Current location - Training Enrollment Network - Education and training - How should hotels conduct fire safety knowledge training?
How should hotels conduct fire safety knowledge training?
Hotel fire safety knowledge training content is as follows:

First, the principle of fire alarm: when a fire alarm is found, if the fire is already fierce, you should call the police immediately, telephone119; When any employee discovers or judges that the fire alarm is controllable, he shall not call 1 19 without the consent of the general manager of the hotel or the authorized person of the general manager, so as not to cause unnecessary panic to the guests. (Fei Jing 1 10, Emergency Center Tel 120)

Second, pay attention when calling the fire alarm: the voice must be clear and the language should be smooth; Must be clear about the fire unit, detailed location (big target), burning substances, fire size, trapped people, names and telephone numbers; Arrange personnel to meet fire engines at key intersections.

Note: It is strictly forbidden to lie about the fire alarm. Falsely reporting a fire alarm is an illegal act that disturbs public order and endangers public safety, and will be punished by warning, fine, administrative detention and so on.

Three, ABC dry powder fire extinguisher practical method:

1 shake: shake it backwards several times, because the powder in the bottle will precipitate for a long time, resulting in poor spraying effect;

2 Pull out: Pull out the safety bolt;

3 Spray: Hold the nozzle with one hand and the joint between the nozzle and the nozzle with the other hand (thumb and forefinger), keep a good distance (about 2 meters), press the handle and aim at the root of the flame before firing.

Four, the use of fire hydrant:

1 Open the fire hydrant box door and take out the hose;

One end of the hose is connected to the water outlet of the fire hydrant, and the other end is connected to the water gun;

3. Press the fire hydrant pump start button in the box;

4 turn on the water valve switch of the fire hydrant, quickly pull it to the fire point and aim at the root of the fire source to extinguish the fire. Description: When the fire pump control cabinet is in the automatic state, directly press the fire hydrant start button to start the fire pump. When the control cabinet is in manual state, someone should be sent to the fire pump room to start the fire pump in time.