In today's society, people use responsibility letters more and more, and signing responsibility letters can inspire us to do our best to meet the needs of the post. So, have you mastered the format of the responsibility book? The following is the safety production responsibility book of the marketing department (5 general remarks) that I compiled for you. Welcome to share.
Marketing Department 1 Safety Production Responsibility Letter is used to further implement the safety production policy of "safety first, prevention first, comprehensive management", make full use of the safety production responsibility system, do a good job in safety production in XX District, implement the company's main responsibility for safety production, prevent all kinds of accidents, and ensure the safety and health of the company's property and employees. According to the principle of "whoever is in charge is responsible", the managers of all departments of the company and the first person in charge of production safety of the company
A, the company's production safety objectives
1, and there was no death accident above moderate level.
2, industrial accidents (direct economic loss of more than 3000 yuan) is zero.
3. The fire accident is zero.
4, no food poisoning accidents, traffic accidents and criminal cases.
Second, the company's production safety responsibilities
1. The person in charge of production safety of the company is the first person in charge of production safety. Follow the general principles of "whoever is in charge is responsible" and "production must be safe" and be fully responsible for the safety production of this enterprise.
2. Abide by and implement the Safety Production Law, Fire Protection Law, Labor Law and other laws and regulations, publicize and thoroughly implement the relevant safety production rules and regulations of the state, development zones and companies, conscientiously implement and deploy all work, promote safety management, and study and popularize modern safety management methods and technologies.
3. Check and urge the management cadres and workers at all levels of the enterprise to consciously perform their safety duties in their work, strictly implement the rules and regulations of the enterprise, strengthen the management of production safety, and do not violate regulations.
4, according to the rules and regulations of production safety, organize the safety inspection of the department on a regular basis, to find out the security risks, to timely implement the rectification, take corresponding measures in time, and report to the production safety protection committee.
5. According to the rules and regulations of production safety, organize the incoming safety education (three-level education and training assessment for new employees) for newly recruited employees and related personnel (internship, training and foreign construction workers), as well as the safety training and safety publicity work for employees before taking up their posts and changing jobs, so as to be trained, recorded and effective.
6, responsible for the canteen safety and health and fire prevention work.
7, analysis of the department of production safety work, to do a good job of accident prevention and accident investigation and analysis.
8, formulate the department's production safety plan, improve the safety operation procedures and inspection system.
9, organize the implementation of the department of production safety accident emergency treatment and rescue plan and regular exercise.
10. Organize and implement the maintenance of the production equipment of this department, ensure the normal operation of the equipment, prevent the fire-fighting facilities and safety signs from being damaged, and ensure the smooth passage and safe exit.
1 1. Strengthen the management, registration and archiving of special equipment and special operators in this department, organize regular job skills training, register hazards and take preventive measures.
12, organize regular fire inspection according to safety production rules and regulations, and do a good job in public security.
13. Truthfully report production safety accidents to the production safety committee or the higher government. Understand the inspection of the superior administrative department in charge of production safety, understand the supervision and guidance of the safety Committee on production safety, do a good job in production safety and prevent accidents.
Department Manager: (Seal)
Person in charge of production safety of the company: (seal)
The term of validity of this responsibility book is from February 65438, 20XX to February 20th, 20XX.
Signing date: 20xx65438+February 1.
Marketing Department II Safety Production Responsibility Letter In order to successfully complete the company's annual work objectives, conscientiously implement the national Labor Protection Law, the Safety Production Law and the company's laws and regulations on safety production, advocate safe and civilized production, ensure the safety of life and property of station personnel during production, and implement the safety production responsibility system to individuals, Hong Zhong Gas Station and employees hereby sign this Safety Production Responsibility Letter.
I. Signing materials
1. Employees promise to obey the company's' safety management' and strictly abide by the company's safety rules and regulations and operating procedures during their work in the company.
2. Employees are not allowed to bring inflammable, explosive or other dangerous goods into the company premises. When unsafe hidden dangers are found in the company, they must be controlled in time and reported to the person in charge of the department (including the production unit) quickly.
3. Employees are not allowed to hold controlled knives and instruments, fight, steal other people's property and company articles, destroy the company and other people's property, and have other behaviors that threaten the personal and financial safety of the company and others.
4. Employees should carefully check the lighting, doors and windows, office equipment, vehicles and other equipment in the work area after work to ensure that the electrical equipment is turned off and the office doors and windows are closed and locked. If employees violate the above requirements or other personal reasons, resulting in fire, theft or equipment damage and other safety accidents or losses, the company will hold employees accountable.
5. The company will investigate the employees' corresponding responsibilities for unsafe hidden dangers, accidents or personal injuries caused by improper operation of equipment and appliances or failure to operate according to the prescribed procedures.
6. Employees must pay attention to personal safety during vacation or not going to work (including going out during working hours for personal reasons), and must abide by national laws and regulations, traffic regulations, codes of conduct in public places or other standards that the whole society should abide by. If you fail to comply with the traffic laws and regulations of the company, the employees will bear all the responsibilities themselves.
7. Employees shall strictly abide by the company's dormitory management regulations, and shall not engage in pornography, gambling, drugs and other illegal acts or other behaviors that violate social morality in the dormitory or other places provided by the company, and shall not lead non-company employees into the dormitory or accommodation without authorization. Once found, the company will cancel the employee's accommodation qualification and impose corresponding penalties according to company regulations. If illegal and criminal acts are involved, the company has the right to transfer employees to public security organs for legal treatment.
8. Employees are not allowed to use high-power electrical appliances in company premises (dormitories, offices, production and business premises) without authorization, or engage in hot work without authorization, or engage in other unsafe behaviors such as electric shock, fire and other personal casualty accidents. In addition to tracing the responsibility of the relevant responsible person, employees must bear all responsibilities.
9. Employees must strictly abide by the canteen management system. It is forbidden to enter the canteen operation room without permission, and it is forbidden to use canteen materials, facilities and equipment and liquefied gas bottles without authorization.
10, employees should take good care of the company's property and their own property, and should not store valuables or cash in the office or dormitory. In case of property losses caused by violation of the above provisions, the employees shall bear their own responsibilities.
1 1. Be familiar with the specific information of "Four Harms" and actively participate in the emergency plan drills organized by the company and departments.
12. Take an active part in the educational activities of the safety team, learn the safety technology operating rules of this position, and operate strictly according to the rules in the work.
13, strictly abide by various safety production systems, observe labor discipline, and put an end to unsafe and impolite behaviors such as violating labor discipline and illegal operation.
14, to understand the company's safety education and safety technical disclosure, you must sign the safety education registration form and safety technical disclosure book. In the process of production, we must conscientiously implement safety technical measures to ensure the safe production of gas stations.
15. Actively participate in the activities of creating safety and politeness demonstration projects to ensure that you will not hurt yourself, others or be hurt by others.
16, strengthen the safety follow-up inspection before, during and after work, handle hidden dangers at any time when found, and make safety disclosure to team members before and after work.
17, must understand the supervision and inspection and correct leadership of the company's management personnel, unconditionally implement the hidden dangers rectification notice issued by the company, complete the rectification on schedule and report it to the company for review.
18. Safety protection articles, production facilities, measuring instruments, etc. in the production process. Should be used correctly, and strengthen the maintenance in the process of use.
19, and has the right to refuse to carry out the company's illegal command and wrong instruction.
20. In case of safety accidents or major safety hazards, employees must immediately report to the company and cooperate with the investigation and handling of the company and relevant departments.
Second, the handling of violations
You must arrive at your post in time during working hours, wear uniform clothes, do not leave your post for personal reasons, wear safety helmet, fasten your seat belt for aerial work, and remind the construction unit to set up safety protection facilities, signs and warning signs around the construction site in time before starting work. Supervision work logs and materials should be timely and complete, and production accidents or safety hazards should be reported in time. If any violation of the company's system is found, corresponding punishment will be imposed according to the company's relevant system.
This responsibility is valid for one year from the date of signing.
(Note: printed on both sides, multiple people with the same employment nature can sign one at the same time)
Company: employee (signature area):
Responsibility Letter for Safety Production of Marketing Department 3 I. Responsibilities
(1) General production safety responsibilities
1, carefully keep all kinds of documents, materials, files and bills, and put an end to confidentiality, leakage and loss accidents;
2. Destruction of documents and materials. It is necessary to specify the time and place and designate a special person to handle it;
3, all staff should be familiar with the "three knowledge, three meeting, three energy" and fire emergency handling procedures; (3) Knowledge: knowledge of post fire hazards, knowledge of fire prevention responsibilities of departments and knowledge of fire emergency plans; The third meeting: will use and maintain fire extinguishers, will report fire, will evacuate and save people; Three abilities: can check and find problems, can publicize fire control knowledge, and can put out primary small fires)
4. Master the relevant emergency plans for production safety, and be responsible for protecting the important files of this department from losses when problems occur. When a major safety accident occurs, you should command calmly, organize rescue according to the accident handling procedures, and report to the safety management department and the person in charge of safety in time;
5, do a good job of "five prevention" (fire prevention, theft prevention, damage prevention, explosion prevention, prevention and control of safety disasters and accidents);
6, it is forbidden to pull wires in the office, it is forbidden to use electric furnace, electric heater and other equipment, it is forbidden to use open flame, it is forbidden to store inflammable and explosive dangerous goods;
7, have the responsibility to pay attention to the use of cold and hot air supply in the office, telephone communication, office desks and chairs and other facilities and equipment, found that the fault timely report to the relevant departments for maintenance;
8, improve the indoor health management measures, often cleaning and dust removal, adhere to a good, clean and fresh indoor working environment.
9. Before coming off work every day, the personnel of this department must turn off the power supply according to the prescribed operating procedures, conduct safety patrol inspection, and ensure that there are no hidden dangers before locking the door and leaving.
(2) Job site personnel responsibilities
1, workers in the process of labor, should strictly implement the rules and regulations of production safety and safety technology operating procedures, it is forbidden to violate the rules and regulations;
2. Operators should know about the education and training of production safety, the dangerous factors existing in this position and their possible serious consequences, master the safety knowledge suitable for this position, master the ability of accident hidden danger investigation, and have emergency self-help and escape skills;
3, homework personnel found hidden dangers of accidents or other unsafe factors, should immediately report to the leadership;
Operators have the right to put forward suggestions on safety in production, refuse illegal operations or risky operations, and have the right to stop operations or leave the workplace after taking possible emergency measures when finding an emergency that directly endangers personal safety.
4. Carefully maintain the equipment and facilities, adhere to the safe operation of good equipment and facilities, adhere to a clean working environment, and achieve civilized production;
5. Operators should do "three no injuries" in the process of labor, that is, do not hurt themselves, others and others;
6, homework personnel should abide by labor discipline, stick to their posts, concentrate, and abide by the relevant operating procedures. It is forbidden to wear slippers, barefoot, shirtless and work after drinking; Do a good job in civilized production and keep the job site clean and tidy.
7, protect all kinds of safety protection devices, operation control panel, signs, fire equipment, etc. , shall not be moved or removed at will;
8. After the work, it is necessary to cut off the power supply and extinguish the fire, leaving no potential safety hazard, so as to clear the field after the work.
Second, the goal.
1, and the satisfaction rate is over 90%;
2. Master rate of safety management system and operating procedures100%;
3. The qualified rate of equipment, facilities and safety fire equipment maintenance in this position100%;
4, refused to illegal command100%;
5. All records 100% perfect;
6. The skilled utilization rate of fire fighting equipment is100%;
7. Education and training rate100%;
Third, the reward and punishment assessment methods
According to the Management System for Formulation, Review, Revision and Assessment of Safety Production Responsibility System, the implementation of the responsibility system and the completion of safety production objectives are assessed on February 30th every year, and the assessment adopts a scoring system, and the assessment results are recognized by the department.
Four. explain
1. The head of the department and the employees of the department sign the responsibility letter for production safety. The employees of the department complete their duties and objectives one by one, and the department head will conduct an assessment at the end of the year.
2, warehouse administrator, electrician, welder and other job responsibilities can be found in the safety management system assembly.
Signature of department employee:
Signature of department head:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Responsibility Letter for Safety Production of Marketing Department 4 I. Responsibilities
1, responsible for the company's safety production input;
2. The company is responsible for the planning and planning of safety production investment when preparing long-term development plans and annual plans;
3. Ensure the implementation of funds such as safety technical measures, labor protection articles, physical examination of workers with occupational hazards, post subsidies, heatstroke prevention and cooling, and safety incentive fees, so as to achieve earmarking and regular accounting.
Second, the goal.
1, the incidence of serious injuries, deaths, major traffic accidents and fires is 0;
2. Minor injury accidents shall be controlled within 2 cases per year (including 2 cases);
3. The accident investigation rate is 98%, and the general accident handling rate is 98%;
4, production safety accident is zero;
5. Ensure that the annual safety investment is fully guaranteed.
Third, the reward and punishment assessment methods
According to the Management System for Formulation, Review, Revision and Assessment of Safety Production Responsibility System, the implementation of the responsibility system and the completion of safety production objectives are assessed on February 30th every year, and the assessment adopts a scoring system. The assessment results shall be approved by the first person in charge of production safety.
Four. explain
The main person in charge and the chief accountant sign a letter of responsibility for production safety, and the chief accountant completes the responsibility objectives one by one, and the general manager conducts an assessment at the end of the year.
Signature of Chief Accountant:
Signature of person in charge:
Marketing Department Safety Production Responsibility Letter 5 Chief Engineer Safety Production Target Responsibility Letter
I. Responsibility
1, responsible for the company's production safety;
2, when organizing the preparation or revision of technology or process regulations, must meet the requirements of safety in production;
3. Adopt new technologies and processes for safe production, eliminate backward production methods, improve the working environment, reduce labor intensity and reduce occupational injuries.
Second, the goal.
1, the incidence of serious injuries, deaths, major traffic accidents and fires is 0;
2, major equipment accident is 0;
3. Minor injury accidents shall be controlled within 2 cases per year (including 2 cases);
4. The accident investigation rate is 98%, and the general accident handling rate is 98%;
5, production safety accident is zero;
Third, the reward and punishment assessment methods
According to the Management System for Formulation, Review, Revision and Assessment of Safety Production Responsibility System, the implementation of the responsibility system and the completion of safety production objectives are assessed on February 30th every year, and the assessment adopts a scoring system. The assessment results shall be approved by the first person in charge of production safety.
Four. explain
The main person in charge and the chief engineer sign a letter of responsibility for production safety, and the chief engineer completes the responsibility objectives item by item, and the general manager conducts an assessment at the end of the year.
Signature of Chief Engineer:
Signature of person in charge:
;