Set the BIOS CD-ROM drive to start.
1. Press F 12 to enter the bios main interface and select advanced BIOS functions.
2. Set the first boot device to CD.
3. Some BIOS is not like this, it depends on the startup list. Several startup methods are as follows:
1. CD (CD boot).
2.USB hard drive.
3. Shh-zip up.
4. Hard disk. First, use the up and down keys to set the cursor to 1. CD-ROM, and then press the PageUp key to set the cursor to the first position. ?
5. Finally, press (F 10) to save, exit and restart.
Reinstall the USB flash drive of win7 system and install the tutorial of ghost win7 operating system.
Preparatory work/about to start work
1. Back up or download the driver of your machine in official website, otherwise it may not work normally after completion.
2. Ghost win7 system.
3. A USB flash drive above 4G.
4. Name of "General PE" software: TonPE_V5.0
Making u disk PE system
1. Run the downloaded generic PE toolbox, and then click Next.
2. Click the "Know" button directly.
3. Check "Make Bootable U Disk" and click "Select" button.
4. Select the USB flash drive to be made and the making method here, and then click the "Make" button. In the pop-up dialog box, click OK.
5. Wait for the installation to complete.
6. After the installation is completed, click the "Finish" button.
Install ghost win7 system
operation sequence/order
Note: ghost win7 system needs to be copied to a USB flash drive.
1. Set the computer to boot from USB flash drive:
Insert the USB flash drive, then start it, and press ESC, F8, F 12, F 1 1 or other function keys (depending on the motherboard model).
2. A boot menu will pop up. Press the up and down keys here to select the drive letter of the U disk.
3. After entering the WINPE system, click the "Ghost Backup and Restore" tool and select "Advanced Mode".
4. In the new window that pops up, check "Recovery Partition", select the system installation directory, and find the prepared one. Gho file and click "Execute".
5.after five o'clock. After the Ghost system is completed, you can successfully install the system by restarting the computer and completing the subsequent operations of system installation.