Current location - Training Enrollment Network - Education and training - How to use tire-patching liquid?
How to use tire-patching liquid?
There are two kinds of tire patching liquid, one is automatic tire patching liquid, and the glue and gas are pumped together after the tire is deflated; The other is non-automatic tire repair liquid, which is injected into the tire along the valve core with a catheter and then inflated.

There are two kinds of tire patching liquid, one is tire patching and inflation, and the other is tire patching only. However, they all have one thing in common, that is, the damaged area should not be too large, and they can be used with ordinary nails. After use, if the nail is stuck again, the nail will be stuck by the glue inside, and the nail is still there, but it will not leak.

1. Automatic tire patching liquid

Tire repair and inflation is an automatic tire repair liquid. You have to deflate the tire, and then shake the tire repair liquid evenly with the valve core intact, with your mouth facing the valve core as far as possible. Then turn on the switch of the tire repair liquid bottle. Glue and gas go in together until the tire is full. Turn off the switch on the bottle. Just give the tires a quick spin.

2. Non-automatic tire repair liquid

Unscrew the valve core with tweezers, shake the tire repair liquid evenly, and inject it into the tire along the valve core with a catheter. After inflation, screw back the valve core and inflate the tire with the inflation tube. Then rotate the tire quickly so that the tire patching liquid is evenly distributed on the surface.

What are the tire repair methods for cars?

1. patch method

In this way, the tire is separated from the hub, and then special glue is coated around the fracture, and then it is fixed with a patch and a glue layer. This kind is suitable for most wounds, not for big wounds, with high cost performance and affordable price.

2. Hot patching method

That is to say, on the basis of patch method, heating the wound position is very suitable for vehicles with thick tire wall.

3. Strip method

It is to stick the adhesive tape with glue and then insert it into the wound of the tire. This method of tire repair is very simple, and it will leak again in the later use process, so it can only be used in an emergency.

4. Mushroom nail method

That is, put the mushroom nail into the tire wound, and then stick the top of the mushroom nail out from the outside. Then clamp the top of the mushroom nail with pliers, pull it out and stick it on, and then cut off the exposed excess. This is suitable for big wounds.