Quality Commitment 1 This unit and the principal of this project promise to earnestly perform the following corresponding responsibilities in the construction of this project, and undertake lifelong quality responsibility according to law:
(a) establish and improve the quality management system, equipped with corresponding professional and technical personnel, key positions of personnel to do training first, and then mount guard.
(2) In strict accordance with the instrument and equipment management system and operating procedures, the weighing system, mixing system and transportation equipment of ready-mixed concrete shall be calibrated, verified and maintained regularly to ensure the normal use of all kinds of equipment.
(3) Strictly control the quality of raw materials, adhere to the principle of "inspection before use", and ensure that raw materials such as cement, aggregate, mineral admixture and admixture used meet the requirements of national standards.
(4) Produce ready-mixed concrete in strict accordance with the national standards gb/t 14902-20xx Ready-mixed Concrete, Specification for Design of Mix Proportion of Ordinary Concrete and Specification for Acceptance of Construction Quality of Concrete Structure Engineering, to ensure that the concrete strength meets the design requirements and the current national standards, and submit the factory quality certificate to users.
(five) the enterprise laboratory in accordance with the relevant technical standards for sampling inspection of ready-mixed concrete production, so that the operation is standardized, the record is true and the conclusion is accurate.
(six) to ensure the continuity and timeliness of concrete transportation, without adding water in the process of concrete transportation, such as quality problems caused by continuity can not be guaranteed, compensation for user losses.
(7) If the ready-mixed concrete products of this unit do not meet the requirements of relevant technical specifications, after identification and confirmation, this unit shall bear corresponding responsibilities and corresponding economic losses, and bear relevant legal responsibilities.
(eight) improve the product quality files, so that products can be traced. Quality responsibilities and obligations stipulated by other laws and regulations.
Signature of legal representative (official seal of the unit):
date month year
In order to ensure the quality and safety of food-related products and ensure the personal health and safety of the people, this enterprise solemnly promises to the society:
1. This enterprise is the main body responsible for the quality and safety of food-related products, and the legal representative of the enterprise is the first person responsible for the quality and safety of products.
Second, enterprises ensure that the management system, environmental conditions, hygiene requirements, factory buildings, equipment and facilities, inspection conditions and other conditions for the production of food-related products continue to maintain market access conditions for food-related products. If there is any major change, it shall be reported to Fengdong New Town Branch of Quality Supervision Bureau within 15 days.
3. Enterprises organize production in strict accordance with effective product standards and keep production records. The quality of the products produced meets the requirements of product implementation standards and corresponding laws and regulations, ensuring that fake and shoddy products are not produced.
Four, each batch of products of this enterprise must be inspected before leaving the factory, and the products that have not been inspected or failed to pass the inspection shall not leave the factory; Periodic verification of inspection equipment; Regular training of inspectors; Make and keep inspection records.
Five, the surrounding environment of the enterprise is clean and pollution-free, and the production and processing places, production equipment and warehouses are kept clean and tidy; Employees have health certificates, do a good job in personal hygiene protection when they take up their posts, and conduct regular training.
Six, the enterprise promises to establish health management system, personnel management system, incoming inspection record system, production process control system, additive use system, factory inspection record system, unqualified product management system, unsafe product recall system, consumer complaint acceptance system and other systems, and truthfully record the operation of the system.
Seven, the raw materials, auxiliary materials and additives used in the production and processing of this enterprise should meet the requirements.
National standards; When raw and auxiliary materials enter the factory, they must implement the purchase acceptance system and establish a purchase account. Do not meet the quality and safety requirements, shall not be used for production and processing; Do not use or abuse additives in violation of national standards; Non-food grade raw materials shall not be used for production and processing.
Eight, the enterprise's product label content is true and clear, and in line with the requirements of national laws and regulations and the corresponding product label standards, to ensure that product labels are not forged, product labels are not used to cheat or mislead consumers.
Nine, this commitment letter is posted in a prominent position in the enterprise, so that the majority of employees are familiar with it.
Commitment: xxx
Date: XX, XX, XX, XX
Chapter III Quality Commitment In order to standardize the business activities of road passenger transport, maintain the market order of road passenger transport, ensure the safety of road passenger transport and protect the legitimate rights and interests of passengers, our company solemnly promises to the road transport management organization:
1. Abide by the Law on Work Safety, the Law on Traffic Safety, the Regulations of the People's Republic of China on Road Transportation and other relevant laws and regulations.
Second, abide by the relevant provisions of the Safety Law, adhere to the guiding principle of "safety first, prevention first", and formulate and improve the safety production management system, including safety production operation rules, safety production responsibility system, safety production supervision and inspection, and safety production management system for drivers and vehicles. , and conscientiously implement.
1. Ensure the regular inspection and maintenance of passenger vehicles, keep the vehicles in good technical condition and ensure transportation safety.
2. Ensure that drivers and passengers are regularly organized for safety study and business training, so that drivers and passengers have good business knowledge, skills, professional ethics and safety awareness.
3. Ensure that the hired drivers and passengers are trained and qualified, hold relevant certificates (the driver has obtained the driver's license and qualification certificate suitable for the vehicle he is driving, and has no record of major traffic accidents within three years), and are healthy and competent.
Three, abide by the regulations on the administration of road transport industry, and obey the management of transportation departments at all levels, road transport management institutions and related units.
1, to ensure the intensive management and corporatization of passenger vehicles operated by the class line, and not to be affiliated with the operation.
2. During the operation of passenger lines, the company bears all operational risks. In case of operational difficulties and disputes, the company will solve them by itself, and properly arrange vehicles and employees. Need to coordinate with the competent authorities to solve, to reflect step by step, to ensure that there is no unauthorized shutdown, mob, contractor visits, skirt visits and other events that affect social stability.
3, to ensure that in accordance with the provisions of the operating period, the expiration of the operating period, take the initiative to withdraw from the passenger transport market.
4. Ensure that the road transport business license is not illegally transferred or leased, and the passenger transport management right is not transferred or transferred in disguise.
5, to ensure that strictly in accordance with the operation line approved by the transportation management agencies, to provide continuous services to the society, and shall not suspend or terminate the operation without authorization.
6. Ensure that all kinds of license plates and certificates of passenger vehicles are complete and effective, pay state taxes and fees on time, and insure passengers with carrier liability insurance.
7. Ensure that the materials submitted in the process of handling relevant business and reporting are true and effective.
Four, abide by laws and regulations, operate according to law, honest and trustworthy, fair competition, quality service.
1. Ensure that the vehicle does not exceed the speed limit or overtake, and the driver does not drive fatigue, discontinuously, drunk or illegally.
2. Ensure that the vehicle is uniformly marked, the vehicle capacity is clean and tidy, and put it in the designated position.
Name of spraying enterprise and complaint telephone number.
3. Ensure that drivers and passengers dress neatly, wear certificates, be polite, serve warmly, standardize their work and accept supervision.
4. Ensure that the car is clean and hygienic, and do not play unhealthy video programs such as violence and pornography in the car.
5. Ensure that passengers are not forced to take the bus, do not dump passengers, dump passengers to blackmail passengers, do not treat customers rudely, do not raise fares privately, do not negotiate maliciously, and drive safely and on time.
6. Effectively safeguard the legitimate rights and interests of passengers, ensure the safety of passengers, and strive to satisfy passengers.
Five, abide by the road transport emergency plan, in case of public emergencies, obey the unified dispatch, management and command of the people's government and relevant departments.
All the vehicles operated by our company, including the passenger cars declared this time, hereby solemnly promise:
If you violate the above commitments, you will voluntarily accept the punishment of the management department according to the regulations.
Commitment unit: Fengjie Xianghe Passenger Transport Co., Ltd. (official seal)
Signature of legal representative (signature)
November 20th, two thousand xx.
Quality Commitment Article 4 I. Quality Commitment of Fresh Water Pump
1. The motors are Nanyang Motor, Huli Motor, Hua Bin Motor and Bede Motor, which are characterized by high power, low noise, durability and beautiful appearance.
2. Bearings are made of well-known domestic brands: Harbin Bearing Factory. High precision, stable operation and low noise.
3. The pump shaft is made of high quality medium carbon steel and Baosteel products.
4. The pump body is made of cast iron.
5. The mechanical seal is made of the products of Shanghai Bogman Seal Co., Ltd., and it does not leak for 10000 hours.
6. Impeller adopts excellent hydraulic model, with good flow, small resistance, stability and high efficiency.
Second, the quality commitment to submersible pump
1. It is designed and manufactured by combining the advanced technologies of ABS Company in West Germany and Ebara Company in Japan, and can effectively pass fibrous substances with 5 times pump diameter and particulate matter with 50% pump diameter.
2. The impeller adopts single-piece or double-piece structure, which greatly improves the sewage passing capacity.
3. The mechanical seal adopts tungsten carbide double face seal, which makes it run in the oil chamber for a long time. No leakage within 10 thousand hours.
4. According to the needs of customers, install high-precision anti-interference water leakage detection sensors in the oil chamber of the pump, and install heat-sensitive elements in the stator winding.
5. Bearings are made of well-known domestic brands: Harbin Bearing Factory. High precision, stable operation, low noise, and the motor will not be overheated or burned in the whole lift.
6. If the diameter is above 200, the external circulation cooling system can be used as needed to ensure the normal operation of the water pump at the lowest water level in the pool. The motor is equipped with double protection, and the motor stator adopts good F-class insulation.
Third, the quality commitment of automatic frequency conversion speed control cabinet
1. The whole set of equipment is completely controlled by computer and microcomputer, and has manual operation function.
2 What is the accuracy of water supply pressure in the whole pressure range? 0.0 1 MPa
3. It has many functions, and it can also automatically turn on and off the equipment function at regular intervals.
4. The frequency converter is ABB product, and other original equipment is China Zheng Tai product. Other company products can also be adopted according to customer needs.
5. The variable frequency control cabinet controls the soft start of the water pump, and the motor has various protection functions such as overload, overcurrent, fever and short circuit.
6. Programming can make the pump run for many minutes, that is, no more than one pump, and keep the outlet constant pressure in turn.
Four, water pump special control quality commitment
1. Baosteel products are used for box boards.
2. The control cabinet has both manual and automatic functions. According to the different needs of users, there are special control cabinets for air conditioning, sewage discharge, fire fighting and living, as well as various functions such as pressure control, liquid level control, temperature control, time control and automatic switching.
3. The control range includes one control, one control, two controls, three controls and four controls. According to different needs, different control ranges are adopted, and both manual and automatic functions can be used without supervision.
4. The control cabinet has the functions of overcurrent, overload, lack of phase, leakage and short circuit protection. The special control cabinet for submersible sewage pump has water leakage protection to ensure motor safety.
All the above products enjoy the national three guarantees policy and are maintained for life.
Product quality commitment letter
According to the spirit of "People's Republic of China (PRC) Product Quality Law" and "People's Republic of China (PRC) Fire Protection Law", in order to improve the quality of supporting products and fire-fighting equipment for construction projects, protect the legitimate rights and interests of users, and earnestly fulfill the purpose of "quality first, * * * create harmony, quality service and customer's lifelong satisfaction", our company makes the following quality commitment statement to users, from the date of the statement.
1. Ensure the timely delivery with good quality and quantity according to the contract requirements.
2, establish and improve the enterprise quality system, strengthen quality management, to ensure that the factory products meet the national standards, industry standards and technical conditions stipulated in the contract, and ensure the reliability of product operation.
3. If the user finds quality problems during installation and use, he shall send maintenance personnel in time after receiving the notice from the user, and the maintenance personnel shall not leave the site before troubleshooting or making a conclusion. During the "three guarantees" period of the product, it is indeed a product quality problem, and the liability for compensation agreed in the contract should be strictly fulfilled.
4. The quality of ex-factory products is guaranteed by "three guarantees", with one-year warranty, six-month replacement and three-month return (unqualified products are recalled in batches). Products outside the "Three Guarantees" period are guaranteed for life.
Our company has issued the following products on, please check them.
The above batches of products have been inspected by the quality inspection department of our company, and all meet the quality standard requirements agreed in the transaction contract, namely.
Our company promises to submit the quality assurance certificate or the inspection report of the company's quality inspection agency.
XXXXXXXX Co., Ltd. (official seal)
20xx 165438+ 10/0/4
In order to promote the company's quality revitalization year and achieve the goal of zero defects in engineering quality, the construction technical level of steel reinforcement workers must meet the design requirements and national standards. At the same time, as the labor service company to which it belongs, it has the right and obligation to ensure the quality of the project. To this end, the following clauses are formulated, which are expected to be strictly observed by the steel workers in the project construction.
1, steel processing must use the steel bar that has passed the inspection. The use of untested steel bars will result in a fine of 500 yuan for each specification and a discount on materials.
2, shear wall, frame column, beam slab steel binding, must be in accordance with the design requirements of the spacing to draw lines, not according to this requirement, shear wall, frame column each fine 200 yuan, beam each fine +000 yuan, plate each fine 300 yuan.
3, plate reinforcement layout should be 50 mm away from the beam side, beam stirrup hoop position should be 50 mm away from the non-bearing side, column stirrup and shear wall horizontal reinforcement should be 50 mm away from the beam surface, do not meet the requirements of fine 200 yuan (calculated by points).
4. The stirrups on the main beam at the junction of primary and secondary beams shall be bound according to the design requirements. There is no stirrup on the main beam at the junction of primary and secondary beams, and 200 yuan will be fined (calculated by points).
5. If the positional relationship between primary and secondary beams is wrong, 500 yuan will be fined and reworked (calculated by points).
6. If the specifications of steel bar binding are not carried out according to the design requirements, 500 yuan will be fined and redone (calculated by points).
7, steel binding lap length more than 50 mm, fine 100 yuan; 200 yuan will be fined for exceeding 100 mm; If it exceeds 200mm, it will be fined in 500 yuan (calculated by points).
8, beam reinforcement and column reinforcement longitudinal stress binding should be full, shall not jump to tie, who jump to tie, each beam or each column fine 200 yuan (calculated by cumulative points).
9. If the double-layer two-way steel mesh or negative reinforcement is not effectively separated by stirrups, each plate will be fined 500 yuan (calculated by points).
10, the stirrups in the beam-column core area are not set or less set, and 500 yuan is fined; 200 yuan fines are set for unbound places (calculated by cumulative points).
1 1, displacement of main reinforcement of shear wall and frame column 10 ~ 20mm, 200 yuan will be fined, and 500 yuan will be fined if it exceeds 20mm, and technical measures will be taken to deal with it. The expenses incurred by the treatment are self-care (integral cumulative calculation).
12. The anchorage length of reinforcement shall meet the design and specification requirements. When direct anchorage is not possible, bending anchorage or mechanical anchorage should be adopted. If it is still directly linked, 500 yuan will be fined (calculated by points).
13, rebar spacing and rebar cover thickness should meet the design requirements. If the entity detection has unqualified points, it will be fined 1000 yuan (calculated by cumulative points). The post-processing expenses shall be borne by the labor service.
Project manager: xxx
Person in charge of labor service: ccc
Year, month, sun, moon, sun.
Quality Commitment Article 6 According to the provisions and requirements of the Regulations on Cosmetic Hygiene Supervision and other relevant laws and regulations, in order to ensure the quality and safety of cosmetics handled by our unit, we hereby make the following commitments:
First, strictly implement the "Regulations on Cosmetic Hygiene Supervision" and other relevant laws and regulations, conscientiously implement the incoming goods inspection system, the system of claiming certificates and tickets, and establish ledgers.
The second is to ensure that the sanitary environment of the business premises and storage premises meets the requirements; The business premises and warehouses (storage areas) shall be kept clean inside and outside; With ventilation, dust-proof, moisture-proof, insect-proof, rat-proof and other facilities; Both bulk cosmetics and cosmetics for customers to try out have anti-pollution facilities.
3. The cosmetics it deals in are purchased from legal channels, which meet the requirements of the Regulations on Cosmetic Hygiene Supervision and have qualified labels.
Fourth, ensure honest management, do not make false and exaggerated propaganda on the cosmetics it operates, and do not sell expired and deteriorated cosmetics.
5. Consciously standardize business practices, accept the supervision of administrative organs according to law, and consciously accept social supervision to safeguard and protect consumers' health and other legitimate rights and interests.
If intransitive verbs violate the above commitments, they shall voluntarily accept the corresponding administrative punishment given by the food and drug supervision and administration department according to laws and regulations.
Commitment date: March 20xx 15.
Commitment xxx
Article 7 The quality commitment letter appoints the person in charge of the house I have built: I will strictly implement the national laws and regulations on engineering construction, fulfill the quality responsibilities and obligations of the construction unit, and ensure that the engineering construction quality meets the design requirements and the standards of construction quality acceptance specifications. And ensure that:
A, the project department to establish engineering quality assurance system, the head of the construction process is responsible for the construction quality;
Second, ensure the construction quality meets the acceptance criteria, do not cut corners, and do not shoddy;
Three, all kinds of materials, components, equipment, concrete, etc. The project is carried out in strict accordance with the requirements of the specification, and can only be used after sampling and inspection under the supervision of the building owner before use;
Four, in strict accordance with the relevant provisions of the relevant personnel inspection and construction quality inspection and evaluation. Whether the engineering quality of important functional divisions is qualified by self-inspection first, and then submitted to the relevant departments of the construction unit for acceptance before the next working procedure can be constructed;
Five, eliminate common quality problems, the specialist is responsible for the inspection and implementation. Found quality problems, timely rectification to achieve qualified quality.
Six, the unit project completion acceptance guarantee: complete quality control information; Project safety and functional testing data are complete; The engineering quality of each division is qualified; The spot check results of major projects meet the requirements of relevant professional quality acceptance specifications; Quality acceptance meets the requirements;
Seven, after the completion of the project acceptance and delivery, within the time limit stipulated in the contract to fulfill the quality warranty responsibilities and obligations;
Eight, strictly fulfill the above commitments, honest and trustworthy, to ensure the quality of the project;
Nine, because of the construction quality problems, willing to bear the corresponding responsibilities, willing to accept the punishment of the construction administrative department;
Commitment: xxx
20xx year x month x day
Quality Commitment Article 8 Enterprise Name: Yangxin COVID-19 Ecology
Our company (factory), as the legal representative of the company (factory), makes the following commitments in order to ensure the quality of the food produced meets the requirements of safeguarding human health and personal safety:
1. Strictly abide by the product quality law, the food hygiene law, the measures for the supervision and management of quality and safety of food production and processing enterprises and other laws and regulations, operate legally, be honest and trustworthy, organize production in strict accordance with effective product standards, safeguard the legitimate interests of consumers, strictly control food quality and safety, ensure food safety before leaving the factory, and undertake corporate social responsibilities.
2. The food processing process is strictly regulated to avoid biological, chemical and physical contamination, and to prevent cross-contamination between raw food and cooked food, raw materials and semi-finished products, finished products, old food and fresh food.
3. Raw materials, additives, packaging materials and containers used in food production meet the relevant provisions of the state. Never use expired, invalid, deteriorated, dirty, aged, recycled or inedible raw materials to produce processed food. When purchasing food raw materials, ask the supplier for a certificate, or conduct self-inspection or entrust inspection to pass.
4, engaged in food production and processing personnel health, pollution-free diseases and other diseases that affect food quality and safety.
5. Establish and improve the enterprise quality management system, implement the whole process quality management from raw material procurement, product ex-factory inspection to after-sales service, establish post quality responsibility system and strengthen quality assessment.
6. Ensure that containers, packages, tools and equipment for storing, transporting and loading and unloading food are clean and safe, and do not pollute food.
7. Food must be inspected before leaving the factory. Food that has not been inspected or failed to pass the inspection shall not leave the factory or be sold.
8. After obtaining the food production license, the food quality and safety market access mark (QS mark) shall be printed (affixed) in strict accordance with the relevant regulations before the food leaves the factory, and shall not exceed the scope of evidence collection. Food labels are true, not fake, and expired and deteriorated foods are not sold. Put an end to and spurn adulteration, shoddy, fake, unqualified products as qualified products, fair trade, and maintain a good market order.
9. Ensure the authenticity and legality of the materials, documents, certificates and production facilities provided by our company (factory) for obtaining the food production license, and ensure that the measures and means of food quality and safety control after obtaining evidence and the level of enterprise quality management system are not lower than before obtaining evidence.
10, consciously accept the supervision of the company (factory) by the quality and technical supervision department through inspection, return visit, annual review and product quality spot check, and continuously improve the production and operation of the enterprise. Welcome social supervision, listen to consumers' opinions, recall foods with food safety risks in time, and safeguard consumers' health and safety.
In case of violation of food safety-related laws and regulations and the above commitments, the company (factory) and I are willing to bear all responsibilities within the scope of their duties and compensate all corresponding losses.
Signature of legal representative:
Signature date:
In order to implement the government's spirit of strengthening safety in production, we will conscientiously implement the Law on Safety in Production, the Regulations on Safety Management of Hazardous Chemicals and the Measures for the Administration of Refined Oil Market of the Ministry of Commerce, further strengthen the management of refined oil market in our city, and standardize the operation behavior of gas stations. Ensure the orderly, safe and development of gas stations in the city. We will sign the following gas station safety responsibility guarantee:
First, gas stations should establish and improve the safety production management system, firmly establish the consciousness of "safety first, prevention first" and strengthen the target responsibility of safety production. Further earnestly implement the safety production management system, stop the behavior that affects the safety of gas stations, and eliminate hidden dangers in time. The stationmaster (legal representative) is the first person responsible for the safety of the gas station. He should take full responsibility for the safe operation of the gas station, urge employees to abide by the operating rules, conduct regular safety education and pre-job training for employees, strengthen daily inspection and eliminate hidden dangers. Ensure that the safety work tasks are in place and the responsibility lies with people.
Two, the gas station to organize an inspection work every month. Carefully check whether the management rules and regulations are implemented; Whether safety education has been carried out; Whether the on-site facilities are complete; Whether the fire control facilities are complete; Whether the open flame management is standardized; Whether the appearance of the station is clean and tidy; Whether hidden dangers are eliminated in time; Check whether the records are complete; Whether the rectification measures are implemented.
Three, gas stations should adhere to the principle of "safety first, prevention first" and the principle of "safety self-inspection, self-removal of hidden dangers, self-responsibility, supervision in place". Implement the responsibility system for production safety, and request the higher-level issuing authority to revoke the relevant certificate in case of violation of the provisions of the responsibility certificate and accidents.
Party A: ×× police station
Party B:
date month year
Quality Commitment Letter to XXX Owner 10
In order to improve the reputation of the company's products and let customers use our broken bridge aluminum alloy doors and windows with peace of mind, regardless of the specifications, models and batch sizes of the doors and windows, the company makes the following commitments on the quality of all the doors and windows sold and installed:
1. Raw and auxiliary materials used for door and window products are put into processing and production according to the contract.
2. In the production process of door and window products, all possible means will be used to control the process to prevent inherent or hidden defects and nonconforming products.
3. The commitment to the quality of doors and windows products includes product quality and service quality. We will not only provide you with high-quality products, but also provide you with high-quality services to ensure the delivery date and after-sales service of the project.
4. All aluminum alloy doors and windows manufactured and installed by our company will be rectified if there are quality problems due to our company.
5. The warranty scope and responsibilities of the above products during the warranty period:
A the warranty period is one year from the date of completion acceptance.
B damage caused by quality problems of spare parts shall be replaced by the manufacturer free of charge.
C. in case of man-made damage, charge according to regulations.
D materials or parts specified and provided by party a are not covered by the warranty:
E. if you find any quality problems, please contact the quality assurance department of our company in time.
Qishuyan Lucheng Longcheng broken bridge heat insulation windows and doors factory
20xx-4-2