gas station and power distribution room to do self-inspection to see if it meets the requirements; Research on lightning protection and electrostatic equipment or lines in current unit; Install surge devices in dangerous parts of gas stations to prevent damage; Should I install them?

9. Employees who want to clean the heatstroke prevention and cooling ditches in summer will increase measures such as cooling water; Check the department equipment; Check and repair the air conditioner with high driving temperature, and urge the new car to clean the ditch and workshop top sink before the rainy season, and repair the damaged downpipe. The low-lying temporary lines of each construction team should be cleaned up to prevent accidents.

10, traffic safety projects entered the department one after another. New employees emphasize traffic safety, and now they should form the habit of giving up.

Report to the general manager of * * *

symbol

Security Commissioner

Send it to every security administrator every month.