The technical training provided by general manufacturers is one week. The basic operation can be understood in a week. If you want to learn it completely, this is hard to say. Three-coordinate function is very rich. Mainly by the accumulation of time.
Matters needing attention in three-coordinate measurement
First, in order to carry out precise measurement, it is necessary to keep the laboratory clean and free from oil pollution, keep the indoor temperature at about 20 degrees Celsius and the air pressure at about 0.5mpa, and wipe it clean with alcohol before and after use, so as to prevent the measuring instrument from rusting and make the measuring instrument more accurate.
Second, during the coordinate measurement, we should check the temperature and humidity, see how the air pressure is, and let out the oil and water in the filter. After running for a period of time, it is necessary to check whether the measuring instrument can work normally.
Third, when measuring, the staff need to carefully check the drawings of the parts and fully understand the measurement requirements and methods. When placing the measured parts, the safety of the probe in motion must be ensured. In order to ensure that measuring instruments and parts are not damaged, it is necessary to determine the placement position of parts and fix them firmly.