In the real society, there are more and more affairs that need meeting minutes. Meeting minutes are different from meeting minutes, which are just an objective documentary material. Do you know how to write meeting minutes? The following is the summary of the first quarter safety production meeting I collected for you, hoping to help you.
Minutes of the first quarter safety production meeting: 1 20xx Company's safety production work meeting was held in the conference room on the fourth floor of the passenger station on the afternoon of128. Zhou, director of the office, presided over the meeting, and members of the company's safety production leading group and safety management personnel of all units 10 people attended the meeting.
At first, the meeting listened to the report on safety production and main work of each unit in X month, including standardization of safety production, investigation of potential safety hazards, safety education and training for drivers, and health creation of passenger stations. , the overall performance is good. In terms of passenger income, due to the bus transformation of Xiongkou passenger line and the mandatory scrapping of yellow-label vehicles, the company's passenger buses and passenger resources have been further reduced, the benefits have been declining, and the operating situation is not optimistic.
X safety in production: there was no accident of safety liability in the passenger station and tourist passenger center, but there was an accident of no liability in Honghu and Beijing passenger buses under the jurisdiction of the Ministry of Transport, which is being handled at present.
According to the reports of each unit and the existing problems, the meeting put forward the following requirements and arrangements for the next stage of safety production:
1. When the temperature drops suddenly in winter, all production units should further strengthen safety management, strengthen safety publicity and education and staff training, configure triangular wood, snow chains, safety hammers, fire extinguishers and other cold-proof equipment as required, fulfill the obligation of safety notification, and nip in the bud.
Second, in accordance with the standardization of production safety and the requirements of "one post and two responsibilities", we will improve all kinds of data sorting, implement safety responsibilities, and keep communication and reporting with the transportation management departments related to creation and declaration.
Three, the collection of some bus arrears, the transportation department should intensify the collection work, Spring Festival travel rush must be fully in place. The shuttle bus in Shashi involves the issue of collecting health fees at Shashi Station, and will clean up and analyze the bus situation and explain the situation to the operator. Suspension of business due to refusal to pay.
Fourth, regarding the scrapping of yellow-label vehicles, we should actively negotiate and communicate with the traffic police department in time, especially the scrapping of long-distance buses to win the support of relevant departments.
Five, all units should do a good job in the preparatory work of Spring Festival travel rush in 20xx, and plan the layout in advance. At the same time, carry out safety inspection activities, focusing on vehicles, drivers and stations, and make inspection records.
Six, according to the operation of the passenger station, planning and bus docking program, adjust the construction plan. And using the existing station conditions, in order to play a greater role in a smaller scope, long-distance and short-distance passenger buses will be integrated into the station and parking spaces.
Seven. Make internal adjustments to the company's institutions and personnel, especially the employment of passenger stations, and optimize the replacement of some temporary employment to save expenses on the premise of ensuring the stability of the personnel signing labor contracts. The passenger station will first come up with a specific adjustment plan and report it to the company for review, and put it into practice before June 10.
Minutes of the first quarter safety production meeting 2 Meeting time: 20xx February 28th.
Meeting place: conference room on the third floor of the company.
Moderator: ×××
Participants: company leaders, heads of departments and project departments.
Main contents of the meeting: annual work safety and arrangement.
I. Purpose of the meeting:
In order to strengthen the company's construction safety management, effectively prevent all kinds of safety accidents, and ensure the successful completion of the company's safety work objectives and tasks in, this safety production work meeting is specially held to arrange and deploy the safety production work in.
Second, the content of the meeting:
1, the company's safety work goal is to achieve no safety accidents and zero accidents throughout the year.
2. Fully implement the responsibility system for production safety, and sign the target responsibility book for production safety at different levels. The company shall sign a responsibility letter for production safety with the project department of resumption of work in strict accordance with the requirements of management measures, and clarify the responsibilities and work of both parties. Adhere to the principle of "production must be managed safely", hold regular safety meetings and organize safety inspections. All departments, teams and groups, important posts and individuals with special posts should also sign the responsibility book of safety production targets.
3, improve the safety rules and regulations, make the enterprise safety work have laws to follow, adjust the safety management focus according to the actual situation of the company, meet the superior safety inspection work, summarize the shortcomings in safety work, and actively improve. We must resolutely implement the leadership responsibility system for the rectification of hidden dangers of accidents and implement management step by step. The safety leaders of the company must be responsible for the hidden dangers of accidents on the construction site, rectify and implement them within a time limit, so as to make the responsibilities clear and the assessment in place, and achieve the "five in place" in daily management, that is, organization in place, responsibility in place, inspection in place, assessment in place and rewards and punishments in place.
4. In order to make the awareness of safety in production deeply rooted in people's hearts and everyone establish the idea of "safety first, prevention first", the company regularly holds safety production work meetings, with no less than one regular safety meeting and safety inspection every month; Attach importance to safety training and education, organize safety education activities at least once every quarter, and organize all departments, project departments, construction personnel and full-time security officers to participate; Strengthen the training, evidence collection, review, inspection and management of operators of special types of work, and it is strictly forbidden to work without a license. Conduct "three-level" safety education for new personnel entering the construction site, and make education records. Only after passing the examination can you take up your post, and the education rate should reach 100%, and a model of the minutes of the three-level education card safety production meeting should be established.
5. Strictly implement the "safety inspection" system, and the company adopts a combination of regular inspection and random inspection to implement dynamic management of safety production. Such as seasonal safety inspection, rainy season construction safety inspection, special sensitive period safety inspection, lightning protection, fire prevention, heatstroke prevention, etc. , to find out the hidden dangers to rectification, re-examination unqualified to be punished, shall be investigated for the responsibility of the relevant personnel, stop rectification until qualified.
6. The company actively participated in the activity of "Creating a Safe and Civilized Construction Site" and worked out the standard-reaching plan in combination with the actual situation of the company and the project. The company should strive for civilized construction site according to the standard of civilized construction site and strengthen the inspection of civilized construction site.
7, strengthen the supervision and management of safety protection articles and facilities, safety protection articles (safety net, helmet, seat belt, insulated shoes, etc. ) must be a qualified product that meets the relevant national norms and standards. Machinery entering the construction site shall be accepted at the site, and unqualified machinery shall not be used.
8. According to the actual situation of the company, formulate emergency plans for production safety, establish emergency rescue organizations, set up leading groups for emergency handling of major safety accidents, organize relevant emergency drills, and prepare sufficient emergency rescue equipment to minimize personnel and property losses.
9. According to the company's safety production meeting system, hold regular safety production meetings every month to summarize, solve and arrange safety production work.
10, rational use of safety production management fees, strict implementation of funds in place, shall not be misappropriated, set up a special account or special funds, funds can be extracted according to 2% of the project or output value, thus effectively improving the working environment of construction personnel, avoiding the occurrence of safety accidents, and earnestly earmarking.
1 1. The safety supervision department should do a good job in the company's safety management throughout the year, conduct safety inspections on the construction site regularly or irregularly, and implement the company's safety system. Organize and carry out "Safety Month" activities, and the Minister of Work Safety is responsible for supervising the implementation, so as to form a strong safety production atmosphere, implement the core idea of "safety work" in every work, and improve employees' safety awareness and accident prevention ability.
12, the project manager shall organize the construction in strict accordance with the requirements of the construction organization design and special construction scheme. Make safety education and technical disclosure before construction, strengthen inspection during construction, and make acceptance after construction. The full-time safety officer of the project department is responsible for checking the safety production in the construction process, correcting the illegal behavior in time, and urging the rectification of potential safety hazards.
13. The project department strengthens the inspection of safety work on the construction site (focusing on scaffolding, foundation pit, formwork, "three treasures" and "four openings" protection, construction electricity, material hoist, external elevator, tower crane, lifting and construction machinery), carries out regular, irregular and special inspections, and urges the project department to rectify the existing hidden dangers in time.
14, establish a fire control system on the company-level construction site, strengthen fire control management, and conduct fire prevention work on the construction site on a regular basis.
15, all drivers in the company must drive slowly, and it is forbidden to drive after drinking, and they must pay attention to safety when driving.
16, "May 1", "Eleventh", "Spring Festival" and other major festivals to carry out safety inspections, strengthen safety on duty, and ensure holiday safety.
Xxxx Limited
Minutes of the first quarter safety production meeting 3 i. The meeting pointed out that:
20 17 with the joint efforts of the members of the town safety Committee, the overall safety production in our town remained stable.
Minutes of safety production meeting. From June to March, 65438, the situation of production safety in our town was generally stable. However, the foundation of safety production is still weak, especially the owner's sense of responsibility for safety production is weak, and individual owners' awareness of safety production is not strong, which leads to serious road traffic safety hazards. The meeting informed that a safety accident occurred in Baofa Comprehensive Processing Factory on the evening of April 10, requiring all relevant responsible units and personnel to attach great importance to it, strengthen supervision, pay close attention to the implementation of rectification measures, and effectively prevent serious accidents.
Second, the meeting emphasized that:
All responsible units and responsible persons must raise awareness and enhance their responsibilities; It is necessary to conduct regular and comprehensive inspections and find problems in time; It is necessary to promptly urge rectification and eliminate hidden dangers; To strengthen cooperation, pay close attention to * * * management, do a solid job in the current work safety, and create a safe, stable and harmonious society.
Three. Meeting requirements:
All relevant responsible units and responsible persons should strictly follow the deployment and requirements of the higher authorities on safety production work, and combine the actual work and the scope of responsibility to earnestly do a good job in the current safety production work.
1, strengthen publicity and training.
It is necessary to organize all production enterprises to conduct publicity, education and skills training for special post personnel who must hold certificates and strictly implement and abide by laws, regulations and policies on production safety, and establish the consciousness that "production must be safe first" and "safety is the greatest benefit"; Villages should cooperate with the police station to carry out a comprehensive road traffic safety education and rectification activities.
2, strengthen the responsibility, clear work objectives, pay close attention to the implementation of the responsibility system for production safety.
Firmly establish the concept that development is the first priority and safety is the first responsibility, attach importance to safety production ideologically, and consciously grasp safety production from action. With reference to the control indicators issued by the county government, at the beginning of the year, our town formulated practical safety production responsibility targets, signed safety production target responsibility letters with village committees, relevant departments and enterprises, and implemented the safety production responsibility system layer by layer, so as to truly realize clear responsibility, responsibility to people, strict management and real implementation of responsibilities.
3, to continue to deepen the investigation and management of hidden dangers, do a good job in the supervision of production safety in key industries.
(1) Establish classified management of hidden dangers and classified monitoring system of major hazard sources from two levels of government and enterprises, so as to institutionalize and regularize the investigation and management of hidden dangers and resolutely put an end to new hidden dangers. Enterprises should comprehensively investigate hidden dangers, implement rectification responsibilities, funds and monitoring measures for all kinds of hidden dangers that may cause accidents, and make rectification within a time limit to ensure safe production. The government should strengthen guidance, supervise the establishment of hidden danger investigation and management database, and regularly supervise the hidden danger investigation and management. Improve the quarterly meeting system, safety production performance reporting system, safety education and training system, and improve the emergency rescue plan system of relevant departments. Implement three requirements: first, carefully investigate hidden dangers, leaving no blind spots and dead ends; Second, the responsibility, measures, funds, time limit and implementation of the fifth plan for the rectification of hidden dangers; The third is to establish and improve the classification management mechanism of major hidden dangers and consolidate the results of hidden dangers management.
(2) Intensify the investigation of safety accidents, investigate and deal with serious accidents, strictly investigate the responsibilities, and earnestly implement the safety responsibility system. In accordance with the principle of "four don't let go" (the cause is unclear, the responsible person does not deal with it, the workers do not educate, and there are no preventive measures).
(three) focus on deepening the special rectification work of production safety. The member units of the Town Safety Committee shall, according to the functions of their departments, regularly carry out special rectification work for production safety, and carry out various special rectification activities such as road traffic safety, safety of dangerous chemicals, safety of non-coal mines, safety of civil explosive equipment and fireworks, safety of boilers and pressure vessels, construction safety, fire safety and school safety.
In the second quarter, the work of safety in production showed two characteristics: First, May Day came, and second, geological disasters such as landslides were prone to occur in the spring and summer rainy season. These are the key and difficult points in the work of safety production, and all the work of safety production in the next stage should be implemented.
① Safety rectification of hazardous chemicals, eliminating safety rectification, resolutely closing and banning "three-in-one" and "all-in-one" places, and resolutely closing public gathering places with major safety hazards. (2) Construction safety improvement, special equipment safety improvement, geological disaster investigation, etc. (3) Strengthen publicity and education, improve safety quality, strengthen safety training for the principal responsible persons of enterprises, safety production management personnel and special operations personnel, and improve safety awareness and safety skills. (4) Strengthen emergency management and improve the monitoring system. All departments, units and enterprises should pay attention to the preparation and revision of the plan, ensure the practicability and operability of the plan, and strengthen the construction of emergency teams.
4. Strengthen the reporting system for responsibility implementation.
From the beginning of this quarter, villages and relevant regulatory responsibility units shall, before the 25th of the last month of this quarter, briefly report to the Zhen 'an Office in writing the development of safety supervision in this quarter and the safety situation within the scope of their duties.
Minutes of the First Quarter Safety Production Meeting 4 Agenda: Safety Production Meeting
Meeting time: xx year x month x day
Meeting contents:
A, electrical facilities installation regulations
The meeting stipulated the installation requirements of electrical facilities: in the future, all units must install electrical equipment and facilities according to the requirements of safety production standardization and unify the standards. For example, the equipment installation personnel should design and install according to the requirements of three-phase five-wire system, the front end of the socket of manual (mobile) tools should be equipped with leakage protection, and the power supply facilities such as socket board and control box should ensure that the PE line (zero line) is in place.
II. Work Arrangement of 20xx Annual Safety and Environmental Assessment
Combined with the actual situation of the Group, the annual safety and environmental assessment of 20xx has been adjusted on the basis of 20xx:
1. The assessment time is adjusted to: 20xx65438+1October1-20xx September 30th;
2. The company's major personal injury accident (referring to medical expenses) is adjusted to10.5 million yuan;
3. The total amount of safety EIA is adjusted to 654.38+10,000 yuan;
4.20xx annual safety and environmental accidents exceed the annual assessment indicators, and the penalty amount is adjusted to 50% of the excess (30% in 20xx);
Three. Other work notices
1.20xx annual safety production innovation declaration, if each unit meets the reward clauses in the safety production reward and punishment management system, it shall submit written materials to the safety supervision department of the logistics support center before 65438+February 10.
2. Each unit must complete the signing of the responsibility letter between the department and the security team at the end of 65438+February. The format of the responsibility book requires standardization, and the contents of the terms can be adjusted according to the actual situation of the unit on the basis of last year.
3. "Safety Management System" 3.3. 1 When employees go out during work, they must hold the leave application form or tolerance approval form approved by the superior supervisor of their unit for the record in the gatehouse. 3.3.2 Employees who take the shuttle bus to the north and south factories shall be supervised by the shuttle bus driver. If it is found that the bus driver gets off the bus halfway to do private affairs, he should give feedback to the safety supervision department of the logistics support center and notify the relevant units after investigation and verification. Starting from 65438+February 1, all guard rooms will be strictly implemented according to the system, and all units are requested to do relevant work.
Four, the next step to remind the safety work.
1. Through the standardization construction of safety production, the basic management data of each unit has been basically improved. Next, all units should rectify the existing problems in time, and the future work should be carried out in strict accordance with the standardization requirements.
2. Before the equipment installation and layout, all units should set out from the long-term development direction and arrange the equipment scientifically and reasonably according to the requirements of safety production standardization to avoid repeated rework.
3. Strengthen the safety production management of special equipment, and relevant responsible departments shall conduct safety inspection according to regulations and make records. For the equipment that needs inspection and testing, the responsible department must test it according to the regulations. Boilers, pressure vessels, lifting machinery, elevators, pressure gauges, safety valves, etc. Must be used during inspection.
4. Strengthen the safety production management of special operations personnel, and unlicensed personnel shall not work at their posts; The operation of certified personnel must be standardized and standard, and no illegal operation is allowed.
5. Strengthen the safety management of hazardous chemicals: users should designate specific personnel and posts, and they must be stored as required to strengthen the safety control during use.
6. In addition to the infrared protection of punching machines, units that can install protective nets on small punching machines should implement them in time.
Minutes of First-quarter Safety Work Meeting 5 654381On the morning of October 23rd, the first-quarter street safety work, fire fighting and Spring Festival travel rush work meeting was held. More than 30 participants, including the leaders of the two committees of the home street, the leaders of the police station and the industrial and commercial office, the secretary and director of the neighborhood Committee, the heads of relevant units in the jurisdiction, and the staff of the security office. Zeng Xianwei, deputy secretary of the Street Party Working Committee, and Fu xx, member of the Street Party Working Committee, conveyed the spirit of the first quarter conference on preventing serious accidents, fire fighting and Spring Festival travel rush, and issued the Notice on Seriously Doing a Good Job in Safety Production this Winter and Next Spring, and the Notice on Establishing a 20xx Spring Festival travel rush Traffic Safety Leading Group in xx Street, which summarized and analyzed the safety production work in the street in 20 16 years. Through hard work. However, safety work should always be unremitting. At the same time, combined with the reality of our street, the work tasks in the first quarter and the whole year of 20xx were fully deployed and arranged. In particular, during the Spring Festival, arrangements have been made for the fire fighting and emergency traffic in Spring Festival travel rush, requiring all community neighborhood committees and relevant units under their jurisdiction to seriously publicize the safety of fire fighting and emergency traffic in Spring Festival travel rush to ensure the safety of people's lives and property in the whole street.
The meeting decided:
1, strengthen the publicity and education of safety production. During the Spring Festival, community neighborhood committees and related units should make use of billboards and other publicity tools to continuously strengthen publicity and education on safety in production, and timely issue safety tips and leaflets to enterprises. In particular, it is necessary to strengthen the fire safety publicity of small dining places, housing tenants, venue rental units and residential buildings. During the period of Spring Festival travel rush, there was a large passenger flow, so it is urgent to publicize the safety work in Spring Festival travel rush.
2. Highlight key points and conduct a comprehensive investigation. Neighborhood committees of various communities should conduct a comprehensive investigation of small catering establishments and enterprises within their respective jurisdictions. In particular, small bamboo and wood processing enterprises, enterprises with high energy consumption and backward equipment and technology should establish and improve archives. And report to the street safety office for the record. Focus on fire safety and focus on inspection. In the near future, the street security office will also conduct key inspections on key enterprises and key parts within its jurisdiction. Community neighborhood committees in standardized communities should do a good job in evacuation drills for residential areas and fire fighting before the year.
3, strengthen supervision and inspection, pay close attention to hidden dangers rectification. In the first quarter of the street, a safety inspection focusing on safety and fire prevention will be carried out throughout the street. The key points of inspection are: small catering places, bamboo and wood enterprises, dangerous goods business places, transportation, engineering construction sites, crowded places, etc. Resolutely put an end to "three in one". Carefully investigate the potential safety hazards found in the inspection and make rectification within a time limit. At the same time, the rectification of hidden dangers found before will be supervised again to completely eliminate potential safety hazards. We should do: big publicity, big investigation, big rectification, big exercise and big promotion. Ensure safe production during the "two festivals" and "two sessions".
4. Qin Wang, director of the office, put forward three points of emphasis on the work of safety in production at this stage: earnestly strengthen leadership, further enhance the sense of responsibility and urgency of safety in production during the Spring Festival, and the street security office and community neighborhood committees should conscientiously implement it, and whoever has problems will be responsible; Do a good job in safety duty during the Spring Festival and the "two sessions", strengthen the system of duty on holidays and leadership shift, smooth the channels of information transmission on production safety, and ensure that all kinds of production safety accidents and major safety hazards are reported in a timely and accurate manner; Do a good job in pre-holiday production safety inspection focusing on fire prevention, rectify problems in time when found, and focus on preventing key parts. We should have an attitude of guarding against death and resolutely put an end to fire and other safety accidents.
Minutes of safety production meeting in the first quarter 6 time: ××× year × month × day × month × day × month × day × month × day × month × day × month × day × month × day × month × day × day × month × day × month × day × month × day × month × day × month × day × month × day × month × day × month × day × month × day × month × month × day × month ×
Participants: managers of all departments and offices and squad leaders of all workshops.
Moderator: ×××
Meeting contents:
A, each department safety work report in the first quarter:
(1) Comrades summarized the safety work in the first quarter, introduced the safety operation regulations (chapter 1-5), and reported the contents of the next safety training.
(2) Comrades made a report on safety production, implementation of safety system, equipment maintenance, use of operation ticket system and wearing of labor protection articles in the first quarter.
(3) comrades summed up the work of production safety in the first quarter:
First, through regular safety meetings organized by various workshops, the safety awareness of employees has been improved;
The second is to implement the relevant measures of the company's safety production management;
The third is to strengthen safety inspection and rectify the identified safety hazards in time;
Fourth, strictly supervise the wearing and use of labor insurance articles to ensure the safety and health of employees themselves.
Second, the comrades explained the problems existing in the work of production safety in the third quarter:
Up to now, there has been no personal injury, process and equipment accident in the company, which is the result of the concerted efforts of all employees, Qi Xin, and also the direct embodiment of increasing investment in safety production and taking effective measures this year. However, we should also see that there are still shortcomings in safety production, and there are still many hidden dangers in management operation and site:
First, the management and operation consciousness is not strong, and the measures are not in place;
Second, there are still some potential safety hazards at the site, and preventive measures should be formulated and rectified;
Thirdly, in actual operation, there are still personal, technological and equipment accidents at the workshop level.
Therefore, in terms of safety in production, we must never take it lightly or be complacent.
3. Comrades arranged several key points for the next safety and health work:
Implement the awareness of improving safety production, self-protection and wearing labor protection articles put forward by the manager's office meeting in September, and fully accomplish the safety work goal of XXX years.
(1) Seriously organize and implement the safety training plan for the second half of the year. Through the implementation of this training, we can learn lessons from accident cases and warn employees' safety awareness ideologically. At the same time, do a good job in training records and filing according to the requirements of the municipal safety supervision department. (The production management department and office are responsible)
(2) Organize a professional safety inspection in September. This safety inspection is mainly to find out the hidden dangers of accidents from all aspects. A complete process is formed from the aspects of personnel organization and grouping, preparation before inspection, key points of inspection process, and implementation and rectification of hidden dangers. The office is required to draft a notice covering the above contents together with the production management department and issue it in the form of a document. Time: issue documents this week and organize inspections next week. (The production management department and office are responsible)
(three) to establish a complete and clear safety and health management committee, clear personnel composition, job responsibilities and working methods. The production management department and the office are required to draft documents for the above contents and issue them. (The production management department and office are responsible)
(4) Get ready before winter. (Each unit is responsible)
(five) to complete the revision of the "operating rules". (Production Management Department is responsible)
Fourth, pay attention to the acquisition of laws and regulations, which is the responsibility of the production management department, and often visit relevant websites to obtain this information.
The office establishes a special management system for sending and receiving official documents to form a normal mechanism. At present, the focus is on finding and implementing the following three documents.
① Standards of labor protection articles;
(2) Special security expense account;
③ About safety standardization.
Xxxx Limited
;