Ⅰ What information do fire engineers need for on-site audit?

I. Information to be submitted for qualification examination

1. Fill in the basic information and upload photos on the China Personnel Examination website.

2. Registration Form for Qualification Examination of First-class Registered Fire Engineer (China Personnel Examination is printed online, which needs to be audited by the unit and stamped with the official seal).

3. Copy of ID card and academic degree certificate

4 units issued by the fire safety technology work experience certificate.

5. Exemption personnel shall also issue a copy of the qualification certificate and post certificate of senior engineer, or a first-class registered architect certificate and a registered engineer certificate of survey and design.

Second, the qualification examination place

1. The first-class fire engineer qualification examination adopts the principle of localization, and the applicants need to take the above materials to a city (state) public security fire brigade for qualification examination.

2 central and provincial candidates to the local public security fire brigade to write materials for qualification examination.

Third, the responsible unit of audit.

The first-class fire engineer qualification examination is the responsibility of the public security fire brigade, and Ministry of Human Resources and Social Security will conduct spot checks.

(1) Extended reading of post-qualification examination for fire engineers;

"Registered Fire Engineer" refers to the professional and technical personnel who have passed the examination, obtained the qualification certificate of registered fire engineer at the corresponding level, registered according to law, and engaged in fire safety technical work such as fire technical consultation, fire safety assessment, fire safety management, fire safety technical training, fire facilities detection, fire accident technical analysis, fire facilities maintenance, fire safety monitoring and fire safety inspection.

According to the Interim Provisions on the System of Registered Fire Engineers:

The qualification of the first-class registered fire engineer shall be subject to the examination system of unified national outline, unified proposition and unified organization. The exam is held once a year in principle.

The Ministry of Public Security organized the establishment of an expert committee for the qualification examination of registered fire engineers, which was responsible for drawing up the subjects and syllabus for the qualification examination of first-class and second-class registered fire engineers, organizing the proposition work of the qualification examination of first-class registered fire engineers, studying and establishing and managing the examination question bank, and proposing the qualified standards for the qualification examination of first-class registered fire engineers.

Ministry of Human Resources and Social Security organized experts to examine and approve the subjects, outlines and test questions of the first-class and second-class registered fire engineer qualification examination, determined the qualification standards of the first-class registered fire engineer qualification examination jointly with the Ministry of Public Security, and guided, supervised and inspected the examination work.

The administrative departments of human resources and social security of provinces, autonomous regions and municipalities directly under the Central Government shall, jointly with the fire control institutions of public security organs, organize the implementation of the qualification examination for second-class registered fire engineers in accordance with the national unified examination outline and relevant regulations, and study and determine the qualification standards for the qualification examination for second-class registered fire engineers in the region.

Examination questions of first-class registered fire engineer: The examination questions of "Fire Safety Technology Practice" and "Comprehensive Ability of Fire Technology" are objective questions. "Multiple-choice question" requires that one of the options best meets the meaning of the question as the answer.

"Multiple-choice questions" have two or more options for each question, and the wrong choice does not score; Omitted, 0.5 points will be deducted for each question. Among all multiple-choice questions, there are 80 single-choice questions, each with 1 point; 20 multiple-choice questions, 2 points for each question. The fire safety case analysis questions are six subjective questions, and the subjective questions are comprehensive case analysis questions. The total scores of the three subjects were 120.

Examination questions for the second-level registered fire engineer: The examination questions for the subject "Comprehensive Ability of Fire Technology" are objective questions. "Multiple-choice question" requires that one of the options best meets the meaning of the question as the answer. "Multiple-choice questions" have two or more options for each question, and the wrong choice does not score; Omitted, 0.5 points will be deducted for each question.

"Short answer" gives a brief answer according to the questions in the question. Among all multiple-choice questions, there are 50 single-choice questions, each with 1 point; 15 multiple-choice questions, 2 points for each question, 5 short-answer questions, 4 points for each question. The fire safety case analysis questions are subjective questions, and the subjective questions are comprehensive case analysis questions. Total score of two subjects 100.

What are the ways to inquire about the qualification of the second-level fire engineer examination?

There are three types of auditing methods applicable to first-class fire engineers: online system verification, online manual verification and on-site manual internal audit (on-site qualification verification).

System online verification: After the applicant submits the registration information, the online registration system will judge the academic degree, major studied, working years and professional working years, and verify the contents promised by the applicant. Applicants who pass the online verification of the system will directly enter the payment link.

Online manual verification: Applicants whose online verification status is "manual verification required" should upload the electronic copies of relevant certification materials to the registration service platform within the specified time for online manual verification. Online manual verification is organized and implemented by the Provincial Department of Human Resources and Social Security and the Provincial Fire Rescue Corps. Those who pass the verification will directly enter the payment link, please log in to the system in time to check.

On-site manual verification (on-site qualification verification): notify the applicants whose online verification status of the commitment system and system is "failed" that it is not applicable. Please bring relevant materials to the manual verification point at the specified time for on-site manual verification.

Ⅲ Is there any audit after the fire engineer has passed the examination? What are they audited for?

The first-class fire engineer qualification examination is divided into on-site examination, online examination, post-examination examination and exemption examination, as follows:

1, on-site audit

After the online newspaper is successful, the applicant needs to bring the original and photocopy of the registration form, academic certificate and qualification certificate. Go to the designated place for review and determine the qualifications on the spot.

2. Online audit

Log in to the corresponding website, fill in the correct information and submit it according to the prompt, and log in again a few days later to confirm whether it has passed the audit.

3. Post-inspection audit

In some areas, the on-site audit will be conducted after the inspection.

4. No audit is needed

New candidates need to participate in the qualification examination, and old candidates do not need to be examined, so they can register and pay fees directly as required.

On-site audit needs to bring

1, my second-generation identity card

2. Academic certificate+degree certificate

3, online registration "qualification form"

4. Exemption qualification: additional qualification certificate and senior professional and technical post certificate are required.

Additional candidate: additional qualification certificate of cost engineer is required.

(The above certificates are all originals. )

What needs to be done is

1. Print the qualification form on A4 paper.

2. Paste my recent two-inch bareheaded photo (34mm×45mm) 1 at the designated location.

3. The qualification examination form must be audited and sealed by the personnel department or file storage department of the unit where the applicant is located.

4. The work experience of construction management in the qualification form proves that it must be audited by the competent department of construction management of our unit and signed in the designated column.

And seal it (if there is no competent business department, the administrative department of our unit shall sign the opinions and seal it)

I should carefully check and confirm the online registration information. The registration information confirmed by me will not be modified in the online registration, review and registration stages, and all the consequences caused by my wrong filling in.

I took it on myself.

6. The staff at the registration point will check my second-generation resident ID card, academic certificate and Qualification Examination Form.

Specific audit information, each province has different requirements, please refer to the requirements of the application announcement.

Ⅳ Is the first-class registered fire engineer strictly audited after the examination?

If it is not strict and meets the application conditions, the post-examination examination of the first-class registered fire engineer is simpler than the pre-examination examination.

1. Post-qualification examination means that the qualification of candidates who have passed the examination is not examined before the examination, but after the examination. Please pay attention to the local examination documents for specific requirements.

2. Because the exams again and again are conducted by the candidates who have passed the exam, the number of candidates is very small, the scene order will not be chaotic, and there will be no queues from morning till night.

3, the provincial department of human resources and social security, the provincial public security department * * * is responsible for the first-class registered fire engineer qualification examination, and the provincial personnel examination center is responsible for the specific examination work.

4. The Municipal Human Resources and Social Security Bureau and the Public Security Bureau are responsible for the examination registration and prequalification, and the Municipal Personnel Testing Center is responsible for the specific organization and implementation.

Ⅳ Is the post-audit of fire engineers strict? What should I do if he fails?

The manifestations of dishonesty in applying for the exam mainly include false academic qualifications, false academic qualifications, false working years, inconsistency between study and return to work, and false single strokes and seals.

Tips for Dali Education: Those who provide false certification materials will be disqualified and scored once they are found; Those who have obtained the certificate, their scores in all subjects will be invalidated according to the provisions of Decree No.2004. Ministry of Human Resources and Social Security 12, and cancel its professional and technical qualification, withdraw its qualification certificate. Within two years, you shall not participate in the qualification examination of various professional and technical personnel, and within three years, you shall not participate in the qualification examination of first-class construction engineer.

ⅵ Post-examination of fire engineer qualification in Henan Province

Materials required for qualification examination

ID card, graduation certificate or student status file, work experience certificate of the unit, examination registration form or examination registration summary approval form (download the attachment of Henan Personnel Examination Network Examination Notice). Candidates who are exempt from the exam also need to provide the materials required in the application conditions.

ask

First, all candidates should study the notice carefully, pay close attention to the qualification examination notice published by the test area network in time, and take the test at the designated place according to the time requirements;

Second, the examination area should be strictly organized, and the human and social departments and business departments should strengthen work coordination, strengthen service awareness, improve service quality, let candidates run less errands, and realize one-stop service;

Third, each examination area should strictly review the standards, strictly control academic qualifications and actual work experience, and strictly implement the examination policy. It is strictly forbidden to ask candidates for all kinds of wonderful certificates. In line with the principle of who questions who gives evidence, check the candidates' academic qualifications, work experience, social security, etc.

Tips of Dali Education: Those who fail to pass the examination will be disqualified. After the examination in each examination area, the examination results will be reported to the provincial people's social welfare department in time.

7. Is the registered fire engineer audited after passing the examination?

In some areas, there are pre-test audits and some post-test audits.

Post-examination audit: Hunan, Guangdong, Chongqing, Jilin. Registration requires academic credentials.

After the examination, the qualification examination shall be subject to territorial management, and whoever examines it shall be responsible. The Provincial Personnel Examination Bureau is responsible for the qualification examination of qualified personnel who apply for the provincial registration points; The qualification review of the qualified personnel at the registration points of each city shall be the responsibility of the local personnel examination institutions.

Those who provide false certification materials or cheat the examination qualification by other improper means and verify it in the printing process of the admission ticket will be disqualified from the examination and may not take the examination. If it is verified in the online audit link after the examination, the examination results will be cancelled and no certificate will be issued.

In the process of issuing certificates, the examination results will be cancelled, and the issuing authority will declare the certificate invalid and withdraw the certificate. 2 years shall not participate in all kinds of professional and technical personnel qualification examination, involving professional qualification personnel shall not participate in the qualification examination within 3 years. Relevant information will be notified to the candidate's unit, and the examination-related fees will not be refunded.

(7) Extended reading after the qualification of fire engineer.

interim provisions on the system of registered fire engineer

Twelfth registered fire engineer qualification examination registration conditions:

(a) to obtain a college degree in fire engineering, working for 6 years, including 4 years in fire safety technology; Or obtain a college degree in fire engineering related major (see Annex 1, the same below), and have worked for 7 years, including 5 years in fire safety technology.

(two) to obtain a bachelor's degree or degree in fire engineering, and to have worked for 4 years, including 3 years in fire safety technology; Or obtain a bachelor's degree in fire engineering related major, and have worked for 5 years, including 4 years in fire safety technology.

(3) Having obtained a double bachelor's degree in fire engineering or graduated from a postgraduate class, and having worked for 3 years, including 2 years in fire safety technology; Or graduated from a double bachelor's degree or postgraduate program in fire engineering, and worked for 4 years, including 3 years in fire safety technology.

(four) to obtain a master's degree or postgraduate degree in fire engineering, and to have worked for 2 years, of which 1 year has been engaged in fire safety technology; Or obtain a master's degree or postgraduate degree in fire engineering, and have worked for 3 years, including 2 years in fire safety technology.

(five) to obtain a doctorate or degree in fire engineering, engaged in fire safety technology for 1 year; Or obtain a doctorate or degree in fire engineering and have been engaged in fire safety technology for 2 years.

(6) Those who have obtained corresponding academic qualifications or degrees in other majors will have their working years and working years in fire safety technology increased by 1 year.

Is it strictly audited after the 81-level registered fire engineer exam?

It's not strict. The post-examination audit is simpler than the pre-examination audit if the first-class registered fire engineer meets the registration conditions.

Post-qualification examination refers to the qualification examination of candidates who have passed the examination after the examination without examining the registration qualification before the examination. Please pay attention to the local examination documents for specific requirements.

Because the post-examination examination is conducted by the candidates who have passed the examination, the number is very small, the order on the spot will not be chaotic, and there will be no queues from morning till night.

The first-class registered fire engineer qualification examination is jointly undertaken by the Provincial Department of Human Resources and Social Security and the Provincial Public Security Department, and the specific examination work is undertaken by the Provincial Personnel Testing Center.

Examination registration and qualification examination are jointly undertaken by the Municipal Human Resources and Social Security Bureau and the Public Security Bureau. The specific organization and implementation of registration is the responsibility of the Municipal Personnel Testing Center.