Step 1: Register
Bring the original and photocopy of your ID card to the registration point of the driving school and wait for the theoretical study time. (Note: Foreign students need temporary residence permits, which can be handled by the driving school; )
Students with other driver's licenses are required to bring the original driver's license (additional driving);
To learn to drive a big truck, you must have a local ID card and be at least 2 1.
Required information:
(1) If you are registered in this city, you need to prepare 8 small one-inch headshots with a white background and 3 copies of your ID card. A4 paper is used in the center (the second-generation ID card needs to be copied on both sides);
(2) Non-local accounts should provide 8 one-inch small white-headed color photos, and the ID card should be copied in triplicate on A4 paper (one on the front and back of the second-generation ID card) and a temporary residence permit valid for more than one year.
(3) Servicemen and Armed Police officers should prepare 12 recent photos of non-standard clothes on a white background 1 inch, 1 personal identification (official or soldier's ID) and 1 personal identification (including current address) above regimental level.
(4) Hong Kong residents, 4 ID cards, 2 Home Visit Certificates, original registration form for temporary accommodation of overseas personnel 1 copy or foreigner residence permit 1 copy, and one-inch bareheaded non-uniform recent photo 12.
(5) Substitution of classes by Hong Kong people: Substitution of classes by Hong Kong people is also done by students of the vehicle management office, which was not accepted by the driving school two years ago.
Step 2: Physical examination
International students with valid identity documents can take photos for physical examination, and those who have not applied for a driver's license in the local public security vehicle management department can get on the bus.
1. Physical examination items: electrocardiogram, blood pressure, height, weight, hearing, grip strength, back strength, vision and color vision.
2. Physical examination place: the designated place for physical examination of new drivers.
3. If you pass the physical examination, you should make an appointment for a preliminary test with the Certificate of Physical Condition of Motor Vehicle Driver and a copy of your ID card (and a copy of your temporary residence permit issued by a foreign ID card).
Step 3: Take the subject 1 exam (written test).
After arranging the theoretical study time, carry the student ID card and the notice issued by the driving school for a two-day theoretical study. It is suggested that you can go to the driving school exam or mock exam before the formal exam of the subject, and then go to the exam after you have fully mastered it. After the student's information is verified, the driving school will arrange the subject one exam.
The process of the first subject examination is: physical examination-fingerprint collection-computer examination.
The theoretical examination is arranged on working days, using paperless computer examination, which mainly examines basic knowledge such as road traffic safety laws and regulations, traffic signals and traffic rules. Subject test paper *** 100, divided into true questions, false questions and multiple-choice questions, with full score 100 and qualified 90 points. Or fail the exam,/kloc-reschedule the exam after 0/5 days. After the course is passed, the examination room of the vehicle management office will make a driving skill admission ticket according to the date when the students pass the exam.
Note: Being late for the exam on that day is regarded as a student's abstention; You must bring the original ID card on the day of the exam.
Matters needing attention in subject examination
1. After the start of school, students will get the Training Textbook for Motor Vehicle Drivers. After studying for more than one week (calendar time), you can take the exam after one week. Test score 100, above 90 points.
2. You can study by yourself or attend a basic theory training class (the cost is included in the examination fee).
The knowledge about car maintenance and motorcycle in the textbook is not included in the exam.
Step 4: Subject 2 Training
Students can go to the designated training ground for training with their boarding pass. The field test items of small cars are "Five Training Tests", that is, reversing into the warehouse, parking on the ramp, parking sideways, driving in corners and turning at right angles. Training time can be arranged or negotiated by the driving school. The second exam can only be reserved after the training of the exam subjects.
2, subject 2 exam (project)-let's talk about cars first.
(1) "Five out of Five" field road test:
After passing the long-term training, the examination room will arrange time for the "five-in-five" on-site road test, and the examination place will be the examination room of the registered driving school. Those who fail can reschedule the make-up exam after 20 days.
The contents of the "Five Selection" site road inspection are as follows:
1. Back to the warehouse
2. Turn right 90 degrees
Step 3 park on the side of the road
4. Stop on the uphill road and start on the ramp;
5. Driving on a curve.
Among them, according to the application of quasi-driving type, set the necessary items:
Applying for a driver's license for large and medium-sized vans will increase examination items such as simulating expressways, rainy and foggy days, slippery roads and emergency handling. In the subject 2 venue driving skills test.
-Necessary items for large buses and city buses to be allowed to drive: starting uphill, stopping sideways, turning at right angles, driving in curves, passing through continuous obstacles and passing through unilateral bridges.
-Tractor driving mode requirements: starting uphill, driving in a curve, turning at a right angle, passing through a width-limiting door at a speed limit, and passing through continuous obstacles.
—— Necessary items for medium-sized passenger cars and large trucks: starting uphill, driving in corners, side parking, speed limit, passing through doors, passing through continuous obstacles and passing through unilateral bridges.
-Requirements for quasi-driving small cars and small automatic cars: No less than 6 items to be tested. Vehicles equipped with manual transmission must be tested for side stop and uphill start, and vehicles equipped with automatic transmission must be tested for side stop. Other items are randomly selected by the examiner.
—— Required items for ordinary three-wheeled motorcycles and ordinary two-wheeled motorcycles: there should be no less than six items, of which starting uphill, driving in curves and passing through unilateral bridges and runways are required items, and other items are randomly selected by examiners.
-Other testing items required for quasi-driving models shall be formulated by the traffic administrative department of the provincial public security organ.
After students pass the second subject, they can make an appointment for the third subject only after taking road test training as needed.
Step 5: Subject 3 exam (road test)
Basic item of road driving skills 16, including getting ready to get on the bus, starting, going straight, changing lanes, stopping by the side, going straight through the intersection, turning left at the intersection, turning right at the intersection, crossing the crosswalk, passing through the school district, crossing the bus stop, overtaking, turning around and driving at night. The test mileage of small cars is not less than 3 kilometers, and no less than 20% of candidates are selected for night test; If the night test is not carried out, a test simulating the use of night lights should be carried out.
The road test is the actual boarding test. Those who fail the exam can be rescheduled after 20 days.
The following are the four processes of the subject three exam: 1. After receiving the inspection prompt, check the left rear tire-check the right rear tire-when passing through the right rear door, open the door, then close it-check the right front tire-stop at the left front corner of the car, look around the car body and make sure it is safe-go over to check the left front tire-go to the door and shout "report", and get on the bus after receiving the prompt.
2. Hand in your ID cards with both hands-after receiving the examiner's prompt-adjust the seat-test whether the clutch, accelerator and gear are in neutral-fasten your seat belt-adjust the rearview mirror-observe the instrument-press the clutch to the bottom-put the first gear on-observe the left rearview mirror-turn on the left turn signal-honk the horn-report &; The instrument is normal-release the brake after receiving the prompt-slowly lift the clutch and start it with the throttle. (pay attention to driving in the normal lane after starting, and don't run to the overtaking lane at the beginning. )
3. Quickly shift to 5th gear and move forward smoothly-the examiner prompts you to overtake (note that the examiner may not be loud, and there may be no overtaking ahead, but you must complete an overtaking process, so don't be at a loss because you haven't overtaken)-observe the left rearview mirror-turn on the left turn signal-honk the horn-observe the right rearview mirror-turn right in the overtaking lane after a while.
4. The examiner prompts you to pull over-observe the right rearview mirror-turn on the right turn signal-release the accelerator-press the brake pedal moderately-press the clutch to the end after the speed drops-see if the position is appropriate (press the brake pedal to the side for about 30CM, stop smoothly-turn the turn signal to the normal position-raise the hand to brake-and put it in the air.
Topic III Process Overview:
1. Go around the car clockwise from the left door and return to the left door: report.
2. Observe the traffic on the right rear side before getting on the bus, and then get on the bus according to the standard action.
3. After getting on the bus, please ask the instructor to check the ID card, adjust the seat, adjust the left, middle and right rearview mirrors, check the instrument and fasten the seat belt.
4. Select neutral, ignite, put in first gear, turn on the left turn signal, honk the horn, release the brake, observe the left rearview mirror and the right endoscope, make sure they are safe, and report to the teacher that all instruments are working normally. Have you started?
Summary: 1, 2:3 1, hand brake rearview mirror.
5. After starting the vehicle at night, you need to turn on the headlights and turn off the warning lights.
6. The vehicle is driving in a straight line. Please observe the endoscope and left rearview mirror every 15 seconds or so. When you meet an intersection, please observe the situation on the left and right sides of the intersection and slow down (driving at night, alternating the far and near lights).
7. When you encounter a red light or stop, brake with one hand and then shift to second gear.
8. When the instructor signals "stop at the selected point", put away the accelerator, turn on the right turn signal at the same time, observe the endoscope and the right rearview mirror to the right, ensure that the direction is safely adjusted to the right, brake, slow down to 20mph, and gradually downshift (4.3.2. 1).
9. Get off: After parking the car, pull the brake, take neutral, turn off the turn signal, release the clutch brake, turn off the engine, shift gears, report the operation to the instructor, unfasten the seat belt and get off, and observe the endoscope and rearview mirror before getting off. After observing the left head with a half-open door, turn right and close the door with your left hand.
Summary: Hand brake the air direction light and turn off the first rearview mirror.
If you pass the three-way exam, the next step is the theoretical exam of subject three (commonly known as subject four).
Step 6: Subject 4 (Common Sense Test of Safe and Civilized Driving)
The main contents of the examination include the operating requirements of safe and civilized driving, the knowledge of safe driving in bad weather and complex road conditions, the knowledge of handling flat tires after traffic accidents and other temporary handling methods in emergency situations. The examination paper consists of 50 questions, which are mainly presented in the form of cases, pictures and animations. True or false questions, single choice questions, multiple choice questions, full score100,90. It is suggested that students can carry out simulation exercises or exams through driving schools to strengthen the study of theoretical knowledge.
Step 7: Take a driver's license test.
After passing the common sense test of safe and civilized driving, the vehicle management office will make a driver's license for the students (the specific time for obtaining the license is subject to the time for issuing the license in the examination room). I need my ID card to get my driver's license at the registration place. It can also be mailed to students through driving school.
The above is a comprehensive guide to the driving test process. Students who want to take a driver's license can learn about it and prepare for the challenge.
Million car purchase subsidy