In real life or work and study, everyone has a slogan that impresses him. Slogans can enhance people's sense of social responsibility. Do you know what kind of slogan is a good slogan? The following is the inspector slogan I compiled for reference only. Welcome to reading.

Inspector slogan 1 on-site inspection You can't give me the love I want.

I can't ignite that brilliant spark.

You never consider the temperature I need.

I have been expecting you to put on that coat for me, so that I can feel a little warm in this biting cold wind, but you have broken my heart again and again.

I have been expecting you to leave some time for me to freshen up, but you always say: too busy, too busy.

In fact, I don't need much. I just hope to have a solid and reliable guarantee, but you still can't give it to me.

Inspector's slogan 2 1. Strict quality inspection ensures good quality.

Second, quality is the partner of success, and inspection is the guarantee of quality.

Third, it is smoother to do a good job if one person neglects a hundred people.

Fourth, it is inevitable to do a good job of inspection if you want to have zero defects in products.

Five, serious, meticulous, careful, good inspection, to ensure satisfactory quality.

Sixth, the testing standards can be observed, and there is no need to worry about quality and efficiency.

Seven, rigorous thinking, strict operation, strict inspection, careful verification.

Eight, a little difference, the pros and cons are separated.

Nine, eyes, hands and heart are indispensable.

Ten, the original records should be reliable, effective detection and analysis.

Pay more attention and ask less questions.

Medical examination leaflet

Medical laboratory association

Introduction: Our society is called "Taizhou University Medical Laboratory Association", which was formally established on April 1 day, 2065438. The main purpose of the association is to popularize medical laboratory knowledge, provide students with the exchange of laboratory knowledge and skills, provide a platform for self-display, exercise and growth, and also want to better serve medical students, increase our medical knowledge and skills, and make full and effective preparations for future employment.

Community spirit: Our highest spirit is sincerity, friendship and truth-seeking. Seeking is the determination to overcome difficulties without fear, and being pragmatic is seeking truth from facts about the test results. Our slogan is: choose-just to determine the direction; Work hard-just to realize your dream! How far your mind is, how far you can go; Go beyond yourself and challenge the limits.

Aims of the association: taking the same as the foundation-always "testing skills and social practice are recognized by members and society" is the foundation of the association's survival and development; Practice is the most important-inspection skill is practice, and practice comes from social practice, so it is valuable to implement correct inspection methods; Pay attention to the public-pay attention to people's happiness, pay attention to the maturity of members' skills, actively promote the development of mass organizations, and let the inspection association get a better tomorrow.

Community activities: We will hold various activities, such as lectures, unique inspection competitions, skill competitions, members' participation in social practice, members' training, experimental inspection of basic knowledge, application of inspection instruments, inspection skills and hospital probation. We can also organize group tours for members in our spare time on weekends. The experience exchange meeting will be held in the form of a heart-to-heart meeting to discuss and exchange experiences. Everyone can discuss the development of the community and the organization of activities and express their opinions. Through these activities, we can improve the professional skills and skilled operation of members, lay a solid foundation for work and enrich students' lives. Community Department: Instructors: Chen Jiayu, Yao Jun and Zhang Yu.

Secretariat department: Understand members' suggestions to the club, and inform functional departments of specific activities and their progress. External relations department: responsible for the association's contact with the outside world and raising funds for the association's activities.

Finance Department: Responsible for the management of community funds and strictly supervise the use of funds by various departments.

Planning department: responsible for the planning of community activities and improving the development of activities.

Organization department: responsible for the specific matters of activities (personnel arrangement, rewards and punishments) and membership matters.

Propaganda department: responsible for the publicity of community activities and maintaining the image of the community.

Learning department: skills training group, responsible for the guidance and training of professional skills.

As long as students who are interested in medical knowledge can join our physical examination association, we will organize some basic medical knowledge training such as blood test and blood pressure measurement later, and medical students will also apply for laboratories to learn medical knowledge through the combination of physical objects and book knowledge. Interested students are looking forward to your joining.

Recruitment target: Freshmen recruitment location: in front of the teaching building.

Recruitment time: 20151June11October recruitment hotline: June1261May.

Quality inspector basic knowledge test paper (with answers)

QC inspector basic knowledge test paper

Name and job number score

Fill in the blanks (65438+ 0 for each blank, ***30).

1. The main reasons for quality fluctuation are, and so on.

2. Three-inspection system refers to self-inspection, mutual inspection and special inspection.

3. The X-R diagram, also called, can be divided into two parts: and.

4.GB/T2828.1:2003 and.

5. The team slogan of our quality department team is:

6. The team requirements of our quality department team are:,,.

7. Disposal methods of nonconforming products generally include: rework, repair, degradation and scrapping.

8.6S includes sorting, rectifying, sweeping, cleaning, habit and safety (saving).

Two true and false questions (draw "√" correctly and "×" incorrectly, each question 1 point, * * *1point).

The 1. process exists independently. (×)

2. All indicators of the product meet the standards and must meet the needs of users. (×)

3. Quality inspection has nothing to do with production workers. (×)

4. The measuring instruments used must have a certificate of approval and be within the validity period. (√)

Product quality is not only designed and manufactured, but also tested. (√)

6.SPC can be applied to all aspects of enterprise management. (√)

7. After the unqualified finished products are selected, there is no need to conduct inspection again. (×)

Three indefinite multiple-choice questions (at least one answer is correct, *** 10)

1. Product classification includes (ABCD)

A hardware b software c process materials d service

2. According to the product realization process, the quality inspection is divided into (ABD)

A incoming inspection b process inspection c sampling inspection d final inspection

3.PDCA is the basic process of quality improvement, and the specific sequence is (d).

A. planning, inspection, implementation and disposal

C. Inspection, implementation, disposal and planning D. Planning, implementation, inspection and disposal

X= 18.036, δ=0.086,

UCL=(F)LCL=(B) Median =(D) Minimum =(E)

a 18.036 mmb 17.778 MMC 0d 18.02mm 17.89 MMF 18.293mm

5.5W 1H Generally speaking, H means (D).

A person b machine c environment d method

6. Precautionary measures emphasize (c).

A. eliminate the causes of potential nonconformities B. analyze the causes of problems that have occurred.

C. prevent the recurrence of nonconformities.

7. There is a counting sampling inspection scheme of (13,2 1), and the rule for judging the batch is: randomly select13 unit products from the batch. If d≤2 1,

(c) judging that the batch of products is qualified.

A. Quantity of nonconforming products B. Quantity of nonconforming products per unit

C. Unqualified quantity D. Unqualified quantity per hundred units

8. Under what circumstances does the control chart need to be reformulated? (BCDE).

A. ideas out of bounds B. environmental changes C. changes in personnel and equipment D. changes in process parameters or adoption of new processes

E. change suppliers or replace raw materials and spare parts.

Four short answer questions (5 points for each question, 20 points for * * *).

1. What is the old seven tools of quality?

Answer: Check the surface classification histogram, Plato fishbone diagram and scatter chart control chart.

2. Briefly explain the meaning of the following contents: "AQL=0.65, IL = G-Ⅱ, 80 (1, 2)" (GB/T 2828.1).

Answer: The worst receiving quality of the inspection lot is 0.65%, the inspection level is general inspection level II, the sampling number is 80, the receiving number is 1, and the rejection number is 2, and 2 of the 80 inspections are unqualified (the number of pieces and the count are poor), which is not accepted by the inspection lot.

3. What are the two criteria for judging control charts?

A: (1) When an idea is out of bounds, it will be judged differently.

(2) Ideas are not randomly distributed.

4. What is the work discipline of the Quality Department?

A:

Five comprehensive application problems (10)

1. Inspectors inspected 2,500 pieces of products in a workshop and found the following defects: 8 pieces of flash, 6 pieces of injection deformation, 2 pieces of missing material 10, 2 pieces of black spots, 4 pieces of color difference and 4 pieces of blisters. Then what is the qualified rate of this batch of products (expressed in PPM)? Plato who assisted engineers in making these products.

Answer: the qualified rate =1-(8+6+10+2+4+4)/2500 *106 = 986400 ppm.

Six test questions

1. Put one marble at a time. How many marbles can a big empty bag hold?

0 1 10 15 I wonder if it is empty after putting it in one.

2. Which number is the most industrious?

02468 I don't know

3. Which number is the laziest?

13579 I don't know

4. Please select the missing numbers: 2, 5, 8, 1 1, ()?

1016121314 I don't know. The difference is all 3.

The workers dug a big hole in the front yard, four meters long, three meters wide and three meters deep. How many cubic meters is the soil? Since it is a hole, there is no soil.

6. In which month do Americans usually eat the least?

1234567891011122 months minimum days.

7. Please select the missing number?

2,5,7

4,7,5

3, 6, () the average value of the above two rows of data.

8. A pair of guinea pigs give birth to a pair of guinea pigs every two months. How many guinea pigs can a guinea pig give birth to every four months? One can't have children.

9. May 1st is Monday. What day is October 1st of the same year? sun

Job responsibilities of inspectors

1. Inspectors should systematically master the inspection methods and standards on which the inspection is based and understand the inspection process.

2. Make all preparations for inspection (including instruments, equipment, reagents, medicines, specimens, etc.). ) and ensure that it meets the inspection requirements.

3. Strengthen the management of precision and precious instruments, check regularly, record the archives of precision and precious instruments, and clarify the responsibilities. Familiar with the functions, characteristics and operation methods of laboratory-related instruments and equipment, have knowledge of maintenance and can carry out simple maintenance. If the instrument is damaged due to violation of operating procedures, it should be handled as appropriate.

4. Abide by the laboratory system, go to work on time, stick to your post at work, and cooperate with the supervisor to strengthen the safety management of the laboratory.

5. Laboratory personnel should always clean and maintain the environmental sanitation of the laboratory, and the instruments and medicines used should be frequently washed and wiped, so that the windows are bright and clean, the countertops are neat, orderly placed, clearly marked and easy to use.

6. Strengthen the management of instruments and equipment to ensure that accounts, cards and materials are consistent. If there is any damage or loss, it must be reported to the competent leader for research and handling. Instruments, equipment and invalid drugs that exceed the specified service life and are seriously damaged beyond repair shall be reported by the laboratory in a unified way and properly disposed after approval. No one is allowed to dismantle it without authorization.

7. Inspectors should strictly control the usage of various drugs in the experiment in the spirit of economy, and should not waste them at will. Damaged instruments will be properly disposed of.

8. The recipients of commonly used instruments and drugs shall be filled in by the inspectors, signed by the superior supervisor and collected in the warehouse. The requisition of precision and valuable instruments shall be signed by the supervisor and general manager. No one may transfer any articles in the laboratory to others, and the borrowing of instruments and medicines by other departments of the company must be approved by the supervisor and go through the borrowing procedures. Foreign units and individuals must obtain the approval of the general manager before they can go through the loan procedures.

9. Strengthen the work, ensure personal safety, prevent electric shock, poisoning, explosion and other dangerous accidents, carefully check whether the doors and windows, water and electricity of each laboratory are closed after work, report any unsafe factors in time, and dump the waste liquid in a unified designated place and destroy it in time.

10. Complete other tasks assigned by superiors.