Installation of microphone bracket
Microphone stand is an indispensable part of live broadcast. Before installation, it is necessary to fix the bracket base. You can choose to clamp it on the edge of the desktop or directly put it horizontally on the desktop, but make sure it is firmly fixed. Then, adjust the height of the microphone to make sure it is flush with your mouth. Finally, insert link cable, make sure the other end is properly connected to the microphone power supply.
Link to external sound card
Find the output port of the microphone power supply and plug the other end of the connecting cable into the "condenser microphone" port of the external sound card. External sound cards usually have a T-shaped USB interface. Find the corresponding cable and plug it into the computer. So your voice can be transmitted to the audience through an external sound card!
Link to camera
For live computer broadcast, you need a camera. Plug the USB cable of the camera into the computer case, and now the mainstream cameras are installed without drivers. If you need to install the driver, there is usually an installation CD in the hardware package, and you can also find the corresponding network driver download address in the manual.
Install speakers or monitor headphones.
Loudspeaker is an important device for transmitting sound in live broadcast. Install the speakers independently on the computer case. If a separate power supply is required, make sure it is connected correctly. Headphones can be plugged into the jack marked with the headset icon on the computer chassis. Only in this way can you hear your voice clearly and ensure the best live broadcast effect!
Guided debugging
When all the equipment is ready, start debugging. Check the connectivity, height, angle and distance of the equipment to ensure that everything is perfect.