What are the safety points of hot work? Introduction is as follows:

First, preparation before operation

Before hot work, full preparations must be made, including but not limited to the following aspects:

1. Planning and preparation: specify the specific requirements for hot work, including time, place, tasks, tools and equipment, etc. Make a detailed operation plan and define the division of labor and responsibilities. Prepare the required hot tools and equipment, and check whether the equipment is in good condition.

2. Meteorological conditions: pay attention to the weather conditions and avoid hot work in bad weather conditions, especially in strong winds. Ensure that the operation is carried out under suitable meteorological conditions.

3. Cleaning the operation area: clean the combustible materials in the operation area to prevent any combustible materials from getting close to the fire source. Clean up the sundries in the operation area, ensure good ventilation and remove obstacles.

4. Safety signs: Set up obvious safety signs in the hot work area to warn other personnel and prompt that there is a fire source in the work area.

5. Preparation of fire-fighting equipment: check and prepare fire-fighting equipment to ensure its normal use. Different types of fires may require different fire extinguishing equipment, so choose the appropriate fire extinguishing equipment according to the specific situation.

6. Personnel training: Conduct necessary safety training for personnel involved in hot work, so that they can understand the dangers and control measures of hot work and be familiar with emergency plans and emergency escape routes.

7. Communication with relevant departments: Communicate with relevant departments such as fire protection and security in time to inform the time and place of hot work, so as to provide support and assistance at any time.

Second, the hot work safety points

When hot work is carried out, the operation must be carried out in strict accordance with the safety points to ensure safety. The following are some safety points for hot work:

1. Ensure the safety of fire source: use qualified ignition tools, avoid using inflammable and explosive materials for ignition, and ensure the stability and controllability of fire source. Avoid placing fire sources near flammable materials and keep a safe distance.

2. Temperature control: control the temperature of the flame to avoid exceeding the ignition point of the material, thus preventing the occurrence of fire.

3. Fire-proof and explosion-proof measures: Fire-proof and explosion-proof facilities and equipment, including fire-proof shutter doors, fire-proof coatings, fire-proof rooms and explosion-proof boxes, shall be set up in the hot work area for isolation and protection.

4. Ensure good ventilation: keep the hot work area well ventilated, ensure that smoke and harmful gases can be discharged in time, and reduce potential safety hazards.