In normal study, work and life, we will encounter some unexpected events. In order to minimize the adverse effects caused by accidents, it is often necessary to prepare emergency plans in advance according to specific conditions. So how should the emergency plan be compiled properly? The following is my collection of special emergency plans for fire accidents for your reference, hoping to help friends in need.
Special Emergency Plan for Fire Accidents 1 1. Purpose of the drill:
1. In order to test the scientificity and effectiveness of the special emergency plan for fire accidents, improve the self-help ability and fire prevention awareness of all participants in the continuation project when a sudden fire accident comes, minimize the losses caused by the fire, and improve the overall emergency capability and emergency skills of the Eleventh Project Department and its subordinate project departments.
2. Expose the defects of emergency plan through drills and find the shortage of emergency resources (including manpower and equipment, etc.). ).
Second, the practice content:
1, fire alarm is accurate;
2, use dry powder fire extinguisher to put out the initial fire;
3. Evacuation and escape drills;
Third, organization
1, commander in chief:
Be responsible for announcing the start and termination of emergency plans, comprehensively commanding and mobilizing emergency organizations, allocating emergency resources, and organizing and implementing emergency rescue work according to emergency procedures.
Deputy commander:
Assist the commander-in-chief in directing emergency rescue. If the commander-in-chief is absent, the deputy commander-in-chief will be fully responsible for the command of the emergency rescue plan exercise.
2. Emergency rescue team
Be responsible for on-site fire fighting, cooperate with the evacuation team and count the number of people.
3, medical rescue group
Responsible for organizing on-site rescue of the wounded, such as giving first aid to the unconscious people at the scene of the accident until the hospital ambulance arrives.
5. Communication and Coordination Team
After receiving the report, be responsible for the communication in the process of emergency rescue, ensure the smooth communication, be responsible for the coordination among various groups, and contact and coordinate with the relevant institutions of the owner and supervision unit.
6, material support group
Responsible for the supply of emergency materials in case of emergency.
Four. Equipment and materials for emergency drills
1, 5kg 10 dry powder fire extinguisher.
2, special stretcher special stretcher 2 pairs;
3. First aid kit (containing hemostatic bandage, rubber strip, debridement and disinfection alcohol, etc.). );
4. Eight walkie-talkies
5. Escape tools: clean towel (small) 100 towel.
Persons to be identified:
1, 60- 100 people involved in the evacuation;
2. The wounded: 2;
3. Rescuers: 8-10;
Verb (abbreviation of verb) specific requirements
1, the preparation is comprehensive and sufficient, and the pre-education of personnel is in place.
2. All participants in the exercise should be based on their respective units in dressing the. Personnel used on site must wear safety helmets.
Obey the command, don't fight, don't tamper with the facilities in the venue, and pay attention to your own safety.
Six, accident hypothesis:
On the afternoon of 20xx165438+1October 15 12, a fire broke out on the south side of the office building of the eleventh project department of the sixth company of China Railway 22nd Bureau. At this time, the workers are resting in the dormitory after dinner, and the fire is critical. At the same time, the nearby staff dormitory is resting in the dormitory after dinner, and the situation is very critical.
Seven, the exercise process
Scene 1: Worker A in the dormitory (arranged in advance) is the first to find that the switch box is on fire and the corridor is filled with smoke. He shouted loudly and ran to the person in charge's room. The person in charge immediately rushed out of the room and shouted for everyone to evacuate immediately. At the same time, organize personnel to grab the fire extinguisher in the corridor and come to the burning distribution box to extinguish the fire and control the spread of the fire.
Scenario 2: The safety supervisor calls the fire alarm number: 1 19 and asks the project manager.
Scenario 3: The manager of the project department immediately starts the "Special Emergency Plan for Fire Accidents", and the rescue team, material supply team, medical rescue team, material supply team and related personnel immediately rush to the scene of the accident to organize rescue according to the division of responsibilities. Immediately arrange a special car to meet the fire truck at the gate and the main intersection.
Scene 4: The on-site emergency rescue team immediately organized to control the fire, evacuated the crowd as soon as possible, and dialed the emergency number 120.
Scene 5: According to the fire danger at the scene, the rescue team organized all the people involved in the evacuation in the building, covered their nostrils with wet towels and jogged downstairs in an orderly manner. The person in charge of evacuation constantly reminds workers to pay attention to safety and the order of going downstairs. Everyone involved in the evacuation is calm and calm in the face of emergencies, and the evacuation work in times of crisis is orderly and truly fearless.
Scene 6: The medical rescue team carries a stretcher, and with the assistance of the emergency rescue team, the injured person is transferred to a pre-selected well-ventilated temporary first aid point until the hospital ambulance arrives.
Scene 7: Commander-in-Chief, in view of
(1) The field personnel are completely out of danger;
(2) Fire hazard is effectively controlled;
(3) There is no environmental pollution accident around the dormitory building;
(4) The evacuated personnel are in a safe position. Announce: Close the special emergency plan for fire accidents, and the emergency action is over.
Special emergency plan for fire accident 2 1, accident type and risk degree analysis
The coal conveying system of xx Thermal Power Plant has 9 belts (18), * * *1870m. There is a lot of dust and accumulated coal around the belt, which is prone to fire accidents such as spontaneous combustion of accumulated coal in summer and winter. Improper handling is easy to expand the accident, resulting in unit shutdown and even personal injury.
2. Basic principles of emergency response
In accordance with the principle of "safety first, prevention first, comprehensive treatment", adhere to the combination of prevention and rescue, take the prediction and prevention of accidents as the basis, take the rapid and accurate handling of accident process as the core, take the full protection of personal, heating, power grid and equipment safety as the goal, and establish a long-term mechanism for accident management and emergency response, so as to improve the ability of rapid response and emergency response and minimize the losses and impacts caused by accidents.
3. Organization and responsibilities
3. 1 emergency organization system
See figure14-1for the emergency organization system.
3.2 Command Organization and Responsibilities
3.2. 1 Site emergency headquarters
Team leader: factory director
Deputy Director: Deputy Director and Deputy Secretary.
Responsibilities: After the coal belt fire accident, emergency headquarters comprehensively organized the accident emergency work.
Emergency headquarters has an office on site:
Director: Deputy Director
Members: heads of offices
Responsibilities: Responsible for communicating and summarizing information, and reporting to the leaders of emergency headquarters or power plant in time.
3.2.2 Field Equipment Isolation Group
Team leader: Deputy Director of Operation Department
Members: shift supervisor and professional team leaders (unit leaders).
Responsibilities: Be familiar with the contents of the coal belt fire emergency plan and the corresponding related equipment and systems; When the emergency plan is started, quickly and accurately isolate the equipment, system and power supply involved in the coal belt fire accident.
Guided evacuation team
Team leader: Director of Production Equipment Division
Member: professional engineer of production equipment department.
Responsibilities: Be familiar with the contents of "Special Emergency Plan for Coal Belt Fire" and the related roads and surrounding environment of the incident site; After the emergency plan is started, quickly gather at the accident emergency scene headquarters to receive instructions; According to the distribution of personnel at the scene of the accident, open a safe evacuation passage and organize personnel to evacuate to a safe place.
Security team
Team leader: the director in charge of safety management in the production equipment department.
Members: safety supervision of power plant, fire protection specialty and safety supervision of operation department.
Responsibilities: Be familiar with the contents of the coal belt fire emergency plan and the related roads and surrounding environment of the places involved; When the emergency plan is started, quickly assemble to the accident emergency scene headquarters, accept instructions, clear the accident scene passages, set up a warning zone, and prohibit irrelevant personnel from entering the accident scene; Count the number of rescuers entering the accident site, collect the accident site information, identify the possible secondary accident sources at the accident site, and report to the accident emergency site command in time.
3.2.5 On-site rescue team
Team leader: Director of Operation Department
Members: duty supervisor, full-time workers, volunteer firefighters, etc.
Responsibilities: Be familiar with the contents of emergency plan for coal belt fire, rescue methods for various equipment failures, water sources, fire fighting equipment, passages, etc. When the emergency plan is started, quickly assemble to the accident emergency scene headquarters, obey the command, do not act blindly, and carry out rescue in an orderly manner.
3.2.6 Rescue Logistics Support Group
Team leader: director of the office
Members: general manager, monitor of cleaning class, cleaner, typist, etc.
Responsibilities: Be familiar with the contents of emergency plan for coal belt fire and the storage location of emergency spare materials; After the emergency plan is started, quickly assemble to the accident emergency scene headquarters, set up temporary rescue stations, equip emergency vehicles, contact professional rescue resources, and open up a green channel for personnel rescue; Record the instructions and processes issued by the accident emergency site command.
3.2.7 Emergency duty room
The power plant should set up an emergency duty room for coal belt fire accident, and the duty place is the main control room, which is on duty 24 hours a day.
4. Prevention and early warning
4. 1 Hazard monitoring
Strictly implement the fire control management standards of the group company and the fuel professional operating procedures of xx thermal power plant, check and rectify as required, and constantly improve the coal conveying belt management system.
4. 1. 1 Technical management of coal conveying belt operation
(1) Carry out operation management according to the requirements of the operating procedures for normal operation of coal conveying belts.
(2) Establish and improve the coal conveying belt maintenance and inspection system.
(3) Strictly implement the system of regular test and rotation of coal conveying belt, and make records carefully.
(4) Improve the fire alarm system of coal conveying belt, strengthen system maintenance, and ensure the normal operation of the system.
4. 1.2 Operation monitoring of coal conveying belt
(1) Temperature monitoring when the coal conveying belt is running: conduct far-infrared imaging inspection on the coal conveying belt regularly, and focus on monitoring the joints of the coal conveying belt, especially when it is under high temperature and heavy load, and handle the problems in time.
(2) Monitoring of running load of coal conveying belt: Production and operation personnel should strengthen monitoring of coal conveying belt load, and if it exceeds the red line of ammeter control, they should immediately report to the person in charge on duty and take necessary measures.
4. 1.3 The inspection of coal conveying belt shall be carried out regularly.
Regularly measure the temperature of the intermediate joint of the coal conveying belt. To the terminal head of coal conveying belt and coal conveying belt ditch. Tunnels, coal belt wells, coal belt racks and underground coal belt lines should be carefully inspected, and countermeasures should be taken to eliminate defects according to the inspection results.
4. 1.4 Testing and replacement of coal conveying belt
The test items and cycle of coal conveying belt should be carried out according to the items and cycle specified in the Preventive Test Regulations for Electrical Equipment, and problems should be handled or replaced in time when found.
4. 1.5 Matters needing attention in newly installing coal conveying belt
(1) The selection and laying of coal conveying belts in new construction and expansion projects shall be designed in accordance with relevant parts of Code for Fire Protection Design of Thermal Power Plants and Substations CB50229- 1996 and Technical Code for Design of Thermal Power Plants, and the fire prevention measures for coal conveying belts shall be completed in strict accordance with the design requirements.
(2) The construction shall be carried out in strict accordance with the correct design drawings, and the wiring shall be neat. All kinds of coal conveying belts should be arranged in layers according to regulations, and the bending radius of coal conveying belts should meet the requirements, avoiding crossing, and leaving enough pedestrian passages.
(3) When laying the coal conveying belt in the expansion project, we should strengthen the close cooperation with the operating unit, and timely block the coal conveying belt from passing through the holes of the in-service unit and the damaged firewall.
(4) The number of intermediate joints of mooring cables shall be reduced as much as possible. When necessary, the head of coal conveying belt should be manufactured and installed according to the process requirements, and sealed with fire-proof and explosion-proof trough boxes after the quality acceptance.
4.2 Early warning actions
4.2. 1 early warning
Any fire alarm caused by the monitoring device in the coal conveying belt, such as excessive oil temperature, smoke and light, is regarded as the early warning condition of this plan, and the sender shall report to the shift supervisor in time.
Key points of coal belt fire alarm: accident location, accident situation, trapped situation of on-site personnel, name and telephone number of alarm person, etc.
4.2.2 Call the police
When the shift supervisor receives the fire alarm of the coal conveying belt, he shall immediately give a warning of "on-site danger" to relevant disciplines and report to emergency headquarters or the emergency office.
If the accident occurs at night or on a rest day, the shift supervisor should also report to the factory duty room immediately.
Emergency headquarters members who received the alarm at the scene of the accident should immediately rush to the scene of the accident, analyze the accident situation and decide what level of emergency plan to start, and notify all emergency teams to make emergency preparations.
On the night or rest day after receiving the alarm, the personnel on duty in the factory department should immediately call other personnel on duty in the factory and rush to the scene of the accident to cooperate with the shift supervisor for emergency treatment.
5, information reporting procedures
If a coal belt fire accident occurs in a power plant, it must be reported to the xx Municipal Administration of Work Safety or the xx Municipal Bureau of Quality and Technical Supervision according to the relevant national laws and regulations, and the power plant shall report to the above-mentioned departments in time.
The personnel on duty in the emergency duty room shall immediately report to the personnel in emergency headquarters or the emergency office after receiving the report of the coal belt fire accident, and make records.
After receiving the report of the coal belt fire accident, according to the instruction of emergency headquarters, each office should immediately organize relevant personnel to investigate, verify and confirm the reported matters, and report the situation to emergency headquarters in time.
Once an accident report is reported and verified, it should be reported to the Group Company immediately, and the production area and surrounding personnel who may be involved in the accident should be notified urgently, explaining the nature of the accident, the protective measures taken and the evacuation plan.
6. Emergency treatment
6. 1 response classification
According to the controllability, severity and influence scope of fire accidents in coal belt, the emergency response level is divided into I, II, III and IV in principle.
(1) One of the following situations occurs to start the level I response.
More than 30 people were killed (including missing), or the life safety of more than 30 people was endangered, or 100 people were poisoned (seriously injured), or the direct economic loss was more than 65438+ billion yuan, which caused the power generation and heating system of the power plant to be completely paralyzed, exceeding the emergency capacity of the enterprise itself.
(2) When one of the following situations occurs, start the level II response.
Causing death (including missing) of more than 30 people in 10, or endangering the life safety of more than 30 people in/kloc-0, or causing poisoning (serious injury) of more than 50 people in 100, or causing complete shutdown of the power plant, resulting in direct economic loss of more than 50 million yuan 1 000 million yuan, and
(3) When one of the following situations occurs, start the level III response.
Causing death (including disappearance) of more than 3 people 10, or endangering the life safety of more than 30 people 10, or poisoning (serious injury) of more than 30 people and less than 50 people, or causing significant direct economic losses that exceed the enterprise's own emergency capacity.
(4) When a general coal belt fire accident occurs or may occur, start the level IV response.
6.2 Response procedure
The fire accident of coal conveying belt in power plant was rescued by the on-site command, and reported to emergency headquarters, a group company, by fixed telephone, mobile phone and fax. According to the severity of the accident, it is decided to start the corresponding level of response. Make a rescue plan, arrange and contact relevant rescuers to carry safety protection articles (dust, gas masks; Barotropic air respirator; Protective clothing, etc. ) for rescue.
The emergency management organization must have the system diagram of various professional equipment in the power plant and the flow chart of emergency treatment of coal belt fire.
According to the site location and situation, based on the principle of protecting personnel, heating, power grid and equipment, the scope of power outage and steam stop is determined, and measures are taken to cut off the power supply of equipment at the site of coal belt fire accident. When cutting off the power supply, because a small part of the power supply may not be removed, rescuers should keep a certain distance from electrical equipment when entering the explosion area to prevent electric shock.
6.3 Disposal measures
6.3. 1 Accident alarm and preliminary disposal
When the coal belt caught fire, the discoverer should report the accident information to the shift supervisor quickly. The shift supervisor is the commander of the rescue scene. After arriving at the scene, we should quickly grasp the situation that caused the accident, respond quickly, order the volunteer firefighters on duty to enter the wartime state, bring ABC dry powder fire extinguishers to the coal belt at each post, report to the factory leaders, notify the Sixth Fire Brigade and arrange production as planned, and take effective measures to control the expansion of the accident and ensure the safe operation of personnel and equipment.
If the coal belt fire accident can't be controlled, under the unified command of emergency headquarters and Power Plant, immediately report to the relevant departments and personnel of the Group Company. When reporting, explain the accident location, situation, personnel safety, equipment damage and other details, and obey the unified command and dispatch of the group company. When necessary, the headquarters should evacuate the threatened employees, and the evacuation passage is mainly the fire escape in the factory area.
6.3.2 Emergency deployment of coal belt fire accident
Emergency headquarters at the scene of the accident should immediately rush to the scene of the accident after receiving the alarm; Set up obvious signs near the command site, announce the start of special emergency plan for coal belt fire, and organize, direct and coordinate the emergency actions of emergency teams.
After receiving the order to start the emergency plan, all emergency teams should immediately assemble at the scene of the accident and report to emergency headquarters to count the number of people; If conditions permit, personnel should wear obvious identification marks.
After arriving at the scene of the accident, the accident emergency field headquarters will give instructions for evacuation, rescue and transfer of materials according to the damaged equipment, trapped personnel, equipment and materials, and command all emergency teams to act in an organized manner.
The person on duty for a long time is the commander of the fire fighting scene, so he should quickly grasp the fire and decisively command:
(1) Voluntary firemen use fire-fighting equipment to extinguish the fire in different areas and control the fire.
(2) Send someone to rush into the fire escape to rescue the trapped and injured.
(3) Determine whether to start the foam generator to put out the fire in an emergency and implement it.
(4) Evacuate the vehicles parked around the fire site effectively to ensure smooth fire exits.
(5) Be sure to call the police and ask the public security fire brigade and the medical rescue center for help.
(6) Arrange personnel to maintain order at the scene and keep in touch with the factory department.
(7) When extinguishing the fire, pay attention to cut off the relevant power supply, wear a respirator, and it is forbidden to extinguish the fire with water.
If the accident is accompanied by or secondary to personal injury, burning or leakage of dangerous chemicals, the accident emergency site command should start the corresponding special emergency plan in time.
In the event of an accident emergency, according to the degree of the accident and the casualties, timely request the nearby public security or armed police personnel to reinforce, and provide human resources to assist in the implementation of vigilance, evacuation and rescue of trapped people.
In the event of an accident emergency, according to the degree of the accident and the casualties, timely request reinforcements from professional institutions such as fire fighting and medical treatment, provide professional support, and help implement the action.
After the accident is eliminated, the scene of the accident should be isolated and protected immediately, and corresponding safety measures should be taken to ensure the safety of production personnel.
Make a plan to resume production, first gradually restore some undamaged equipment and resume production as soon as possible.
With the normal operation of all major equipment as the end point, after the completion of the coal belt fire emergency task, emergency headquarters issued an order to lift the emergency state.
7. Emergency support
According to the material management regulations of the group company, emergency spare parts can be reserved by means of material sharing, so as to ensure that emergency spare parts can be provided in the shortest time when an accident occurs.
7. 1 Communication and information guarantee
See Appendix A for the interphone channels used in emergency and the telephone numbers of relevant personnel.
7.2 Emergency Team and Equipment Support
The emergency team includes professional and technical personnel, duty personnel, volunteer firefighters and external rescue department personnel. Emergency equipment includes positive pressure air respirator, gas mask, dust mask, walkie-talkie, hose, anti-noise earmuffs, etc.
Special Emergency Plan for Fire Accidents 3 1, Accident Risk Analysis
Possibility, harm degree and influence scope of the accident: For details of the possibility, harm degree and influence scope of the accident, please refer to the Statistical Table of Accident Risk Classification in Buliangou Coal Mine in the comprehensive emergency plan.
2. Basic principles of emergency response
1) adhere to the policy of "putting prevention first and combining prevention with elimination". All units and individuals have the obligation to maintain fire safety, protect fire control facilities, prevent fires and report fire accidents; Any unit has the obligation to participate in organized fire fighting and rescue.
2) Adhere to the principle of combining specialized agencies with employees. The rescue team is responsible for the organization and command of the fire scene and the implementation of fire fighting and rescue. Full-time fire brigade and voluntary fire brigade actively cooperate, and cadres and workers actively participate.
(3) Adhere to the principle of combining peacetime with wartime. In accordance with the procedures, methods and measures specified in this plan, organize and carry out comprehensive actual combat drills on a regular basis to improve emergency response capabilities.
4) Adhere to the principle of unified command. Set up a fire accident emergency rescue headquarters, responsible for mobilizing manpower and material resources to support fire fighting.
5) Adhere to the principle of "saving people first". When someone is threatened by fire, they should be rescued first.
6) Adhere to the principle of "actively rescuing and protecting property". While putting out the fire, quickly organize personnel to evacuate, protect public and private property, and minimize fire losses.
3, emergency organization and responsibilities
3. 1 The emergency organization system is the same as the comprehensive emergency plan.
3.2 Not even ditch coal mine emergency rescue headquarters responsibilities with comprehensive emergency plan.
4. Prevention and early warning
4. 1 Hazard monitoring
4. 1. 1 monitoring method and hazard monitoring method
Make full use of the principle of combining civil air defense, physical defense and technical defense, the safety supervision department organizes various professional departments to conduct regular safety inspections on mine ground safety facilities, and make full use of smoke induction alarm, infrared alarm, video surveillance alarm and other means to monitor.
4.2 Preventive measures
4.2. 1 According to the fire control regulations, the safety supervision department shall organize at least once a month to inspect the key parts of mine ground fire prevention, and the district team shall inspect them once a week, the team shall inspect them once a day, and the post shall be inspected once per shift, and the problems found shall be reported and handled in time.
4.2.2 Regularly check the operation of electrical equipment and add lubricating oil according to regulations to avoid fire caused by friction overheating.
4.2.3 All key fire-fighting parts shall be equipped with sufficient fire-fighting equipment and necessary monitoring facilities according to regulations, and ensure that they are qualified, effective and easy to use.
4.2.4 Conduct fire safety training for employees in key fire prevention positions, so that all trainees can meet the requirements and post personnel can operate in a standardized manner.
4.3 Early warning actions
After receiving the fire accident information, the dispatching room must immediately study and determine the response plan according to the requirements of the emergency plan, and notify the relevant departments to take corresponding actions to prevent the accident from expanding or take measures to prevent the disaster from further expanding.
4.3. 1 Early warning conditions
4.3. 1 The insulated conductor leaks due to long service time, aging and weakening of insulation strength.
4.3.2 The insulation strength of the conductor decreases due to humidity, high temperature, corrosion and other reasons, resulting in breakdown and leakage.
4.3.3 During installation or maintenance, the insulation layer of the conductor is accidentally damaged.
4.3.4 The grounding insulation of electrical equipment is damaged.
4.3.5 The ignition point has ignited combustible materials.
5, information reporting procedures
Same as the comprehensive emergency plan.
6. Emergency treatment
Same as the comprehensive emergency plan.
6. 1 Disposal measures
6. 1. 1 The commander-in-chief has the right to decide the following matters according to the fire fighting needs;
1) Utilize various water sources;
2) Cut off the transmission of electricity, combustible gas and liquid, and restrict the use of smoke spots;
3) Delineate warning zones and implement local traffic restrictions;
4) Use related facilities of adjacent buildings;
(five) to prevent the spread of fire, demolition or damage to buildings and structures adjacent to the fire;
6) mobilize water supply, power supply, medical rescue, transportation and other relevant departments to assist in fire fighting;
6.2.2 When there is a fire in the mine office building, warehouse, dormitory and other places where people are concentrated, all part-time and non-part-time fire brigade members should carry out emergency rescue and disaster relief according to the on-site disposal plan.
6.2.3 On-site personnel should use the fire-fighting equipment equipped on site to put out the fire and control the spread of the fire.
6.2.4 After receiving the fire fighting order, the mine rescue team immediately organized the rescue team to rush to the fire to participate in the rescue.
6.2.5 members of the headquarters immediately rushed to the mine operation department to gather, and the operation department informed all district teams to organize fire fighting according to the fire to prevent the fire from spreading, and informed the public security fire brigade to participate in the fire fighting work.
6.2.6 The electromechanical management department, electromechanical team, transportation team and logistics department of the company should strengthen cooperation to ensure normal water supply and power supply, and ensure the smooth progress of fire fighting.
6.2.7 On-site commanders can take effective measures to organize fire fighting and emergency rescue in each post according to the on-site situation, and report to the headquarters in time.
6.2.8 After the fire is put out, the rescue team and relevant units should cooperate with the fire department to close the fire scene as needed, investigate the cause of the fire, verify the fire loss and find out the responsibility for the accident.
6.2.9 Eliminate hazard sources.
When the participating units and fire rescue personnel enter the scene of emergency rescue and disaster relief, they must first cut off the power supply at the scene, eliminate all hidden dangers and hazards, and prevent unnecessary casualties.
6.2. 10 Save people first.
Fire rescue personnel should make full use of existing equipment and equipment to quickly rescue the injured and trapped people in the fire, and hand over the wounded to other security guards or medical personnel at the scene to minimize casualties.
6.2. 1 1 Control first and then put out the fire.
Professional organizations and personnel of fire fighting and rescue shall conduct unified command and action, adopt the method of first controlling and then extinguishing according to the fire fighting plan and procedures, and use various professional equipment, equipment and equipment to extinguish the fire, so as to eliminate the hidden dangers of fire accidents.
6.2. 12 Transfer of property rights
In order to prevent the loss of materials and property, we should do a good job in the handover of property and materials while putting out the fire, and do a good job in the registration and handover procedures for valuable materials and property.
13 rescue support
All cooperative units should give full play to their functions to ensure the smooth fire fighting and rescue work of full-time firefighters in the front line.
7. Emergency support
Fire water source, dry powder fire extinguisher, personal protective equipment, demolition tools, etc.
;